Skip to content
thecalculatorstudio

Square Feet to Cubic Feet Calculator (Area to Volume)

Square feet measure a surface and cubic feet measure a space, so you need a depth to convert. Enter the area and how deep it is.

Last reviewed

%

Cubic feet

50.000

area times depth, in the same units of length

Cubic feet
50.000
Cubic yards
1.852
Cubic metres
1.4158
US gallons
374.0

Area is flat, so it needs a depth to become a volume. Measure the depth you will actually fill, and add an allowance for waste and uneven ground.

You need a third number

Square feet and cubic feet are not two ways of measuring the same thing. A square foot is a flat surface, with a length and a width. A cubic foot is a space, with a length, a width and a height. To get from one to the other you have to say how tall the space is.

That third number is the depth, and with it the sum is simple:

Cubic feet = square feet × depth in feet

A floor of 200 square feet could hold a thin layer of gravel or a swimming pool. The area is the same. The volume is not.

Getting the depth into feet

The depth has to be in the same unit of length as the area, which for square feet means feet. Depths are often given in inches, so divide by 12.

Depth In feet
1 inch 0.0833
2 inches 0.1667
3 inches 0.25
4 inches 0.3333
6 inches 0.5
9 inches 0.75
12 inches 1

The calculator takes the depth in inches, feet, yards, centimetres, millimetres or metres, and does the conversion.

A worked example

You want to spread a layer of gravel over 200 square feet, 3 inches deep.

  • Depth in feet: 3 ÷ 12 = 0.25
  • Volume: 200 × 0.25 = 50 cubic feet

That is also 1.85 cubic yards, 374 US gallons, or 1.416 cubic metres, which the calculator shows alongside.

How the volume grows with depth

For an area of 100 square feet:

Depth Cubic feet
1 inch 8.33
2 inches 16.67
3 inches 25
4 inches 33.33
6 inches 50
8 inches 66.67
12 inches 100

The volume is proportional to the depth: double the depth and you double the volume. And the neat case is 12 inches, where the number of cubic feet is the same as the number of square feet.

Finding the area first

You often have to work out the square feet before you start.

  • A rectangle: length × width, both in feet. A bed 8 ft by 12 ft is 96 square feet.
  • A circle: π × radius². A round bed 10 feet across has a radius of 5 feet, so 3.14159 × 25 = 78.54 square feet.
  • A triangle: half the base times the height.
  • An odd shape: split it into rectangles and other simple shapes, work out each area, and add them. The area converter helps if your measurements are in different units.

If the depth is not the same everywhere, take an average, or split the area into sections of different depth and add the volumes.

What it is used for

Anything that fills a flat area to a depth:

  • Gravel, sand and crushed stone under paving or in a drive.
  • Soil, compost and mulch in a garden bed.
  • Concrete for a slab. For concrete you usually want cubic yards, which the square feet to cubic yards converter gives.
  • Insulation laid between joists, or screed over a floor.
  • Water in a shallow pool or a pond. For the weight, see the water weight converter.

Mixed units

The area and the depth can be in different units, and the calculator will convert both.

  • 1 square metre at 10 cm is 0.1 cubic metres, which is 3.531467 cubic feet.
  • 50 square yards at 6 inches is 8.33 cubic yards, which is 225 cubic feet.
  • An acre at 1 foot deep is 43,560 cubic feet, because an acre is exactly 43,560 square feet.

All these use the exact definitions of the foot, the yard and the inch, which NIST gives, so no rounding comes in until the answer is shown.

Allow for waste

The volume you calculate is the volume of a perfect layer. Ground is uneven, edges spill, and some material is lost in handling. The box for extra adds an allowance as a percentage of the volume. The right figure depends on the material and the job, so ask your supplier or contractor, and round up to the next quantity they sell.

Common mistakes

  • Using the depth in inches. Divide by 12 first, or let the calculator do it. 200 × 3 is 600, but the volume is 50 cubic feet.
  • Mixing units. Square feet with a depth in metres, without converting, gives nonsense.
  • Forgetting the depth varies. A slab that is thicker at the edges needs more than area times the thinnest part.
  • Confusing square feet with board feet or cubic feet per minute. Those are different units.

Cubic feet to gallons: the cubic feet to gallons converter. Any volume to any other: the volume converter. Lengths: the length converter.

How it is calculated

The area is converted to square metres and the depth to metres, using the exact definitions of each unit. They are multiplied to give cubic metres, which are converted to cubic feet, cubic yards, litres and gallons with exact factors. The waste allowance multiplies the volume by one plus the percentage. The arithmetic is in 40-digit decimals, and the answer is rounded only for display.

Frequently asked questions

How do I convert square feet to cubic feet?

Multiply the area in square feet by the depth in feet. 200 square feet at a depth of 3 inches, which is 0.25 feet, is 200 × 0.25 = 50 cubic feet.

Why can't I convert square feet to cubic feet directly?

Because they measure different things. A square foot is a flat area and a cubic foot is a three-dimensional space. A square foot of floor could be covered in a sheet of paper or a metre of water; the volume depends on the depth.

How do I convert inches of depth to feet?

Divide by 12. 3 inches is 0.25 feet, 4 inches is 0.3333 feet, 6 inches is 0.5 feet, and 9 inches is 0.75 feet. The calculator does this for you.

How many cubic feet are in a square foot?

It depends on the depth. At a depth of 1 foot, one square foot is exactly 1 cubic foot. At 1 inch it is 0.0833 cubic feet, and at 6 inches it is 0.5.

How much do I need for a layer of gravel or soil?

Area times depth gives the volume of the layer. 100 square feet at 4 inches is 33.33 cubic feet. Add an allowance for waste and uneven ground, and check how your supplier sells it.

Can I use metres?

Yes. Choose square metres for the area and centimetres, millimetres or metres for the depth. 1 square metre at 10 cm is 0.1 cubic metres, which is 3.531467 cubic feet.

Related calculators

Sources