Cubic Yards Calculator for Concrete, Soil and Fill
Enter each section of the job as a rectangle or a circle, with its depth, and add an allowance for waste. You get the total cubic yards to order, section by section, with cubic feet and cubic metres.
Last reviewed
Cubic yards to order
8.15
7.407 before the 10% allowance
- Cubic feet
- 220.00
- Cubic metres
- 6.230
Measure the real depth you will fill, and keep an allowance for waste and uneven ground. Ask the supplier how they measure a delivery.
What this calculator does
A real job is rarely one neat rectangle. A patio has a footing along one edge, a garden has a round bed, and a driveway has a pad at the end. This calculator lets you enter each part as its own section, either a rectangle (length, width, depth) or a circle (diameter, depth), and adds them into one total in cubic yards.
Length and width share one unit, and the depth has its own, because slabs are usually measured in feet and their thickness in inches. You can also add an allowance for waste. The result shows the total to order and a table of what each section contributes.
Reading the result
The headline is the number of cubic yards to order, including your allowance. Below it is the same volume in cubic feet and cubic metres, and a section-by-section table so you can see which part of the job takes most of the material.
A cubic yard is the volume of a cube 3 feet on each side, which is 27 cubic feet. It is the unit that ready-mixed concrete, topsoil, mulch, gravel and fill are usually sold in. Suppliers who sell by weight will want tons instead; that needs a density, so use the gravel or asphalt calculator for those.
The formula
For a rectangle, with length and width in feet and depth in feet:
cubic yards = length × width × depth ÷ 27
For a circle:
cubic yards = π × (diameter ÷ 2)² × depth ÷ 27
When the area is in square feet and the depth in inches there is a shortcut: area × depth ÷ 324. It works because one inch of depth is 1/12 of a foot, and 27 × 12 = 324. Extension services publish the same rule for soil and mulch.
Worked examples
A slab. 20 ft by 20 ft and 6 inches thick: 20 × 20 × 0.5 = 200 ft³, and 200 ÷ 27 = 7.41 yd³. With a 10% allowance, order 7.407 × 1.1 = 8.15 yd³.
A job in three sections.
| Section | Size | Cubic feet |
|---|---|---|
| Patio | 12 ft × 10 ft × 4 in | 40.00 |
| Footing along one edge | 4 ft × 10 ft × 12 in | 40.00 |
| Round pad | 3 ft across × 6 in | 3.53 |
| Total | 83.53 |
83.53 ÷ 27 = 3.09 yd³, and with 10% extra, 3.40 yd³.
A round column. 1 ft across and 8 ft tall: π × 0.5 × 0.5 × 8 = 6.28 ft³, which is 0.23 yd³. A column is a circle with a height instead of a depth, so enter the height as the depth.
Reference: how far one cubic yard goes
One cubic yard covers this many square feet at each depth:
| Depth | Square feet covered |
|---|---|
| 1 inch | 324 |
| 2 inches | 162 |
| 3 inches | 108 |
| 4 inches | 81 |
| 6 inches | 54 |
| 8 inches | 40.5 |
| 12 inches | 27 |
And the cubic yards for some common slab sizes at 4 inches thick:
| Slab | Cubic yards |
|---|---|
| 10 ft × 10 ft | 1.23 |
| 12 ft × 12 ft | 1.78 |
| 20 ft × 20 ft | 4.94 |
| 24 ft × 24 ft | 7.11 |
| 30 ft × 30 ft | 11.11 |
Doubling the thickness doubles the volume, so the same slabs at 8 inches take twice as much.
In metric units
Because the calculator converts every length exactly, you can work in metres and still get cubic yards. One cubic metre is 1.30795 cubic yards, and one cubic yard is 0.76455 cubic metres. A slab 6 m by 4 m and 10 cm thick has a volume of 6 × 4 × 0.1 = 2.4 m³, which is 3.14 yd³. Choose metres for the length and width, centimetres for the depth, and enter 6, 4 and 10.
If a supplier quotes a price per cubic yard and you prefer a price per cubic foot, divide by 27. A cubic foot is 1/27 of a yard, or 0.037 yd³.
Things that change the number
- Depth is the biggest lever. A slab measured at 4 inches that is poured at 5 inches needs a quarter more material. Measure the finished thickness, not the form’s nominal size.
- Uneven ground. A base that dips in the middle takes more than the flat estimate. That is what the allowance is for.
- Compaction. Loose soil, mulch and gravel settle when they are spread and walked on, so the delivered volume can shrink. Ask the supplier whether their cubic yard is loose or compacted.
- Units. Check both unit menus before you read the answer. A depth entered as 6 with the unit set to feet is 6 feet, not 6 inches.
When to use another page
If you only have one area and one depth, the square feet to cubic yards page is quicker. For a single box, cylinder, cone or sphere in any unit, use the cubic feet calculator. For weight rather than volume, use the gravel or asphalt calculator.
Frequently asked questions
How do I calculate cubic yards?
Multiply length by width by depth in feet, then divide by 27. A slab 20 ft by 20 ft and 6 inches (0.5 ft) thick is 20 × 20 × 0.5 = 200 cubic feet, and 200 ÷ 27 = 7.41 cubic yards. If the area is in square feet and the depth in inches, multiply them and divide by 324.
Why divide by 324?
A cubic yard is 27 cubic feet. Covering an area to a depth of one inch uses 1/12 of a cubic foot for each square foot, so one cubic yard covers 27 × 12 = 324 square feet at one inch deep. Extension services publish the same rule: area times depth in inches, divided by 324.
How much extra should I add for waste?
The calculator takes the allowance as a percentage, starting at 10%, because ground is rarely perfectly level and some material is spilled or left in the mixer or truck. Your supplier or contractor knows the right figure for the material and the job, so ask them. Order too little and you may pay for a second delivery.
How do I measure a round area or a column?
Choose the circle shape and enter the diameter and the depth or height. The volume is π × (diameter ÷ 2)² × depth. A round pad 4 ft across and 6 inches deep holds π × 2 × 2 × 0.5 = 6.28 cubic feet, which is 0.23 cubic yards.
Can I mix units, like feet for the slab and inches for the thickness?
Yes. The length and width share one unit and the depth has its own, because slabs are usually measured in feet and their thickness in inches. Each is converted exactly before the volumes are added, so you never need to turn 6 inches into 0.5 feet yourself.
Does the answer change with the material?
The volume does not: a cubic yard is 27 cubic feet of anything. The weight does, and so does how much a loose material settles once it is compacted. If a supplier sells by weight, use the gravel or asphalt calculator, which asks for a density.
Related calculators
- Square Feet to Cubic Yards CalculatorEnter the area and the depth of the layer.
- Cubic Feet CalculatorPick a shape, choose your unit and enter the measurements.
- Square Feet to Cubic Feet ConverterSquare feet measure a surface and cubic feet measure a space, so you need a depth to convert.
- Mulch CalculatorAdd each bed as a rectangle or a circle, set the depth and the size of the bags you buy.
- Gravel CalculatorAdd each area as a rectangle or a circle, set the depth, and enter the density your supplier quotes.
- Square Footage CalculatorAdd each part of the room or plot as a shape, say whether it is added or taken away, and measure in feet, inches, yards, metres or centimetres.
- Volume ConverterConvert any volume.
- Moving Box EstimatorEnter how many books, kitchen items, clothes and other things you own, and how many of each fit in one of your boxes.