Cubic Feet Calculator: Volume of a Box, Cylinder, Cone or Sphere
Pick a shape, choose your unit and enter the measurements. You get the volume in cubic feet, with the same volume in cubic yards, cubic metres, cubic inches, litres and US gallons.
Last reviewed
Volume in cubic feet
320.0000 ft³
- Cubic yards
- 11.8519
- Cubic metres
- 9.0614
- Cubic inches
- 552,960.0
- Litres
- 9,061.39
- US gallons
- 2,393.77
Volume is the space inside or filled, so measure the inside of a container and the full size of a pile. Give every length in the same unit.
What this calculator does
Choose a shape, a unit of length and the measurements, and it gives the volume in cubic feet, with the same volume in cubic yards, cubic metres, cubic inches, litres and US gallons. Four shapes are covered: a box, a cylinder (a pipe, a tank, a post hole), a cone (a pile of gravel or sand) and a sphere.
You can measure in feet, inches, yards, metres, centimetres or millimetres. Every length is converted to feet with the exact definitions of the inch, foot and yard, so a 12 inch cube comes out as exactly 1 cubic foot and a 3 foot cube as exactly 27.
Reading the result
A cubic foot is the space in a cube that is one foot long, one foot wide and one foot high. It is the unit used for storage space, refrigerator capacity, bags of soil and mulch, air flow, and the size of a pile or a hole.
The headline number is the volume of all the items you entered. If you enter a quantity, the page also shows the volume of one. The volume says how much space there is, not how much something weighs: a cubic foot of water and a cubic foot of feathers take up the same room.
The formulas
Every length must be in the same unit before you multiply. The calculator does that for you.
| Shape | Volume | What you enter |
|---|---|---|
| Box | length × width × height | three sides |
| Cylinder | π × (diameter ÷ 2)² × height | diameter and height |
| Cone | π × (diameter ÷ 2)² × height ÷ 3 | base diameter and height |
| Sphere | 4 ⁄ 3 × π × (diameter ÷ 2)³ | diameter |
A cone holds exactly one third of the cylinder with the same base and height. A sphere holds exactly two thirds of the cylinder that just contains it, which is a result Archimedes proved.
Worked examples
A box. 10 ft long, 8 ft wide, 4 ft high: 10 × 8 × 4 = 320 ft³. Divide by 27 for cubic yards: 320 ÷ 27 = 11.85 yd³. In metric, 320 × 0.028316846592 = 9.061 m³, which is 9,061 litres.
A tank, in gallons. A box-shaped tank inside measuring 4 ft by 3 ft by 2 ft is 24 ft³. A cubic foot holds 1,728 ÷ 231 = 7.4805 US gallons, so it holds 24 × 7.4805 = 179.5 gallons.
A cylinder. A post hole 1 ft wide and 3 ft deep has a radius of 0.5 ft: π × 0.5 × 0.5 × 3 = 2.356 ft³, which is 0.0873 yd³, or about 17.6 gallons of concrete.
A cone. A pile of gravel 6 ft across at the base and 3 ft high: π × 3 × 3 × 3 ÷ 3 = 28.27 ft³, which is 1.047 yd³.
A sphere. A ball 2 ft across: 4 ⁄ 3 × π × 1³ = 4.19 ft³, about 31.3 US gallons.
Reference: cubic feet in other units
| Cubic feet | Cubic yards | Cubic metres | Litres | US gallons |
|---|---|---|---|---|
| 1 | 0.03704 | 0.02832 | 28.317 | 7.4805 |
| 10 | 0.37037 | 0.28317 | 283.17 | 74.805 |
| 27 | 1 | 0.76455 | 764.55 | 201.97 |
| 50 | 1.85185 | 1.41584 | 1,415.8 | 374.03 |
| 100 | 3.7037 | 2.83168 | 2,831.7 | 748.05 |
One cubic foot is 1,728 cubic inches, because 12 × 12 × 12 = 1,728. One cubic metre is 35.3147 cubic feet.
