Square Feet to Cubic Yards Calculator (Concrete, Soil, Mulch)
Enter the area and the depth of the layer. You will see the cubic yards to order, with an allowance for waste, for concrete, soil, gravel or mulch.
Last reviewed
Cubic yards
4.938
5.432 with 10% extra
- Cubic feet
- 146.667
- Cubic yards
- 5.432
- Cubic metres
- 4.1531
- US gallons
- 997.4
Area is flat, so it needs a depth to become a volume. Measure the depth you will actually fill, and add an allowance for waste and uneven ground.
The sum, in two steps
Concrete, soil, gravel and mulch are usually sold by the cubic yard, but you measure the job in square feet and a depth. The conversion takes two steps:
- Cubic feet = square feet × depth in feet. The depth is usually given in inches, so divide by 12 first.
- Cubic yards = cubic feet ÷ 27. A cubic yard is 3 feet by 3 feet by 3 feet, which is 27 cubic feet.
Put together:
Cubic yards = square feet × depth in inches ÷ 324
Because 12 × 27 = 324. For a quick check, that is the one number to remember.
A worked example: a concrete slab
A slab 20 ft by 20 ft, 4 inches thick.
- Area: 20 × 20 = 400 square feet
- Depth: 4 ÷ 12 = 0.3333 feet
- Volume: 400 × 0.3333 = 133.33 cubic feet
- In cubic yards: 133.33 ÷ 27 = 4.938 cubic yards
Now add an allowance for waste. This is the amount you order, not the amount the slab needs.
| Extra | Cubic yards to order |
|---|---|
| None | 4.938 |
| 5% | 5.185 |
| 10% | 5.432 |
The calculator starts at 10% so you can see the effect. Change it, or set it to 0.
What a cubic yard covers
Turn the question round. How much area does one cubic yard cover at a given depth?
| Depth | Area covered by 1 cubic yard |
|---|---|
| 1 inch | 324 square feet |
| 2 inches | 162 square feet |
| 3 inches | 108 square feet |
| 4 inches | 81 square feet |
| 6 inches | 54 square feet |
| 12 inches | 27 square feet |
These are exact: 324 divided by the depth in inches. They are useful for a quick estimate. For a 4-inch layer, divide the area by 81. A 400 square foot slab is 400 ÷ 81 = 4.94 cubic yards, the same as above.
Common jobs
- Concrete slab, path or patio. Area times the thickness. Allow for the depth being a little more in places.
- Mulch or bark. Spread to a depth of a few inches over a bed. 200 square feet at 3 inches is 50 cubic feet, or 1.85 cubic yards.
- Topsoil or compost. The depth depends on what you are doing: filling a raised bed to the top is a different quantity from dressing a lawn.
- Gravel or crushed stone. Under paving or in a drive. The layer is often in inches, and may be in more than one course.
- Fill. Measure the depth, allow for settling, and ask the supplier whether the quantity is loose or compacted.
Measuring up
- Area. For a rectangle, length times width in feet. For a circle, π times radius squared. For an odd shape, split it into simple pieces and add them.
- Depth. Measure it at several points and take the average. Ground that slopes, or a slab that is thicker at its edges, needs more than the thinnest depth suggests.
- Units. Everything in feet, or let the calculator convert from inches, yards, centimetres or metres.
Ordering
The calculator gives you the volume to cover your area. How it is ordered depends on the material and the supplier.
- Ask how they sell it: by the cubic yard, by weight, or by the bag. Bagged products give their coverage on the bag.
- Ask about minimums and how they round. Some suppliers round up to the next quarter or half yard.
- Allow for waste. The percentage you add is a judgment about the job: how level the ground is, how much will be spilled, how much you can afford to be short.
- Do not order short. Running out part-way through a concrete pour is much worse than having a little left over.
Metric
For square metres and centimetres, the sum is the same, and the answer comes out in cubic metres. 10 square metres at 15 cm is 1.5 cubic metres, which is 1.962 cubic yards or 52.97 cubic feet. The calculator shows all of them.
Common mistakes
- Dividing by 27 before getting to cubic feet. The depth has to be in feet first.
- Using inches for the depth. 400 × 4 is 1,600, not a volume. Divide by 12, or use the 324 shortcut.
- Forgetting the waste. The slab needs 4.938 yards. You will want to order more.
- Rounding down. Round up to the next quantity your supplier sells.
Related conversions
For cubic feet on their own, see the square feet to cubic feet converter, and for turning a volume of water into gallons, the cubic feet to gallons converter. The area converter changes between square feet, square yards, square metres and acres, and the volume converter covers every volume unit.
How it is calculated
The area is converted to square metres and the depth to metres, using the exact definitions of the foot, the yard and the inch. They are multiplied to give cubic metres, and then converted to cubic yards by dividing by the exact 0.764554857984 cubic metres in a cubic yard. The waste allowance multiplies the volume by one plus the percentage. The arithmetic is in 40-digit decimals, and the answer is rounded only for display.
Frequently asked questions
How do I convert square feet to cubic yards?
Multiply the area by the depth in feet to get cubic feet, then divide by 27, because a cubic yard is 3 × 3 × 3 = 27 cubic feet. 400 square feet at 4 inches is 133.33 cubic feet, or 4.938 cubic yards.
How much concrete do I need for a slab?
Area times thickness gives the volume. A 20 ft by 20 ft slab, 4 inches thick, is 4.938 cubic yards. With 5% extra it is 5.185, and with 10% extra it is 5.432. Ask your supplier how they round and what the minimum is.
How many square feet does a cubic yard cover?
It depends on the depth: 324 square feet at 1 inch, 162 at 2 inches, 108 at 3 inches, 81 at 4 inches, 54 at 6 inches and 27 at 12 inches. A cubic yard is 27 cubic feet, divided by the depth in feet.
Why is the answer in cubic yards and not cubic feet?
Bulk materials such as concrete, soil, gravel and mulch are usually sold by the cubic yard in the US. Dividing cubic feet by 27 converts to the unit the supplier uses.
How much extra should I order?
There is no fixed figure. Ground is uneven, edges spill and some material is lost. The box for extra adds a percentage, and your supplier or contractor can advise on how much suits the material and the job.
Can I use metres?
Yes. Choose square metres for the area and centimetres or millimetres for the depth. 10 square metres at 15 cm is 1.5 cubic metres, which is 1.962 cubic yards.
Related calculators
- Square Feet to Cubic Feet ConverterSquare feet measure a surface and cubic feet measure a space, so you need a depth to convert.
- Cubic Feet to Gallons ConverterEnter a volume in cubic feet and read it in gallons.
- Area ConverterConvert any area.
- Volume ConverterConvert any volume.
- Length ConverterConvert any length or distance.
- Water Weight ConverterEnter a volume or a weight of water and its temperature.
- Litres to Tons ConverterThere is no single number of litres in a ton, because it depends on the liquid.