Gravel Calculator: Cubic Yards and Tons of Gravel or Stone
Add each area as a rectangle or a circle, set the depth, and enter the density your supplier quotes. You get the cubic yards and the tons to order, with an allowance for settling.
Last reviewed
Short tons to order
4.28
3.06 cubic yards, including 10% extra
- Cubic yards (no extra)
- 2.778
- Cubic feet (no extra)
- 75.00
- Metric tonnes to order
- 3.88
- Pounds to order
- 8,556
- Short tons (no extra)
- 3.889
- Density used
- 1.400 tons/yd³
The weight depends entirely on the density you enter, which varies with the stone, its size and its moisture. Use your supplier's figure, since they sell by the ton.
What this calculator does
Gravel is bought by the ton but spread by the cubic yard, so the question “how much do I need?” has two parts: how much space does the layer fill, and what does that volume weigh? This calculator answers both. Describe the areas (rectangles or circles), set the depth, and enter the density of the stone. It returns the volume in cubic yards and cubic feet and the weight in short tons, metric tonnes and pounds.
You can add several areas, such as a driveway and a turnaround, measure in feet, inches, yards, metres or centimetres, and add an allowance for settling and waste.
Why the density is yours to enter
The volume is pure geometry. The weight is not. A cubic yard of crushed limestone, of rounded river gravel and of sand all weigh different amounts, and the same stone weighs more wet than dry and more compacted than loose.
For scale, Penn State’s civil engineering notes, citing Mindess, give a dry-rodded unit weight of 1,100 to 1,750 kg/m³ for normal-weight aggregate. In other units that is 0.93 to 1.47 short tons per cubic yard, or 68.7 to 109.2 pounds per cubic foot. The calculator starts at 1.4 short tons per cubic yard, a figure suppliers often quote for crushed stone, which sits near the top of that range. Replace it with the number your supplier gives you.
You can enter the density in short tons per cubic yard, pounds per cubic foot or kilograms per cubic metre. The page converts between them exactly, using 1 short ton = 2,000 lb = 907.18474 kg and 1 cubic yard = 0.764554857984 m³.
Reading the result
The headline is the short tons to order, including your extra allowance. Under it are the cubic yards to order, the metric tonnes and pounds, and the figures before the allowance. The last box shows the density used, converted into tons per cubic yard so you can compare it with your supplier’s number.
The formulas
cubic yards = area (sq ft) × depth (ft) ÷ 27
short tons = cubic yards × density (short tons per cubic yard)
Because a cubic yard is 27 cubic feet, a density of 100 lb/ft³ means 27 × 100 = 2,700 lb per cubic yard, which is exactly 1.35 short tons. The order quantity multiplies both volume and weight by (1 + extra ÷ 100).
Worked examples
A driveway strip. 30 ft by 10 ft, 3 inches deep. The area is 300 sq ft, the volume is 300 × 0.25 = 75 ft³, which is 75 ÷ 27 = 2.78 yd³. At 1.4 tons per cubic yard that is 3.89 short tons, or 3.53 tonnes. With 10% extra, order 4.28 tons (8,556 lb), which is 3.06 yd³.
A deeper base. 300 sq ft at 4 inches is 100 ft³, or 3.70 yd³, and at the same density 5.19 tons.
A round pad. 10 ft across at 4 inches. The area is π × 25 = 78.54 sq ft, the volume is 26.18 ft³ or 0.97 yd³, and the weight is 1.36 tons.
Metric. 20 m² at 10 cm deep is 2 m³. At a density of 1,700 kg/m³ that is 3,400 kg, or 3.4 tonnes, which is 3.75 short tons.
Reference: density, and what a ton covers
| Density (kg/m³) | Short tons per yd³ | Pounds per ft³ |
|---|---|---|
| 1,100 | 0.927 | 68.7 |
| 1,300 | 1.096 | 81.2 |
| 1,500 | 1.264 | 93.6 |
| 1,750 | 1.475 | 109.2 |
At 1.4 short tons per cubic yard, one ton fills 27 ÷ 1.4 = 19.3 cubic feet. That covers:
| Depth | Square feet per ton |
|---|---|
| 2 inches | 115.7 |
| 3 inches | 77.1 |
| 4 inches | 57.9 |
| 6 inches | 38.6 |
At a different density the coverage changes in proportion: stone that is 10% denser covers 10% less.
