Skip to content
thecalculatorstudio

Tile Calculator: How Many Tiles and Boxes Do I Need?

Enter the size of each area, the size of the tile and the grout joint, and how much waste to allow. You get the tiles to buy, the boxes if you know how many tiles are in one, and how many are spare.

Last reviewed

Area 1
ft
ft
in
in
in
%

Tiles to buy

130

118 for the area, 12 spare (10% waste)

Area
120.0 sq ft
Area (metric)
11.15 m²
Tile area bought
130.0 sq ft
One tile covers
1.021 sq ft

This counts tiles by area, with the grout joint and your waste allowance. A diagonal or patterned layout, or a room with many corners, wastes more, so raise the waste figure for those.

What this calculator does

You give it the size of each floor or wall area, the size of the tile, the width of the grout joint and how much waste to allow. It tells you how many tiles to buy and, if you enter how many tiles come in a box, how many boxes. You can add several areas, such as a bathroom floor and a shower wall, and enter the tile in inches, centimetres or millimetres.

It counts tiles by area. It does not draw your layout, so it works best as a reliable starting figure that you adjust for the pattern, the room’s corners and how you plan to cut.

Reading the result

The headline is the number of tiles to buy. Underneath it the page shows the count with no waste, the spare tiles that the waste allowance adds, the area in square feet and square metres, and the area one tile covers, joint included.

If you enter a box size, it shows the boxes to buy and the tiles left in the last box. Those leftovers are a useful spare stock, since they come from the same batch as the rest.

The formula

A tile sits in a grid with a grout joint around it, so each one covers its own width plus a joint, times its own length plus a joint:

area per tile = (tile width + joint) × (tile length + joint)

tiles = area ÷ area per tile, plus waste, rounded up

Waste is added as a percentage, so 10% waste means multiplying by 1.10 before rounding up. The number of boxes is the tiles divided by the tiles per box, rounded up. The arithmetic is done in exact decimals, so a count that is exactly a whole number, such as 378, is never rounded up to 379 by a stray digit.

Daltile’s guidance is to buy approximately 10% more tile than you expect to need. That is the starting waste figure here. For layouts that need many angled cuts, or a room with many corners, use a higher figure.

Worked examples

A floor with 12 inch tiles. 10 ft by 12 ft is 120 sq ft. With a 1/8 inch joint, one tile covers 12.125 × 12.125 = 147.016 sq in, which is 1.0209 sq ft. 120 ÷ 1.0209 = 117.54, so 118 tiles with no waste, and with 10% waste 129.29, so 130 tiles. Without a joint it would be 120 tiles, or 132 with waste.

Boxes. 130 tiles at 8 tiles per box is 16.25 boxes, so buy 17 boxes, which leaves 6 tiles spare.

Metric. A floor 3 m by 4 m is 12 m². A 60 cm by 30 cm tile with a 3 mm joint covers 60.3 × 30.3 = 1,827.09 cm². 120,000 ÷ 1,827.09 = 65.68, so 66 tiles, and with 10% waste 72.25, so 73 tiles.

Two areas. A 10 ft by 12 ft floor and a 4 ft by 5 ft alcove make 140 sq ft. With 18 inch tiles and a 1/4 inch joint, a tile covers 18.25 × 18.25 ÷ 144 = 2.313 sq ft, so 60.53 tiles, which is 61. With 15% waste it is 69.6, so 70 tiles.

A bathroom. 8 ft by 10 ft is 80 sq ft. With 6 inch tiles and a 1/16 inch joint, a tile covers 6.0625 × 6.0625 ÷ 144 = 0.2552 sq ft, giving 313.4, or 314 tiles, and 345 with 10% waste.

Reference: tiles per 100 square feet

With no grout joint, and then with 10% waste:

Tile size Tiles per 100 sq ft With 10% waste
4 in × 4 in 900 990
6 in × 6 in 400 440
8 in × 8 in 225 248
12 in × 12 in 100 110
12 in × 24 in 50 55
18 in × 18 in 44.4 → 45 49
24 in × 24 in 25 28

A grout joint lowers each figure a little. The effect is larger for small tiles, because there are more joints.

Getting it right

  • Measure each area separately. Split an L-shaped room into rectangles and add each as an area.
  • Use the real tile size. The size on the carton is often a nominal size, so check the actual dimensions and enter those.
  • Match the joint to the plan. A grout joint is set by the tile, the spacers and the installer. Use the width you intend to use.
  • Adjust the waste for the layout. The 10% starting figure is Daltile’s general guidance. Patterns with many angled cuts and rooms with many corners need more, and the right figure depends on your layout.
  • Keep spare tiles. Boxes from the same batch match each other. A tile bought years later may not.
  • Buy it all together. Daltile notes that the dye lot and printing process can change slightly over the years, so one purchase for the whole job is the safest.

Frequently asked questions

How do I calculate how many tiles I need?

Divide the area to tile by the area one tile covers, including its share of the grout joint, then add your waste allowance and round up. For 120 sq ft of 12 in tiles with a 1/8 in joint, one tile covers 12.125 × 12.125 in, which is 1.0209 sq ft, so 120 ÷ 1.0209 = 117.5, which is 118 tiles before waste.

How much extra tile should I buy?

Daltile recommends buying approximately 10% more tile than you expect to need, so the calculator starts there. That covers cuts and breakage and leaves a few spares from the same batch for later repairs. Patterns that need many angled cuts, and small rooms with many corners, need more, so raise the figure for them.

Does the grout joint make a difference?

A little. Each tile takes up its own size plus one joint on each side, so the tiles are spread over slightly more area. For 120 sq ft of 12 in tile it is the difference between 120 tiles with no joint and 118 with a 1/8 inch joint. Wider joints and smaller tiles make a bigger difference.

How many boxes of tile do I need?

Enter the number of tiles in a box, which is printed on the carton, and the calculator divides and rounds up. With 130 tiles and 8 tiles to a box that is 16.25 boxes, so 17, which leaves 6 tiles in the last box as spares.

Can I enter the tile size in centimetres or millimetres?

Yes. Choose centimetres, millimetres or inches for the tile and the joint, and feet, metres or yards for the floor. A 60 × 30 cm tile with a 3 mm joint on a 3 m by 4 m floor needs 66 tiles, or 73 with 10% waste.

Why buy all the tile at once?

Daltile advises keeping a small amount of extra tile as "attic stock" so you can replace a broken one later from the same dye lot and printing process, which can change slightly over the years. Buying everything in one go also keeps colours consistent across the room.

Related calculators

Sources