Skip to content
thecalculatorstudio

Marla, Kanal & Square Feet Converter

Convert between marla, kanal and every other land unit. A marla is not the same size everywhere, so pick the standard that matches your documents, the difference reaches 21%.

Last reviewed

The British-era standard still used in land records and older title documents. One acre is exactly 8 kanal.

Same area, every way

1,361.25 sq ft

5.00 marla

Marla
5.000
Kanal
0.2500
Square feet
1,361.25
Square yards
151.25
Square metres
126.46
Acres
0.0313

This answer uses 272.25 sq ft per marla. A marla is not one fixed size in Pakistan, on another standard the same 5.00 marla would be a different plot. Check the figure on your own title documents before relying on it.

A marla is not one size, and that is the whole problem

Every other converter on this subject will tell you a marla is 272.25 square feet, or 225, and move on. Both are right. Neither is the answer.

The same “5 marla plot” can be any of these:

Standard Square feet in a marla A 5 marla plot
Traditional / revenue records 272.25 1,361.25 sq ft
Rural 270 1,350 sq ft
Suburban 250 1,250 sq ft
Housing society 225 1,125 sq ft

From 1,125 to 1,361 square feet is a 21% difference on the identical description. On a plot costing millions of rupees, that gap is not a rounding error. It is a room.

This is why the calculator above asks which standard you mean, and lets you type the exact figure from your own documents if none of them match. The number on your title deed is the only one that is authoritative.

What never changes

Two things are the same across every standard:

  • 20 marla make 1 kanal. Always.
  • 8 kanal make 1 acre in the traditional system.

And here is the part worth understanding: the traditional figures are not measurements anyone took. They follow exactly from the acre.

An acre is exactly 43,560 square feet. So:

  • 1 kanal = 43,560 ÷ 8 = 5,445 sq ft exactly
  • 1 marla = 43,560 ÷ 160 = 272.25 sq ft exactly
  • 1 marla = 272.25 ÷ 9 = 30.25 sq yd exactly

Nothing is rounded: the traditional figures are simply the acre divided down.

The housing-society marla of 225 square feet has a different logic: it is exactly 25 square yards, a round number on a plot map. Tidy to lay out, and no longer connected to the acre.

Plot sizes you will see in listings

Traditional standard:

Plot Square feet Square yards Square metres
3 marla 816.75 90.75 75.88
5 marla 1,361.25 151.25 126.46
7 marla 1,905.75 211.75 177.05
10 marla 2,722.50 302.50 252.93
1 kanal 5,445 605 505.86

Housing society standard (225 sq ft):

Plot Square feet Square yards Square metres
3 marla 675 75 62.71
5 marla 1,125 125 104.52
7 marla 1,575 175 146.32
10 marla 2,250 250 209.03
1 kanal 4,500 500 418.06

Note what the society column does: every figure in square yards is a round number. That is the giveaway. Those plots were laid out in yards, not derived from an acre.

The bigger units

Unit Equals
1 kanal 20 marla
1 acre (killa) 8 kanal · 160 marla
1 murabba 25 acres · 200 kanal

A murabba is the square block used in canal colony land settlement: 25 acres, or 1,000 marla. You will meet it in agricultural records far more than in city property.

What this calculator will not tell you

Bigha, biswa, ghumao and kacha/pakka variants. These vary enormously, sometimes between neighbouring districts, sometimes between the same district’s own historical records. A bigha is not one thing in the way that a kilometre is.

Publishing a single confident conversion for them would produce a number that is wrong for a large share of readers, on exactly the kind of transaction where being wrong is expensive. If you need one, take the figure from the relevant revenue record, not from a general table on the internet.

Before you sign anything

  • Check the standard your society or record uses. It will be in the allotment letter, the site plan or the revenue record.
  • Compare listings in square feet, not marla, when you are weighing plots from different schemes. The marla figure is not comparable across them; the square footage is.
  • Covered area is not plot area. A “10 marla house” describes the plot. The built area depends on how many floors and how much setback the bylaws require.
  • Verify against the record, not the advert. The number in the title documents is the one you are buying.

Why price per marla is misleading

Two plots are both advertised at Rs 4,000,000 a marla. If one scheme uses a 225 sq ft marla and the other uses the traditional 272.25 sq ft, the price per square foot is Rs 17,777.78 against Rs 14,692.38. The second plot is 17.36% cheaper for the same space. A 10 marla plot at that rate costs Rs 40,000,000 in either scheme but gives 2,250 sq ft in the first and 2,722.5 sq ft in the second, which is 472.5 sq ft more, or 2.1 society marlas.

Always divide the price by the area in square feet before you compare two listings.

Hectares

A hectare is 10,000 m², which is 107,639.10 sq ft. That is 395.37 traditional marla (272.25 sq ft each), or 478.40 marla at the 225 sq ft society standard.

Frequently asked questions

How many square feet are in one marla?

It depends which standard applies. In the traditional revenue system it is exactly 272.25 square feet, because an acre is exactly 8 kanal or 160 marla. Many housing societies lay out a marla as 225 square feet instead, and 250 and 270 are also found. The figure on your own title documents is the one that counts.

How many marla are in one kanal?

Twenty, on every standard. That part does not vary, only the size of the marla itself does. So a kanal is 5,445 square feet traditionally, or 4,500 square feet on the 225 standard.

How many kanal are in an acre?

Eight, in the traditional system, which also means 160 marla. These are not approximate: an acre is exactly 43,560 square feet, so a marla is exactly 43,560 ÷ 160 = 272.25 square feet. The traditional figures are simply the acre divided down.

Why do different websites give different answers?

Because they each pick one standard and present it as the only one. A 5 marla plot is 1,125 square feet on the housing society standard and 1,361 square feet on the traditional one, a 21% difference on the same words. Any converter that does not ask which standard you mean is guessing on your behalf.

How big is a 5 marla or 10 marla house?

On the common housing society standard, 5 marla is 1,125 square feet and 10 marla is 2,250 square feet, the plot, not the built area. On the traditional standard the same descriptions mean 1,361 and 2,722 square feet. Always check which one a listing is using.

What about bigha, biswa and ghumao?

They vary far more than the marla does, sometimes between neighbouring districts, and no single conversion factor would be honest. If you need one, use the figure stated in the relevant revenue record rather than a general table.

Related calculators

More Pakistan calculators

Sources

This tool is for information only and is not legal or tax advice. Rules change and vary by case, confirm with a qualified professional.