Skip to content
thecalculatorstudio

Water Weight Converter: Gallons, Litres and Pounds

Enter a volume or a weight of water and its temperature. A US gallon of water weighs about 8.34 pounds, a little more when cold and less when hot.

Last reviewed

Weight of the water

8.3376 lb

at 60.0 °F (15.6 °C), density 0.99907 kg per litre

Kilograms
3.7819
Pounds
8.3376
Grams
3,781.89
Ounces
133.402

Density is from the U.S. Geological Survey table for liquid water at standard pressure, interpolated between its rows. Salt and other dissolved substances make water heavier.

How much water weighs

The short answer people want is “a gallon of water weighs 8.34 pounds”. It is the right figure for a US gallon at about 60 °F. The longer answer is that water’s weight depends on its temperature, and the converter gives you the figure for the temperature you have.

Water Weight
1 US gallon 8.34 pounds (3.78 kg)
1 UK gallon 10.01 pounds (4.54 kg)
1 litre 1 kilogram (2.2 pounds)
1 cubic foot 62.4 pounds (28.3 kg)
1 cubic metre 1,000 kilograms (about 1 tonne)

The litre and the kilogram are close by design: a litre of cold water is very nearly a kilogram.

Why it changes with temperature

Water expands when it warms, so a gallon of warm water holds slightly less water than a gallon of cold. The U.S. Geological Survey publishes a table of density at different temperatures. Water is densest at about 4 °C (39.2 °F), where the table gives 1.00000 grams per cubic centimetre, which is 1 kilogram per litre.

Here is the weight of a US gallon at each of the temperatures in the USGS table:

Temperature Density (kg per litre) One US gallon One cubic foot
32 °F (0 °C) 0.99987 8.3443 lb 62.420 lb
39.2 °F (4 °C) 1.00000 8.3454 lb 62.428 lb
50 °F (10 °C) 0.99975 8.3433 lb 62.412 lb
60 °F (15.6 °C) 0.99907 8.3376 lb 62.370 lb
70 °F (21 °C) 0.99802 8.3289 lb 62.304 lb
80 °F (26.7 °C) 0.99669 8.3178 lb 62.221 lb
100 °F (37.8 °C) 0.99318 8.2885 lb 62.002 lb
140 °F (60 °C) 0.98338 8.2067 lb 61.390 lb
180 °F (82.2 °C) 0.97056 8.0997 lb 60.590 lb
212 °F (100 °C) 0.95865 8.0003 lb 59.847 lb

From freezing to boiling, a gallon loses about 0.34 pounds, a little over 4%. For most jobs the difference is smaller than the error in measuring the volume.

A note on the exact figure

The USGS notes that the exact density of water at 4 °C is 0.9998395 grams per millilitre, slightly less than the rounded 1 that its table and most sources show. The converter uses the table’s own figures, so a litre of water at 4 °C comes out at exactly 1 kilogram. The difference is 0.016%.

Worked examples

A fish tank. A 20-gallon aquarium of water at 60 °F weighs 20 × 8.3376 = 166.75 pounds, before the glass, the stand, the gravel and the decorations.

A 55-gallon drum. Full of water at 60 °F: 55 × 8.3376 = 458.57 pounds, plus the weight of the drum.

A swimming pool. A pool holding 1,800 cubic feet of water, which is 13,464.9 US gallons, weighs 1,800 × 62.304 = 112,148 pounds at 70 °F. That is about 56 US tons.

The other way round. A container holding 100 pounds of water at 60 °F is 45.40 litres, or 11.99 US gallons.

Tips for working with water by weight

  • Use volume for filling and weight for loads. The weight of the water is what matters for a shelf, a roof, a trailer or a lifting strap.
  • Do not forget the container. The converter gives the water only.
  • Check the gallon. A UK gallon is 4.54609 litres and a US gallon is 3.785411784. The converter offers both.
  • Salt water is heavier. Sea water and brines are denser than fresh water, so this converter will understate their weight.
  • Ice is lighter per volume. It floats, so the converter is for liquid water only, from 32 to 212 °F.

Converting other units

For any other volume conversion, the volume converter covers litres, gallons, cups, pints and more. If you have cubic feet and want gallons, use the cubic feet to gallons converter. For a liquid other than water, where you know its density, the litres to tons converter will turn a volume into a weight, and the square feet to cubic feet converter will find the volume of a layer from its area and depth.

How it is calculated

The density comes from the USGS table of water at fifteen temperatures. The temperature you enter is converted to Fahrenheit and the density is interpolated in a straight line between the two nearest rows. Weight in kilograms is then the volume in litres times the density in kilograms per litre, and the other units follow from the exact definitions of the pound, the ounce and the gallons. The volume of a weight is the reverse. Everything is done in 40-digit decimal arithmetic and rounded only for display.

Frequently asked questions

How much does a gallon of water weigh?

A US gallon of water at 60 °F weighs 8.3376 pounds, or 3.7819 kg, which is the familiar 8.34 pounds. At 39.2 °F (4 °C), where water is densest, it is 8.3454 pounds.

How much does a litre of water weigh?

About 1 kilogram. At 4 °C a litre of water weighs 1 kg on the USGS table, and at 60 °F it is 0.99907 kg. So 1,000 litres weigh about a tonne.

How much does a cubic foot of water weigh?

About 62.4 pounds. At 39.2 °F it is 62.428 pounds, and at 70 °F it is 62.304 pounds. A cubic foot is 7.480519 US gallons.

Why does the weight change with temperature?

Because water expands a little as it warms, so a given volume holds less of it. A US gallon weighs 8.3454 pounds at 39.2 °F and 8.0003 pounds at boiling, 212 °F. The USGS table shows water at its densest at about 4 °C.

Is it 8.34 or 8.35 pounds per gallon?

Both appear. The rounded 8.34 corresponds to water at about 60 °F, and 8.35 to the very coldest, densest water. The difference is 0.1%, which does not matter for most purposes.

Does this work for salt water, or for other liquids?

No. Salt water and other liquids have different densities, and they would weigh more or less. This converter is for fresh liquid water, using the USGS figures. For another liquid, use the litres to tons converter with its density.

Related calculators

Sources