Skip to content
thecalculatorstudio

Matric and Inter Percentage Calculator: Your Marks as a Percentage

Enter your Part I and Part II marks and the totals printed on your result card. You will see the overall percentage, the percentage in each part, and the Part II marks you need for a target.

Last reviewed

%

Overall percentage

78.18%

860 out of 1,100 marks

Class 9 (Part I)
76.36%
Class 10 (Part II)
80.00%

The totals differ between boards, so enter the total printed on your result card. Percentage here is marks over total marks; your board’s grade bands may differ.

The calculation

Your result card shows the marks you got in each part and the total marks. The percentage is:

Percentage = marks obtained ÷ total marks × 100

For matric that is Part I (Class 9) and Part II (Class 10). For intermediate it is Part I (first year) and Part II (second year). The overall percentage uses the two parts together: add the marks you got, add the totals, and divide.

Totals are not the same everywhere. The Khyber Pakhtunkhwa Medical University’s 2025–26 merit list, for example, shows matric and intermediate results out of 1,100, 1,200 and 900 depending on the board and the group. That is why the calculator asks for the total of each part and does not assume one.

Worked examples

Marks 420 and 440, each part out of 550. The total is 860 out of 1,100. The percentage is 78.18%. Part I is 420 ÷ 550 = 76.36%, and Part II is 440 ÷ 550 = 80.00%.

An intermediate result of 1,006 out of 1,200. 1,006 ÷ 1,200 = 83.83%.

Reaching a target. With 420 in Part I and an overall target of 85% of 1,100 marks, you need 0.85 × 1,100 = 935 marks overall. Take off the 420, and Part II needs 515 out of 550. The calculator rounds the marks up to a whole mark, because a fraction of a mark cannot be earned.

Marks out of 1,100 as a percentage

Marks obtained Percentage
550 50.00%
660 60.00%
770 70.00%
880 80.00%
935 85.00%
990 90.00%

Points to check

  • The totals. Enter the totals printed on your result card. Some groups and boards have different ones.
  • Grades. Grade bands such as A+ or A are set by each board and can change. The calculator gives the percentage only.
  • Equivalence. Results from other systems are converted by the IBCC. Use the equated marks and total from the certificate.
  • Rounding. Percentages are rounded to two decimal places. A board’s own rounding may differ in the second decimal.
  • Next steps. Admission usually weights these results with an entry test. See the MDCAT aggregate calculator and the university merit calculator, and the percentage calculator for general percentages.

What Part II must score

Suppose Part I was 450 out of 550, which is 81.82%. With Part II also out of 550, the whole result is out of 1,100. The marks needed in Part II for each overall target are:

Target Marks needed overall Needed in Part II
70% 770 320
80% 880 430
85% 935 485
90% 990 540
95% 1,045 595, which is out of reach

Full marks in Part II would give 1,000 out of 1,100, which is 90.91%, so 95% is not possible whatever happens next. The calculator marks a target like this as out of reach.

The parts are weighted by their totals

An overall percentage is not the average of the two part percentages unless both parts have the same total. If Part I is 300 out of 400 (75%) and Part II is 400 out of 800 (50%), the overall result is 700 ÷ 1,200 = 58.33%, not 62.5%. The bigger paper counts for more.

Frequently asked questions

How do I calculate my matric percentage?

Add your Part I and Part II marks, divide by the total marks, and multiply by 100. Marks of 420 and 440 out of 550 each give 860 ÷ 1,100 × 100 = 78.18%.

What are the total marks for matric and inter?

It depends on the board and the group. Merit lists show totals such as 1,100, 1,200 and 900. The calculator asks for the total of each part so that it follows your own result card.

How do I work out the marks I need in Part II?

Enter your Part I marks and the overall percentage you want. The calculator finds the marks you need overall, rounded up to a whole mark, and takes your Part I marks off. For 85% of 1,100 you need 935 marks, so with 420 in Part I you need 515 in Part II.

Is the percentage the same as the grade?

No. Boards award grades such as A+ or A by percentage bands, and the bands differ between boards and years. The calculator gives the percentage only. Check your board's notification for its grade bands.

Can I use this for O and A levels?

Equivalence for those is decided by the IBCC, which converts the results into equated marks. Enter the equated marks and total shown on your equivalence certificate instead of your raw results.

Is the percentage used for university admission?

Often as part of a weighted merit aggregate, with the entry test. The mdcat and university merit calculators on this site work that out. Admission rules differ for each university and year.

Related calculators

More Pakistan calculators

Sources

This tool is for information only and is not legal or tax advice. Rules change and vary by case, confirm with a qualified professional.