Asphalt Calculator: Tons of Asphalt for a Driveway or Lot
Add the areas to pave as rectangles or circles, enter the compacted thickness and the weight of the mix, and you get the tons to order, with the square yards, cubic yards and tonnes.
Last reviewed
Short tons of asphalt
8.80
80.0 sq yd at 2.00 in
- Metric tonnes
- 7.98
- Pounds
- 17,600
- Cubic yards
- 4.44
- Square feet
- 720.0
- Mix weight
- 146.7 lb/ft³
- One ton covers
- 81.8 sq ft
The mix weight depends on the aggregate, the binder and how well the mat is compacted. Use the figure from your job mix formula, and the compacted, not the loose, thickness.
What this calculator does
Hot-mix asphalt is ordered by the ton, but you measure a paving job in feet or metres: an area and a thickness. This calculator turns one into the other. Add the areas to be paved, as rectangles or circles, enter the compacted thickness and the weight of the mix, and it returns the tons of asphalt, with square yards, cubic yards, metric tonnes and pounds.
You can add several areas, such as a driveway and a parking pad, measure in feet, yards, inches, metres or centimetres, and enter the thickness in inches, centimetres or millimetres. The mix weight can be given in pounds per square yard per inch, pounds per cubic foot or kilograms per cubic metre.
Reading the result
The headline is the short tons to order. Under it:
- Metric tonnes and pounds are the same weight in other units.
- Cubic yards and square feet describe the volume and the area.
- Mix weight shows your figure converted to pounds per cubic foot, for comparison with a plant’s number.
- One ton covers is the area, in square feet, that one ton paves at your thickness.
The optional extra box adds a percentage to the tons. It starts at zero because the right allowance depends on the base and the contractor.
The mix weight
The weight of asphalt per unit of volume depends on the stone in it, the amount of binder and how tightly it is compacted. The Pennsylvania Asphalt Pavement Association’s field checklist says a typical compacted mix weighs 108 to 120 pounds per square yard per inch of thickness (lb/sy/in), or 144 to 160 pounds per cubic foot, and its worked tables use 110 lb/sy/in, or 147 lb/ft³. It also says to take the real figure from the job mix formula for your project.
The two units are tied together: a square yard one inch thick is 9 ft² × 1/12 ft = 0.75 ft³, so the pounds per cubic foot is the pounds per square yard per inch times 4/3. That makes 108 equal to 144 and 120 equal to 160, which matches the checklist’s two ranges, and 110 equal to 146.67, which the checklist rounds to 147. The calculator starts at 110.
The formula
tons = area (sq yd) × thickness (in) × weight (lb/sy/in) ÷ 2,000
The area in square yards is the area in square feet divided by 9. Dividing by 2,000 turns pounds into short tons. Metric tonnes are the pounds times 0.45359237 divided by 1,000.
Worked examples
A parking area. 18,500 sq ft at 2 inches compacted, mix weight 110 lb/sy/in. The area is 18,500 ÷ 9 = 2,055.6 sq yd. The weight is 2,055.6 × 2 × 110 = 452,222 lb, which is 226.1 short tons, or 205.1 tonnes. A 10% extra allowance would make it 248.7 tons.
The effect of the mix weight. The same job at 108 lb/sy/in is 222 tons, and at 120 lb/sy/in it is 246.7 tons. The checklist’s range moves the answer from 222 to 246.7 tons, a spread of about 11%, so use your plant’s figure.
A round pad. A circle 20 ft across at 2 inches: the area is π × 100 = 314.16 sq ft, which is 34.9 sq yd, and the weight is 34.9 × 2 × 110 = 7,679 lb, or 3.84 tons.
Metric. 100 m² at 50 mm is 5 m³. At 110 lb/sy/in, which is about 2,349 kg/m³, that is 11,747 kg, or 11.75 tonnes.
