Wallpaper Calculator: How Many Rolls Do You Need?
Enter the width of wall to cover, its height and your roll's size and pattern repeat. You get the number of drops, the drops per roll and the rolls to buy, with spares.
Last reviewed
Rolls to buy
7
6 needed plus 1 spare
- Drops needed
- 23
- Length of each drop
- 2.5 m
- Drops from one roll
- 4
- Wall area
- 28.8 m²
- Paper bought
- 37.1 m²
Roll sizes differ between makers and countries, so read the width and length on your roll's label. Reduce the width to cover for any spot that needs no paper, such as a doorway. Buy all the rolls from the same batch, since pattern and colour can vary slightly between batches.
How the drop method works
Wallpaper comes in rolls of a fixed width and length, and it goes up in full-height strips called drops. Counting by area is not good enough, because only whole drops can be cut from a roll and a pattern wastes paper. The drop method counts strips instead:
- Drop length = wall height + trimming allowance, and, if the paper has a pattern, rounded up to a whole number of pattern repeats. Rounding up makes every strip start at the same point of the pattern, so the strips match when they meet.
- Drops per roll = roll length ÷ drop length, rounded down. The leftover end of a roll is too short for another strip.
- Drops needed = width of wall to cover ÷ roll width, rounded up. A part-width still needs a whole strip.
- Rolls needed = drops needed ÷ drops per roll, rounded up.
- Rolls to buy = rolls needed + spare rolls.
Farrow & Ball’s guide follows the same logic. Its rolls are 10 m long and 53 cm wide, and it estimates three drops per roll in a standard 2.4 m high room for small repeats, four for stripes, and two for large pattern repeats. It also advises adding one more roll to allow for trimming or mistakes, because pattern and colour can vary slightly between batches.
Worked examples
All use a room with 12 m of wall to cover, 2.4 m high, a 10 cm trimming allowance, and a roll 53 cm wide and 10 m long, as in the guide above.
A paper with a 62.3 cm repeat. The drop is 2.4 + 0.10 = 2.5 m, rounded up to whole repeats of 0.623 m: 5 repeats, 3.115 m. One roll gives ⌊10 ÷ 3.115⌋ = 3 drops. The wall needs ⌈12 ÷ 0.53⌉ = 23 drops, so ⌈23 ÷ 3⌉ = 8 rolls, and with a spare 9 rolls.
A plain paper. The drop is 2.5 m, so a roll gives 4 drops. The 23 drops need ⌈23 ÷ 4⌉ = 6 rolls, and with a spare 7.
The same room in feet and inches. 40 ft of wall, 8 ft high, a roll 21 in wide and 33 ft long, a 4 in allowance and no pattern. The drop is 8 ft 4 in, or 8.333 ft, so a roll gives 3 drops. The wall needs ⌈40 ÷ 1.75⌉ = 23 drops, so 8 rolls and a spare, 9 rolls.
These examples show how much the pattern costs: the matched paper needs two more rolls than the plain one.
Getting a better answer
- Use your own roll size. The width and length differ between makers and countries.
- Take the repeat from the paper. The maker lists it on the sample or the website.
- Reduce the width for gaps. Subtract any spot that needs no paper, such as a doorway, from the width of wall to cover.
- Allow for trimming. The allowance covers the extra at the top and bottom of each drop.
- Buy together. Pattern and colour can vary between batches, so buy every roll at once.
Common mistakes
- Working by area. Square metres hide the waste at the end of each roll and in the pattern.
- Forgetting the repeat. It can add a whole roll or more.
- Rounding the drops per roll up. Only whole drops fit.
- Mixing up the units. Roll widths are usually in centimetres or inches, and lengths in metres or feet.
- Leaving out the spare. Mistakes happen.
To work out paint for the same walls, use the paint calculator. The square footage calculator gives the floor area, and the flooring calculator the flooring to buy.
How it is calculated
Everything is exact decimal arithmetic, so a drop that fits a roll exactly is not rounded away. Areas are shown to two decimals in square metres and one in square feet.
Frequently asked questions
How do I calculate how much wallpaper I need?
Work out how many drops, full-height strips, cover the wall by dividing its width by the roll width and rounding up. Work out how many drops one roll gives, and divide. Round up, then add a spare roll.
What is a drop?
A drop is one strip of wallpaper from ceiling to skirting. Its length is the wall height plus a trimming allowance, rounded up to a whole pattern repeat so every strip starts at the same point in the pattern.
What is a pattern repeat and why does it matter?
The repeat is the distance after which the pattern starts again. Each strip must start at the same point, so the drop length is rounded up to a whole number of repeats. A big repeat wastes more paper and gives fewer drops from a roll.
Why does it say to buy a spare roll?
Farrow & Ball recommends adding one more roll to allow for trimming or mistakes, as pattern and colour can vary slightly between batches. A spare from the same batch is better than a later order.
What roll size should I enter?
Read the width and length on the label of your roll. Farrow & Ball rolls are 10 metres long and 53 centimetres wide, but sizes differ between makers and between countries, so use the real size.
Why does a longer roll not always mean fewer rolls?
Only whole drops count. A 10 metre roll gives three drops of 3.115 metres and leaves 0.655 metres, which cannot make another strip. The drop length decides the answer.
Related calculators
- Paint CalculatorEnter each room's length, width and ceiling height with its doors and windows, choose the coats and the coverage printed on the can.
- Square Footage CalculatorAdd each part of the room or plot as a shape, say whether it is added or taken away, and measure in feet, inches, yards, metres or centimetres.
- Flooring CalculatorEnter the length and width of each room, choose the layout, and say how much one box covers.
- Tile CalculatorEnter the size of each area, the size of the tile and the grout joint, and how much waste to allow.
- Area ConverterConvert any area.
- Length ConverterConvert any length or distance.