Skip to content
thecalculatorstudio

Flooring Calculator: How Much Flooring Do I Need?

Enter the length and width of each room, choose the layout, and say how much one box covers. You get the area to buy with waste, the number of boxes, and what is left over.

Last reviewed

Room 1
ft
ft
%

Boxes to buy

9

176.4 sq ft of flooring with 5% waste

Room area
168.0 sq ft
Room area (metric)
15.61 m²
Area to buy
176.4 sq ft
Boxes for the area
9
Spare cartons
0
Left over after laying
12.0 sq ft

The percentages are a flooring manufacturer's guidance for wood: about 5% for a straight lay, more for lower grades, and 10 to 15% on a diagonal. Check your product's own advice.

What this calculator does

Flooring is sold by the box, but a room is measured in feet or metres. This calculator turns your room sizes into the area to buy, with an allowance for cutting waste, and then into boxes, with optional spare cartons for repairs later.

Add each room as a length and a width, choose the layout and grade, and enter how much one box covers (it is printed on the carton). You can measure in feet, inches, yards, metres or centimetres, and enter the box coverage in square feet or square metres, so a European floor in square metres works as well as a US one.

Reading the result

The headline is the number of boxes to buy, including any spare cartons you asked for. Beneath it:

  • Room area is the plain floor area, in square feet and square metres.
  • Area to buy is the room area plus the waste allowance.
  • Boxes for the area is that area divided by the coverage of a box, rounded up.
  • Spare cartons are the extra boxes you chose to keep.
  • Left over after laying is the flooring in the boxes you bought that the room itself will not use.

If you set the box coverage to zero, the page shows just the area to buy.

The waste allowances

Cutting along walls, around doorways and at the ends of rows leaves offcuts, and some boards are set aside for defects. The allowances here come from a guide by Mullican Flooring, published by Lowe’s:

Layout and grade Allowance
Straight lay, standard grade add 5% (the guide gives 5 to 7%)
Straight lay, character or builder grade towards 7% or more, because more boards show variation
Diagonal lay add 10 to 15%, because the cuts are larger

The guide also recommends buying one or two additional cartons to keep for repairs, for example after water damage.

The percentages are for hardwood. If your product’s installation guide says something different, follow that, and you can type any figure into the waste box.

The formula

area to buy = room area × (1 + waste ÷ 100)

boxes = area to buy ÷ coverage of one box, rounded up

Rooms are added before the allowance is applied, as the guide describes, so several rooms are treated as one job.

Worked examples

A bedroom. 12 ft by 14 ft is 168 sq ft. With 5% waste you need 168 × 1.05 = 176.4 sq ft. At 20 sq ft a box that is 8.82 boxes, so 9 boxes, which hold 180 sq ft and leave 12 sq ft over.

The effect of the layout. The same room at 7% needs 179.76 sq ft, which is still 9 boxes. At 10% it needs 184.8 sq ft, which is 9.24 boxes, so 10. At 15% it needs 193.2 sq ft, which is 9.66 boxes, so 10.

With spares. Add two spare cartons to the 5% job and the order becomes 11 boxes, or 220 sq ft.

Two rooms. 12 ft by 14 ft plus 6 ft by 8 ft is 216 sq ft. With no waste and 20 sq ft boxes that is 10.8, so 11 boxes.

Metric. A room 4 m by 5 m is 20 m². With 10% waste you need exactly 22 m², and a box of 2.2 m² means exactly 10 boxes. The calculator works in exact decimals, so a result that comes out whole is not rounded up to 11.

Reference: area and boxes by room size

At 20 sq ft per box:

Room (sq ft) Straight lay, 5%: area / boxes Diagonal, 15%: area / boxes
100 105 / 6 115 / 6
150 157.5 / 8 172.5 / 9
200 210 / 11 230 / 12
300 315 / 16 345 / 18

Measuring an L-shaped room

A room that is not a simple rectangle is measured in pieces. Suppose the main part is 16 ft by 12 ft and an alcove adds a 6 ft by 8 ft rectangle. Enter them as two rooms: 16 × 12 = 192 sq ft and 6 × 8 = 48 sq ft, a total of 240 sq ft. The waste allowance is then applied to the total, not to each piece, which is how the manufacturer’s guide describes it.

Square feet and square metres

One square foot is exactly 0.09290304 square metres, so the 168 sq ft bedroom is 15.61 m², and a 20 sq ft box is 1.858 m². In the other direction, a box that covers 2.2 m² covers 2.2 ÷ 0.09290304 = 23.68 sq ft. You can enter the room in one system and the box in the other, and the calculator converts exactly.

Tips for ordering

  • Measure to the walls. Measure each room at its widest and longest points, and split an L-shaped room into rectangles.
  • Use the carton’s coverage. Boxes of the same product may be sold in different sizes, so enter the one you are buying.
  • Order everything together. Boards from the same batch match. Keeping a spare carton or two means a repair later uses the same material.
  • Allow for your layout. This calculator cannot see how the rows fall in your room, so if the boards will need unusual cuts, raise the waste figure.
  • Check the grade. If you choose a grade that allows more character, set the waste towards the top of the range.

Frequently asked questions

How do I calculate how much flooring I need?

Multiply each room's length by its width to get the square footage, add the rooms together, then add a waste allowance. A 12 ft by 14 ft room is 168 sq ft, and with 5% waste you need 176.4 sq ft. Divide by the square feet in a box and round up: at 20 sq ft a box, that is 9 boxes.

How much waste should I allow?

Mullican Flooring recommends adding 5% (its guide says 5 to 7%) to the total footage, so the installer can set aside boards with defects or unwanted character. Character and builder grades need more because more of the board shows variation. A diagonal lay needs 10 to 15% because the cuts are larger. The presets here use those figures.

Should I buy extra cartons?

Mullican recommends keeping one or two additional cartons for repairs, for example after a water leak, because a later purchase may not match. There is a box for spare cartons; they are counted separately from the waste so you can see both.

Is the waste allowance the same for laminate, vinyl and tile?

Not necessarily. The percentages here come from a hardwood flooring guide, and other products and layouts can differ. Check the installation guide for your product. For tile, use the tile calculator, which also accounts for the grout joint.

What if my box covers a different amount?

Enter what the carton says, in square feet or square metres. Coverage differs between products and brands, and the number of boxes depends on it. If you set it to zero, the calculator gives only the area to buy.

Do I include closets and alcoves?

Yes, if the flooring runs into them. Add each as its own room, measured to the walls, and the calculator adds the areas. Leave out fixed cabinets or islands that the flooring will not go under.

Related calculators

Sources