Skip to content
thecalculatorstudio

Percentage to CGPA Calculator (Out of 10)

Enter your percentage and choose the rule. CBSE divides by 9.5, VTU divides by 10 and adds 0.75, or you can enter your own multiplier. You get the CGPA and the working.

Last reviewed

%

CGPA (out of 10)

7.89

CBSE: percentage = 9.5 × CGPA

Formula
CGPA = percentage ÷ 9.5
Working
75 ÷ 9.5 = 7.8947

An indicative conversion for a 10-point CGPA. It does not turn a percentage into a 4.0 GPA. The institution you apply to decides which rule it accepts, so check its requirement.

Turning a percentage into a CGPA

If your result is a percentage and a form asks for a CGPA out of 10, you need the conversion in the other direction from the usual one. This page does that: enter your percentage, choose the rule, and read the CGPA with the working shown.

There is no single rule. CBSE, VTU and individual universities each say what they use, so the calculator offers the published rules and a multiplier of your own. It converts to a 10-point CGPA only. It does not give a 4.0 GPA, which is a different scale with different cut-offs.

The rules, turned round

Rule Percentage from CGPA CGPA from percentage
CBSE 9.5 × CGPA percentage ÷ 9.5
VTU (2015, 2017 and 2018 schemes) (CGPA − 0.75) × 10 percentage ÷ 10 + 0.75
A plain multiple of m m × CGPA percentage ÷ m

CBSE’s Circular No. 24 of 28 May 2010 describes 9.5 × CGPA as an indicative equivalence, a guide and not a rule that every institution must follow. VTU’s page on its CGPA standard formula gives (CGPA − 0.75) × 10 for the 2015, 2017 and 2018 schemes only. For any other scheme, or any other purpose, the receiving institution’s own rule is the one that counts.

Percentage to CGPA, side by side

Percentage CBSE (÷ 9.5) VTU (÷ 10 + 0.75) Plain (÷ 10)
40 4.21 4.75 4.00
50 5.26 5.75 5.00
55 5.79 6.25 5.50
60 6.32 6.75 6.00
65 6.84 7.25 6.50
70 7.37 7.75 7.00
75 7.89 8.25 7.50
80 8.42 8.75 8.00
85 8.95 9.25 8.50
90 9.47 9.75 9.00
95 10.00 n/a 9.50

A dash means the rule would give a CGPA above 10, so it does not apply there. The VTU formula tops out at a percentage of 92.5, which is a CGPA of 10, and CBSE’s at 95.

Worked examples

  • 87.4% by the CBSE rule: 87.4 ÷ 9.5 = 9.2.
  • 74.5% by the VTU formula: 74.5 ÷ 10 + 0.75 = 8.2.
  • 75% by the CBSE rule: 75 ÷ 9.5 = 7.8947, shown as 7.89.
  • 60% with your own multiplier of 9.5: 60 ÷ 9.5 = 6.3158, shown as 6.32.

The same percentage gives different CGPAs depending on the rule. At 75%, CBSE gives 7.89 and VTU 8.25, a gap of 0.36, and at 40% the gap is 0.54. A form that asks for a CGPA should say which rule it expects. If it does not, give your result on the scale you were graded on and say how you converted it.

Common mistakes

  • Using the wrong direction. To go from CGPA to percentage you multiply, and to go back you divide. The two directions are not the same sum.
  • Treating the conversion as official. It is an indicative equivalence unless the institution says otherwise.
  • Converting to a 4.0 GPA with a 10-point formula. A 4.0 scale has different bands.
  • Applying VTU’s formula to a different scheme. It is stated for three named schemes only.
  • Rounding too soon. Keep two decimals until the end, as the calculator does.

To go from a CGPA to a percentage, use the CGPA to percentage calculator. To average a set of grades, use the GPA calculator, and for a weighted course grade, the grade calculator.

How it is calculated

The percentage is held as an exact decimal. CBSE divides it by 9.5, VTU divides it by 10 and adds 0.75, and your own rule divides it by the multiplier you enter. The CGPA is rounded half up to two decimals for display. If a rule would give a CGPA above 10, the calculator says so instead of showing a figure.

Frequently asked questions

How do I convert a percentage to CGPA?

It depends on the rule. Under the CBSE rule divide the percentage by 9.5, so 87.4% is a CGPA of 9.2. Under the VTU formula divide by 10 and add 0.75, so 74.5% is 8.2. Your university may state its own rule.

What is the CBSE formula for percentage to CGPA?

CBSE Circular No. 24 of 28 May 2010 gives percentage = 9.5 × CGPA as an indicative equivalence, so the reverse is CGPA = percentage ÷ 9.5. 75% is 7.89. It is a guide, not a rule that every institution must use.

Why does a percentage over 95 give an error?

Because the CBSE rule would give a CGPA above 10. 95% is exactly 10.00, and 97% would be 10.21. The VTU formula reaches 10 at 92.5%. The calculator says the formula does not apply instead of showing a CGPA over 10.

Can I convert a percentage to a 4.0 GPA?

Not with this page. It converts to a CGPA out of 10 only. A 4.0 GPA is a different scale, and the receiving institution usually has its own table for it.

Can I use my own conversion rule?

Yes. Choose "My university" and enter the multiplier, so the CGPA is the percentage divided by it. The calculator does not claim that any particular university uses a given multiplier.

Which rule do admissions and employers use?

The one they state. A conversion is an indicative equivalence, so check the requirement of the institution or employer, and say which rule you used if the form allows it.

Related calculators

Sources