Skip to content
thecalculatorstudio

Paint Calculator: How Much Paint Do I Need for a Room?

Enter each room's length, width and ceiling height with its doors and windows, choose the coats and the coverage printed on the can. You get the area to paint and the paint to buy, rounded up to the quart.

Last reviewed

Room 1
ft
ft
ft
ft²
ft²
sq ft
%

Paint to buy

2 gallons + 2 quarts

2.30 gallons needed (8.7 litres)

Area to paint
366 sq ft
Area (metric)
34.0 m²
Walls before openings
416 sq ft
Doors and windows
−50 sq ft
Over 2 coats
732 sq ft
Gallons, no extra
2.09

Coverage depends on the paint, the surface and the colour change. Sherwin-Williams says a gallon typically covers about 350 to 400 sq ft, so check your can. Quantities are rounded up to the quart.

What this calculator does

Enter each room’s length, width and ceiling height, how many doors and windows it has, and how many coats you plan. The calculator works out the area to paint and the paint to buy, in gallons and quarts, with litres alongside. You can add several rooms and include the ceilings.

The coverage of a gallon is an input, because it depends on the paint on your can. It starts at 350 square feet, the low end of the range Sherwin-Williams gives for a gallon of paint. The page does the arithmetic and shows its working, so you can see where the number comes from.

Reading the result

The headline is the paint to buy, rounded up to the next quart and shown as gallons plus quarts. Beneath it, the exact gallons and the litres. The grid shows:

  • Area to paint: the walls less the doors and windows, plus the ceilings if you chose them, for one coat.
  • Walls before openings and doors and windows: how the area was reached.
  • Over the coats: the area multiplied by the number of coats.
  • Gallons, no extra: the amount before the optional margin for touch-ups.

The formulas

wall area = (length + width) × 2 × height

area to paint = walls − doors − windows (+ ceiling = length × width)

gallons = area to paint × coats ÷ coverage per gallon × (1 + extra ÷ 100)

Sherwin-Williams says a gallon of paint typically covers about 350 to 400 square feet, a quart of paint covers 100 square feet, and a gallon of primer covers about 200 to 300 square feet. Coverage varies with the texture of the wall, how porous it is and the colour you are covering, so use the number on the can. The calculator rounds up to the quart, treating a quart as a quarter of a gallon.

Worked examples

One coat. A room 12 ft long, 14 ft wide and 8 ft high. The perimeter is 2 × (12 + 14) = 52 ft and the walls are 52 × 8 = 416 sq ft. A door of 20 sq ft and two windows of 15 sq ft take off 50, leaving 366 sq ft. At 350 sq ft per gallon that is 1.0457 gallons, which is 4.18 quarts, so buy 1 gallon and 1 quart.

Two coats with a margin. Twice the area is 732 sq ft, which is 2.0914 gallons. Add 10% for touch-ups and it is 2.3006 gallons, or 8.7 litres. That is 9.2 quarts, so buy 2 gallons and 2 quarts.

With the ceiling. The ceiling is 12 × 14 = 168 sq ft, so the one-coat area becomes 534 sq ft, which is 1.5257 gallons, or 1 gallon and 3 quarts.

Metric. A room 4 m by 5 m with a 2.5 m ceiling has walls of 2 × 9 × 2.5 = 45 m². A door of 1.8 m² leaves 43.2 m². Two coats cover 86.4 m², which is 930 sq ft, so 2.657 gallons or 10.06 litres.

Reference: gallons by room size

Walls only, 8 ft ceiling, no doors or windows taken off, at 350 sq ft per gallon:

Room Wall area (sq ft) Gallons, one coat Gallons, two coats
10 ft × 10 ft 320 0.91 1.83
12 ft × 12 ft 384 1.10 2.19
12 ft × 14 ft 416 1.19 2.38
14 ft × 16 ft 480 1.37 2.74
16 ft × 20 ft 576 1.65 3.29

And how much the coverage on the can matters, for 732 sq ft of paint (the two-coat example):

Coverage per gallon Gallons
300 sq ft 2.44
350 sq ft 2.09
400 sq ft 1.83

A whole floor of rooms

Enter each room on its own row. Take a bedroom of 12 ft × 14 ft × 8 ft with one door and two windows (366 sq ft), a second room of 10 ft × 12 ft × 8 ft with one door and one window (352 less 35 is 317 sq ft), and a small room of 8 ft × 10 ft × 8 ft with one door and one window (288 less 35 is 253 sq ft). The total is 936 sq ft. Two coats cover 1,872 sq ft, which is 5.35 gallons at 350 sq ft per gallon, and with 10% for touch-ups 5.88 gallons, or 23.5 quarts, so buy 24 quarts, which is 6 gallons. In litres, 5.88 gallons is 22.3 L.

Doors and windows

The page does not decide how big your doors and windows are. It asks for the area of one door and one window, and starts at 20 and 15 square feet, which are simply 3 ft × 6 ft 8 in and 3 ft × 5 ft. Measure yours, or enter zero if you would rather not deduct them. If you choose a metric unit, the areas are in square metres, centimetres or whichever unit you picked, squared.

Getting the quantity right

  • Check the can. Coverage is printed on it. Use that figure, not a general one.
  • Plan the coats. Dark or bold colour changes may need more coats, and primer has its own coverage.
  • Allow for touch-ups. A small margin keeps a spare for later, from the same batch.
  • Measure the rooms you will paint. Skip walls you will leave, and add ceilings, trim and closets as separate rooms if you want them in.

Frequently asked questions

How do I calculate how much paint I need?

Find the area to paint, divide it by what a gallon covers, and multiply by the number of coats. Walls are the perimeter times the height, less doors and windows. A 12 ft by 14 ft room with 8 ft walls has 416 sq ft of wall; with one door (20 sq ft) and two windows (15 sq ft each) that is 366 sq ft, which is 1.05 gallons for one coat at 350 sq ft per gallon.

How much does a gallon of paint cover?

Sherwin-Williams says a gallon typically covers about 350 to 400 square feet, a quart about 100 square feet, and a gallon of primer about 200 to 300. The calculator starts at 350, the low end of the paint range, and you can change it to the figure on your can.

Do I need to subtract doors and windows?

Usually yes, because you do not paint them the same way. Enter the number of each in the room, and the area of one door and one window, which start at 20 sq ft and 15 sq ft (a 3 ft by 6 ft 8 in door and a 3 ft by 5 ft window). Change the areas to match your own.

How many coats should I plan for?

The calculator starts at two, and you can choose from one to six. The number you need depends on the paint, the surface and any colour change, and the can's instructions say how many it recommends. Paint quantity is directly proportional to the number of coats.

Why does it round up to the quart?

Paint is sold in whole quarts and gallons, and a quart is a quarter of a gallon. The calculator rounds your need up to the next quart and shows it as gallons plus quarts. For 2.30 gallons that is 2 gallons and 2 quarts. If a quart is only slightly more than you need, a spare tin is useful for touch-ups.

Can I use metres and litres?

You can enter the rooms in metres, centimetres, inches or yards, and the door and window areas follow the same unit. The result is also shown in litres, using 3.785411784 litres to the US gallon. Coverage is entered in square feet per US gallon, as printed on US cans.

Related calculators

Sources