Price Per Square Foot Calculator
Enter a price and a floor area to get the rate per square foot, then add the other places you are looking at and compare them properly.
Last reviewed
Price per square foot
$250.00
1,800 sq ft at $250.00
- Per square foot
- $250.00
- Per square metre
- $2,690.98
- Per square yard
- $2,250.00
- Total area
- 1,800 sq ft
Price per square foot compares size against cost and nothing else. Location, condition, layout and land are not in it.
The calculation, and why it is the easy part
Price per square foot = price ÷ floor area
$450,000 ÷ 1,800 sq ft = $250 per square foot
Stated other ways, the same property is $2,690.98 per square metre and $2,250 per square yard. A square metre is 10.7639 square feet; a square yard is exactly 9.
The division is trivial. Everything that makes this number useful or misleading happens before and after it.
Comparing properties properly
This is what the measure is for. Four houses in the same area:
| Price | Area | Per sq ft | Against the first |
|---|---|---|---|
| $450,000 | 1,800 sq ft | $250.00 | n/a |
| $520,000 | 2,200 sq ft | $236.36 | −5.46% |
| $389,000 | 1,500 sq ft | $259.33 | +3.73% |
| $610,000 | 2,800 sq ft | $217.86 | −12.86% |
The $610,000 house is the most expensive and the best value per square foot. The $389,000 house is the cheapest and the worst. That inversion is the whole point of the measure, and the first warning about using it alone.
At the cheapest rate of $217.86, the first property’s 1,800 sq ft would cost $392,148 rather than $450,000. Whether that gap is a bad deal or a better street is not something this number can tell you.
Bigger houses are cheaper per square foot
The pattern above is not a coincidence. Price per square foot nearly always falls as homes get larger, because the expensive parts do not scale with floor area:
- One kitchen, however big the house
- Bathrooms, heating, plumbing and electrics
- The land, the roof, the foundation
- Fixed costs of building and transacting at all
Add 400 square feet of bedroom and you are adding some of the cheapest space in the building. So comparing a 1,500 sq ft house against a 2,800 sq ft one on this measure is structurally unfair to the smaller one.
Compare like with like. Properties within a few hundred square feet of each other, in the same area, in similar condition.
Which square feet are being counted?
This is where the number quietly breaks.
The US standard is ANSI Z765: finished, heated living space, measured to the outside of the exterior walls. Generally not counted:
- Garages, attached or otherwise
- Unfinished basements and attics
- Open porches, decks and balconies
- Areas with low ceilings
But listings are not audited, practice varies by region, and a finished basement may or may not appear depending on local convention. The same house can be advertised at meaningfully different square footages, and a 10% difference in stated area is a 10% difference in price per square foot without a brick moving.
Before trusting a comparison, check that both figures came from the same kind of measurement. If one listing includes a finished basement and the other does not, you are not comparing anything.
What the number cannot see
Price per square foot compares size against cost. It is blind to:
- Location: the single biggest driver of property value
- Condition: a renovated kitchen and a 1970s one measure identically
- Layout: 1,800 usable square feet beats 2,000 awkward ones
- Land: a large plot adds nothing to the floor area
- Age, build quality, light, noise, outlook
A house that looks cheap per square foot is often cheap for a reason the measure cannot express. Use it to decide what to go and see, not what to buy.
Commercial rent works differently
In commercial property the same measure is used for rent, and almost always quoted as an annual figure per square foot. “$28 a square foot” on a 2,500 sq ft office means:
2,500 × $28 = $70,000 a year, or $5,833.33 a month
| Space | Rate | Per year | Per month |
|---|---|---|---|
| 1,200 sq ft | $32 | $38,400 | $3,200 |
| 2,500 sq ft | $28 | $70,000 | $5,833 |
| 5,000 sq ft | $24 | $120,000 | $10,000 |
Two things catch people out. The rate is annual, so dividing by twelve is a necessary step rather than an optional one. And commercial leases often charge on rentable square feet, which include a share of lobbies, corridors and shared facilities, typically 10% to 20% more than the space you can actually use. Ask for the usable figure as well as the rentable one before comparing two offices.
Where it genuinely earns its keep
Three jobs it does well:
- Screening a long list. Twenty listings become a ranked shortlist in a minute.
- Sanity-checking an asking price against what similar homes in the same area recently sold for, which is roughly what an appraiser does.
- Pricing an extension. If space in your area is worth $250 a square foot and an addition costs $180 a square foot to build, the arithmetic is encouraging. If it costs $300, rather less so.
That last use is the most practical one and the most often overlooked.
Before you rely on the number
- Use sold prices, not asking prices, where you can. Asking prices measure optimism.
- Keep the comparison local. Price per square foot varies more between neighbourhoods than almost anything else, so an average across a city is not useful for a single street.
- Check the area source. Tax records, listing agents and appraisers do not always agree, and the discrepancy is sometimes large.
- Never use it alone. It is one input into a decision, and it is the one that most reliably flatters the wrong house.
Frequently asked questions
How do I calculate price per square foot?
Divide the price by the floor area. A $450,000 house with 1,800 square feet works out at $250 per square foot. That is the whole calculation, the difficulty is in knowing which square feet were counted.
How do I convert price per square foot to per square metre?
Multiply by 10.7639, because a square metre is 10.7639 square feet. $250 per square foot is $2,690.98 per square metre. The calculator shows both, plus square yards.
Is a lower price per square foot always better?
No. It compares size against cost and ignores everything else, location, condition, layout, land, age and what the area is actually worth. A large house in a poor location always looks good on this measure, which is precisely why it should never be the only one.
Which areas count towards square footage?
Usually finished, heated living space measured to the outside walls, the ANSI Z765 standard in the US. Garages, unfinished basements, attics and open porches normally do not count, though practice varies and listings are not always consistent. Two listings for the same house can differ by hundreds of square feet.
Why do estate agents use it?
Because it is the quickest way to compare properties of different sizes in one area, and it is the basis of most appraisal comparison work. It is a screening tool: it tells you which places are worth looking at, not which one to buy.
Does price per square foot fall as houses get bigger?
Usually, yes. Larger homes tend to cost less per square foot because the expensive parts, kitchen, bathrooms, mechanical systems, the land itself, do not scale with floor area. Comparing a small house to a large one on this measure is therefore unfair to the small one.
Related calculators
- Real Estate CalculatorEnter the price, your mortgage and the running costs, and a rent for a similar home.
- Rental Property CalculatorEnter the price, the rent and the real running costs.
- Rent vs Buy CalculatorEnter the home and the rent.
- Square Footage CalculatorAdd each part of the room or plot as a shape, say whether it is added or taken away, and measure in feet, inches, yards, metres or centimetres.
- Area ConverterConvert any area.
- House Affordability CalculatorEnter your income, other debts and down payment.
- Marla & Kanal ConverterConvert between marla, kanal and every other land unit.
Sources
- ANSI Z765: square footage measurement standard for single-family homes
- U.S. Census Bureau: characteristics of new housing
This tool is for information only and is not financial advice. Figures are estimates, confirm anything you act on with your lender or a qualified adviser.