Mistakes that change the answer
- Mixing units. A box 10 ft by 8 ft by 48 inches is not 10 × 8 × 48. Convert the 48 inches to 4 feet first, or let the calculator do it by choosing one unit for everything.
- Using the outside of a container. Walls take up space. If you want to know what a tank or a bin holds, measure inside.
- Using the radius where the diameter is asked for. The cylinder, cone and sphere here are entered by diameter, because that is what you can measure with a tape.
- Forgetting the depth. An area in square feet is not a volume. To fill a bed or a slab, multiply the area by the depth in feet. The page on square feet to cubic feet does that, with an allowance for waste.
Working backwards from a volume
Sometimes you know the volume you need and want the size. A tank that must hold 100 US gallons needs 100 × 231 ÷ 1,728 = 13.37 ft³, because a gallon is 231 cubic inches and a cubic foot is 1,728. A 1,000 litre tank is 1,000 ÷ 28.3168 = 35.31 ft³. A pipe 6 inches across (a 0.5 ft diameter) and 10 ft long holds π × 0.25 × 0.25 × 10 = 1.96 ft³, which is about 14.7 US gallons. Enter the pipe as a cylinder with a diameter of 0.5 ft and a height of 10 ft to check this.
Converting to other volume units
For cubic yards, divide by 27. For cubic metres, multiply by 0.028316846592. For litres, multiply by 28.316846592. For US gallons, multiply by 1,728 and divide by 231. The UK gallon is larger, at 4.54609 litres, so a cubic foot holds about 6.2288 of them. If you need a different pair of units, the volume converter covers every combination.
Frequently asked questions
How do I calculate cubic feet?
For a box, multiply length by width by height, with every side in feet. A box 10 ft long, 8 ft wide and 4 ft high holds 10 × 8 × 4 = 320 cubic feet. If your sides are in inches, divide each by 12 first, or work in cubic inches and divide the answer by 1,728.
How many cubic feet are in a cubic yard?
There are 27. A cubic yard is a cube 3 feet on each side, and 3 × 3 × 3 = 27. So 320 cubic feet is 320 ÷ 27 = 11.85 cubic yards, and a cubic yard of anything is 27 cubic feet of it.
How many gallons are in a cubic foot?
A cubic foot holds 7.4805 US gallons, because a cubic foot is 1,728 cubic inches and a US gallon is exactly 231 cubic inches (1,728 ÷ 231). It also holds 28.3168 litres. UK (imperial) gallons are larger, about 6.2288 to the cubic foot.
How do I convert square feet to cubic feet?
You need a third measurement, the depth. Multiply the area in square feet by the depth in feet. For 100 square feet at 4 inches deep, the depth is 4 ÷ 12 = 0.3333 ft, so the volume is 33.33 cubic feet. The square-feet-to-cubic-feet page does this with waste included.
Is the volume of a cylinder or cone just length times width times height?
No. A cylinder is π × radius² × height, and the radius is half the diameter, so a 1 ft wide, 3 ft deep post hole holds π × 0.5² × 3 = 2.356 cubic feet. A cone is one third of that: π × radius² × height ÷ 3. The calculator uses the diameter, which is what you can measure.
Should I measure inside or outside a container?
Measure the inside if you want to know how much it holds, because the walls take up space. Measure the outside for the space it occupies, such as shipping or storage. Wall thickness can make a real difference to the answer on a small container.
Related calculators
- Cubic Yards CalculatorEnter each section of the job as a rectangle or a circle, with its depth, and add an allowance for waste.
- Square Feet to Cubic Feet ConverterSquare feet measure a surface and cubic feet measure a space, so you need a depth to convert.
- Cubic Feet to Gallons ConverterEnter a volume in cubic feet and read it in gallons.
- Volume ConverterConvert any volume.
- Length ConverterConvert any length or distance.
- Square Footage CalculatorAdd each part of the room or plot as a shape, say whether it is added or taken away, and measure in feet, inches, yards, metres or centimetres.
- CBM CalculatorEnter each carton size and how many you are shipping, and add the actual weight if you know it.
- Moving Box EstimatorEnter how many books, kitchen items, clothes and other things you own, and how many of each fit in one of your boxes.