Reference: tons for common jobs and thicknesses
At 110 lb/sy/in, tons per 1,000 square feet:
| Compacted thickness | Tons per 1,000 sq ft |
|---|---|
| 1 inch | 6.11 |
| 1.5 inches | 9.17 |
| 2 inches | 12.22 |
| 3 inches | 18.33 |
| 4 inches | 24.44 |
Some whole jobs at 2 inches:
| Job | Area | Tons |
|---|---|---|
| One parking space, 9 ft × 18 ft | 162 sq ft | 1.98 |
| Driveway, 12 ft × 50 ft | 600 sq ft | 7.33 |
| Pad, 24 ft × 24 ft | 576 sq ft | 7.04 |
And how long a strip one ton makes at 110 lb/sy/in, in feet:
| Strip width | 1 inch | 2 inches | 3 inches |
|---|---|---|---|
| 8 ft | 20.45 | 10.23 | 6.82 |
| 10 ft | 16.36 | 8.18 | 5.45 |
| 12 ft | 13.64 | 6.82 | 4.55 |
At a different mix weight every figure scales in proportion.
Things to check before you order
- Use the compacted thickness. It is the thickness of the finished mat. The same weight of mix goes into a thinner layer once it is rolled.
- Take the density from the job mix. The 110 lb/sy/in figure is a typical value, not a specification.
- Measure the real area. Curves, turnarounds and aprons add area that a rectangle misses. Add them as extra shapes.
- Ask about minimums and delivery. Ask the plant or contractor about minimum quantities and how the mix is delivered, which this page cannot know.
- Allow for the base. The calculator covers the asphalt layer only. Stone base, tack coat and preparation are separate quantities.
Frequently asked questions
How do I calculate tons of asphalt?
Convert the area to square yards (divide square feet by 9), multiply by the compacted thickness in inches and by the weight in pounds per square yard per inch, then divide by 2,000. For 18,500 sq ft at 2 inches and 110 lb/sy/in: 2,055.6 × 2 × 110 ÷ 2,000 = 226.1 tons.
How much does a square yard of asphalt weigh per inch of thickness?
The Pennsylvania Asphalt Pavement Association says a typical compacted mix weighs 108 to 120 pounds per square yard per inch, which is 144 to 160 pounds per cubic foot, and its tables use 110. The exact figure depends on the aggregate, the binder content and the compaction, so use the one on your job mix formula.
Is the thickness the loose or the compacted thickness?
Enter the compacted thickness, the finished depth of the mat. Hot mix is thicker when it is laid and is rolled down, so a quantity worked out from the laid thickness would be too high. The 110 lb/sy/in figure refers to the compacted material.
How far does one ton of asphalt go?
At 110 lb/sy/in, one ton covers 2,000 ÷ 110 = 18.18 square yards at one inch, which is 163.6 square feet. At two inches it covers half that, 81.8 square feet. An 8 ft wide strip 2 inches thick gets 10.2 feet of length from a ton.
Are these short tons or metric tonnes?
The headline is in US short tons of 2,000 pounds, the unit used in US paving. The page also shows metric tonnes: one short ton is 0.90718474 tonnes. The 18,500 sq ft example is 226.1 short tons, or 205.1 tonnes.
Should I order extra?
Many jobs allow a little over the calculated amount for uneven subgrade and trimming, so the calculator has an optional extra percentage that starts at zero. How much to add depends on the base and the contractor, so ask the paving contractor or the plant.
Related calculators
- Gravel CalculatorAdd each area as a rectangle or a circle, set the depth, and enter the density your supplier quotes.
- Cubic Yards CalculatorEnter each section of the job as a rectangle or a circle, with its depth, and add an allowance for waste.
- Square Feet to Cubic Yards CalculatorEnter the area and the depth of the layer.
- Square Footage CalculatorAdd each part of the room or plot as a shape, say whether it is added or taken away, and measure in feet, inches, yards, metres or centimetres.
- Weight ConverterConvert any weight.
- Cubic Feet CalculatorPick a shape, choose your unit and enter the measurements.
- Area ConverterConvert any area.
- Concrete CalculatorEnter the size of your slab, footing, wall, column or post holes.