Skip to content
thecalculatorstudio

Mulch Calculator: How Much Mulch Do I Need?

Add each bed as a rectangle or a circle, set the depth and the size of the bags you buy. You get the cubic yards for a bulk delivery, the number of whole bags, and how far one bag goes.

Last reviewed

Bed 1
ft
ft
in
%

Cubic yards of mulch

0.93

100.0 sq ft at 3.00 in

Bags to buy
13
Cubic feet
25.00
Cubic metres
0.708
One bag covers
8.0 sq ft

Bags are rounded up to whole bags (12.50 bags exactly). Bulk mulch is sold by the cubic yard, bagged mulch by the bag, so check which unit your supplier uses.

What this calculator does

Describe your beds, choose how deep the mulch will go, and say how big your bags are. The calculator gives you the cubic yards to order from a landscape supplier, the number of whole bags if you buy them bagged, and how many square feet one bag covers at your depth.

A bed can be a rectangle (length and width) or a circle (diameter). You can add several beds, and measure them in feet, inches, yards, metres or centimetres. The depth can be in inches, centimetres or millimetres. Bag sizes can be entered in cubic feet or litres, whichever is printed on the bag.

Reading the result

The headline is the cubic yards of mulch for all beds together. Under it:

  • Bags to buy is the volume divided by the bag size, rounded up to a whole bag.
  • Cubic feet and cubic metres are the same volume in other units.
  • One bag covers is the area a single bag spreads over at your depth, which is a quick sense check on the bed.

The optional extra box adds a percentage to everything. It starts at zero, because the right allowance depends on how level the beds are and how you spread the mulch.

The formula

Texas AgriLife Extension gives the rule used for mulch, soil and compost:

cubic yards = area (square feet) × depth (inches) ÷ 324

It works because a cubic yard is 27 cubic feet, one inch is 1/12 of a foot, and 27 × 12 = 324. The same guide offers a shortcut factor, multiplying by 0.0031, which is 1/324 rounded. If you buy bags of 1 cubic foot, multiply the cubic yards by 27 to get the bag count.

This calculator works the volume out in cubic feet (area in square feet times depth in feet) and divides by 27, which gives the same answer for any unit you use.

Worked examples

A square bed. 10 ft by 10 ft at 3 inches deep. The area is 100 sq ft, the volume is 100 × 0.25 ft = 25 ft³, and 25 ÷ 27 = 0.93 yd³. That agrees with the extension guide’s own example. In bags of 1 cubic foot you need 25; in bags of 2 cubic feet you need 12.5, so 13. Each 2 cubic foot bag covers 2 ÷ 0.25 = 8 sq ft.

A round bed. A circle 6 ft across at 2 inches deep. The area is π × 3 × 3 = 28.27 sq ft, the volume is 28.27 ÷ 6 = 4.71 ft³, which is 0.17 yd³ or 3 bags of 2 cubic feet.

Two beds. A 10 ft by 4 ft bed and a round 6 ft bed, both at 3 inches. The areas add to 40 + 28.27 = 68.27 sq ft, the volume is 17.07 ft³, which is 0.63 yd³.

Metric. 10 m² at 5 cm deep is 0.5 m³, which is 0.654 yd³ or 17.66 ft³. In 50 litre bags (0.05 m³ each) that is 10 bags.

Reference: cubic yards by area and depth

Area × depth ÷ 324, to two decimals:

Area (sq ft) 1 inch 2 inches 3 inches 4 inches
50 0.15 0.31 0.46 0.62
100 0.31 0.62 0.93 1.23
200 0.62 1.23 1.85 2.47
500 1.54 3.09 4.63 6.17
1,000 3.09 6.17 9.26 12.35

And the area one bag covers, in square feet:

Bag size 2 inches 3 inches 4 inches
1 cubic foot 6 4 3
1.5 cubic feet 9 6 4.5
2 cubic feet 12 8 6
3 cubic feet 18 12 9

A metric shortcut and a rule of thumb

In metric units the same rule is simpler: cubic metres = area (m²) × depth (cm) ÷ 100. For 10 m² at 5 cm that is 10 × 5 ÷ 100 = 0.5 m³, which agrees with the example above.

In US units, every extra inch of depth over 100 square feet adds 100 ÷ 324 = 0.31 cubic yards, which is about 8.3 cubic feet. So if a bed of 100 sq ft needs 0.93 yd³ at 3 inches, it needs about 1.23 yd³ at 4 inches. That is a useful way to see what a deeper layer costs you in material before you order.

Measuring awkward beds

Most beds are not neat. Walk the edge and divide the shape into rectangles and circles that roughly match it. Add each as its own bed in the calculator. For a half circle, enter the full circle and halve the result, or enter two rectangles that cover the same area. Where a bed has a tree or a stone in it, enter the bed whole and accept a little extra, since this calculator adds areas but does not subtract them.

Getting the quantity right

  • Measure the bed, not the lawn around it. Use the planting area. For an irregular bed, split it into rectangles and circles and add them.
  • Use the depth you will actually spread. The quantity is directly proportional to depth, so a half inch of difference over a large bed is a real amount of mulch.
  • Pick bulk or bags by the quantity. A cubic yard is 13.5 bags of 2 cubic feet, so for a large bed it is worth asking your supplier for a price by the yard as well as by the bag.
  • Loose material settles. Fresh mulch compacts and breaks down, which is the reason for the optional allowance.
  • Mulch, soil and compost use the same maths. For other materials sold by weight, such as gravel, see the gravel calculator.

Frequently asked questions

How do I calculate how much mulch I need?

Multiply the area of the bed in square feet by the depth in inches and divide by 324 to get cubic yards. That is the method published by Texas AgriLife Extension. For a 10 ft by 10 ft bed at 3 inches deep, 100 × 3 ÷ 324 = 0.93 cubic yards.

Where does 324 come from?

A cubic yard is 27 cubic feet, and covering one square foot to one inch deep takes 1/12 of a cubic foot. So one cubic yard covers 27 × 12 = 324 square feet at a depth of one inch, 162 at two inches and 108 at three.

How many bags of mulch is a cubic yard?

It depends on the bag. A cubic yard is 27 cubic feet, so it is 27 bags of 1 cubic foot, or 13.5 bags of 2 cubic feet. The extension guide gives the same rule for 1 cubic foot bags: multiply the cubic yards by 27. Check the volume printed on the bag, because sizes vary.

How deep should mulch be?

That depends on the plants, the mulch and your climate, so the calculator does not choose a depth for you. Enter the depth recommended for what you are growing, and it shows how the quantity changes: doubling the depth doubles the mulch. Your local extension office can advise on depth.

Why does the calculator round bags up?

You cannot buy part of a bag, and being a little short means a second trip. With 12.5 bags needed, it tells you to buy 13 and also shows the exact 12.5 so you can judge whether a smaller extra allowance would do.

Does this work for topsoil, compost and gravel too?

Yes for the volume, because a cubic yard is a cubic yard of anything. Gravel is usually sold by weight, so the gravel calculator adds a density. Topsoil and compost are often sold by the cubic yard or in bags, exactly like mulch.

Related calculators

Sources