Skip to content
thecalculatorstudio

University Grade Calculator: UK Degree Classification

Enter an average and a weight for each year. You get your weighted average, your class (first, 2:1, 2:2 or third), and the average you would need in your final year for each class.

Last reviewed

%
%
%

Weights are relative: 0, 1 and 2 means year 1 does not count, and year 3 counts double year 2. Use your university’s weighting.

Weighted average

66.00%

Upper second-class honours (2:1) · 4.00 points short of First

Share of the degree: year 1
0.00%
year 2
33.33%
year 3
66.67%
Final-year average needed for each class
ClassNeeded in year 3
First (70%)74.00%
2:1 (60%)59.00%
2:2 (50%)44.00%
Third (40%)29.00%

Universities set their own rules for rounding, for borderline marks and for which modules count. A result within a point or so of a boundary is a question for your university’s regulations. This page is a guide, not your official classification.

How a UK degree is classified

A UK honours degree is given a class from an overall average mark. The standard boundaries, as the Prospects careers service sets them out, are:

Class Overall average
First-class honours (a first) 70% and above
Upper second-class honours (2:1) 60% to under 70%
Lower second-class honours (2:2) 50% to under 60%
Third-class honours (a third) 40% to under 50%

A pass mark is typically 40%, and a student who just misses a third may be given an ordinary degree. The overall average is a credit-weighted average of module marks, so a 30-credit module counts for twice as much as a 15-credit one. How the years are combined is for each university to decide. Some count only the final year, some combine years two and three, and Leeds, for example, weights year two to year three at 1 to 2.

What the calculator does

Enter an average for each year and a weight for each. The weights are relative, so 0, 1 and 2 means year 1 does not count and year 3 counts twice as much as year 2. The calculator gives the weighted average, the class, and how far you are below the next boundary. It also shows the final-year average you would need for each class, which is the question most students are actually asking in the second half of their course.

Choose “See what I need in my final year” if you do not have a final average yet. Then you enter years 1 and 2 only.

The sums

Weighted average = (w1 × year 1 + w2 × year 2 + w3 × year 3) ÷ (w1 + w2 + w3).

Needed in year 3 = (boundary × (w1 + w2 + w3) − w1 × year 1 − w2 × year 2) ÷ w3.

Worked examples

With weights 0 : 1 : 2 (year 1 ignored, year 3 double year 2):

Year 2 Year 3 Weighted average Class
62 68 66.00% 2:1
65 72 69.67% 2:1
58 71 66.67% 2:1
48 52 50.67% 2:2
  • 62 and 68: (62 + 2 × 68) ÷ 3 = 198 ÷ 3 = 66.00%, a 2:1, and 4 points short of a first.
  • 65 and 72: (65 + 144) ÷ 3 = 69.67%, a 2:1, 0.33 points short of a first. A mark so close to the boundary is exactly where a university’s borderline rules apply.
  • With equal weights of 1 : 1 and year averages of 60 and 74: (60 + 74) ÷ 2 = 67.00%, a 2:1.

What is needed in the final year

Weights 0 : 1 : 2 and a year 2 average of 65:

Class Needed in year 3
First (70%) 72.50%
2:1 (60%) 57.50%
2:2 (50%) 42.50%
Third (40%) 27.50%

For a first: (70 × 3 − 65) ÷ 2 = 145 ÷ 2 = 72.5%. If the answer is above 100% the class is out of reach, and if it is zero or below it is already secured. With a year 2 average of 0 the first would need 105%, which is not possible.

Borderline cases

Universities handle marks close to a boundary in different ways. The Office for Students defines borderline performance as outcomes close to, but just above or below, the boundary for a class under the rules in the university’s algorithm. Its 2025 report on degree classification algorithms also raises concerns about steps that some algorithms include, such as discounting the credits with the lowest marks or awarding the best result from several algorithms, which can lift a class. This calculator compares the unrounded average with each boundary and shows two decimals. It does not apply rounding or borderline rules, because they are the university’s to set. Always check your course handbook.

Common mistakes

  • Averaging the years equally. Many universities do not.
  • Counting the first year. Some do not use it for the classification at all.
  • Averaging module marks without credits. A bigger module should count for more.
  • Reading a 69.5 as a first. The boundary is 70, and any rounding is the university’s rule.
  • Using this as an official result. Your university’s regulations decide.

For a weighted course grade, use the grade calculator, and for an American-style GPA, the GPA calculator. To turn a percentage into a 10-point CGPA, see the percentage to CGPA calculator.

How it is calculated

Everything is exact decimal arithmetic. The weighted average is compared with 70, 60, 50 and 40 without rounding. The needed final-year mark is the boundary times the total weight, less the points already earned, divided by the final-year weight. Results are shown to two decimals.

Frequently asked questions

What are the UK degree classification boundaries?

The standard boundaries are 70% and above for a first, 60% to under 70% for a 2:1, 50% to under 60% for a 2:2 and 40% to under 50% for a third. A pass mark is typically 40%. Each university sets its own rules for how marks are combined.

How is a degree classification calculated?

From a credit-weighted average of module marks, with the years combined by the university’s own weights. Some count only the final year, some combine years two and three, and Leeds weights them 1 to 2. Enter your weights to match your university.

What do I need in my final year for a 2:1?

Choose "See what I need in my final year" and enter years 1 and 2. With weights 0, 1 and 2 and a year 2 average of 65, you need (60 × 3 − 65) ÷ 2 = 57.5% in year 3 for a 2:1 and 72.5% for a first.

What if I am 0.3 points below a boundary?

That is a borderline result. Universities have their own rules for marks close to a boundary, and the Office for Students defines borderline performance as close to, but just above or below, a class boundary. Check your university’s regulations.

Does the calculator round the average?

No. It compares the exact average with 70, 60, 50 and 40, so 69.97 is a 2:1 though it shows as 69.97. If your university rounds, apply its rule yourself.

Does the first year count?

At many universities it does not count towards the classification, which is why year 1 starts with a weight of 0. If yours counts it, enter its weight and average.

Related calculators

Sources