Checking a supplier’s quote
If a supplier tells you how many tons they will deliver for a number of cubic yards, divide one by the other to find the density they are using. Say they quote 12 tons for 10 cubic yards. That is 1.2 tons per cubic yard, which is 1.2 × 2,000 ÷ 27 = 88.9 pounds per cubic foot, or 1,424 kg/m³ (1.2 × 907.18474 ÷ 0.764554857984). Enter 1.2 as the density, and the calculator will give you tons for your own area at the same density.
If the figure looks far outside the range above, ask what the material is and whether the weight is measured wet. A quote well below 0.93 or well above 1.47 tons per cubic yard is not impossible for unusual materials, but it is worth a question.
Ordering well
- Ask for the density and the unit. Some suppliers quote tons per cubic yard, others pounds per cubic foot. Convert here to compare them.
- Check whether the quote is loose or compacted. Loose stone shrinks as it is compacted, which is what the extra allowance is for.
- Measure the depth you will compact to. A layer spread loose will be thinner once it is rolled, so decide whether your depth is the loose or the finished one.
- Allow for the edges. A path that tapers or a driveway that widens at the gate is easier to enter as two or three shapes.
- Round up to what the truck carries. Ask how the supplier delivers, because a small shortfall can mean paying for a second trip.
Frequently asked questions
How do I calculate how much gravel I need?
Multiply the area in square feet by the depth in feet to get cubic feet, divide by 27 for cubic yards, then multiply by the density in tons per cubic yard. A 30 ft by 10 ft area at 3 inches deep is 75 cubic feet, which is 2.78 cubic yards, and at 1.4 tons per cubic yard that is 3.89 tons.
How many tons are in a cubic yard of gravel?
It depends on the stone. Penn State's notes give 1,100 to 1,750 kg/m³ for the dry-rodded unit weight of normal-weight aggregate, which is 0.93 to 1.47 short tons per cubic yard. Suppliers often quote figures near the top of that range for crushed stone, and the calculator starts at 1.4. Use the density your supplier gives you.
Why is the density an input and not a menu of gravel types?
Because the weight of a cubic yard changes with the type of stone, the size of the pieces, how much fine material it holds, its moisture and how tightly it is packed. A fixed figure for each type would look precise and be wrong for your delivery. Your supplier sells by the ton, so they know their material.
Are tons here short tons or metric tonnes?
The headline is US short tons of 2,000 pounds, the unit stone is sold in in the United States. The results also show metric tonnes (1,000 kg). One short ton is 0.90718474 tonnes, and one tonne is 1.1023 short tons.
How much extra gravel should I order?
The calculator adds an allowance for settling, spillage and uneven ground and starts it at 10%. The right figure depends on the base and how it will be compacted, so treat 10% as a starting point and ask your supplier or installer.
Does this work for sand, crushed concrete or road base?
Yes. Any loose material sold by the cubic yard or the ton follows the same method; only the density changes. Enter the density the supplier states for that material, in whichever unit they use.
Related calculators
- Cubic Yards CalculatorEnter each section of the job as a rectangle or a circle, with its depth, and add an allowance for waste.
- Square Feet to Cubic Yards CalculatorEnter the area and the depth of the layer.
- Mulch CalculatorAdd each bed as a rectangle or a circle, set the depth and the size of the bags you buy.
- Asphalt CalculatorAdd the areas to pave as rectangles or circles, enter the compacted thickness and the weight of the mix, and you get the tons to order, with the square yards, cubic yards and tonnes.
- Cubic Feet CalculatorPick a shape, choose your unit and enter the measurements.
- Weight ConverterConvert any weight.
- Square Footage CalculatorAdd each part of the room or plot as a shape, say whether it is added or taken away, and measure in feet, inches, yards, metres or centimetres.
- Stair CalculatorEnter the floor-to-floor height and the tread depth.