CGPA to Percentage Calculator: CBSE, VTU and Your Own Rule
Enter your CGPA and choose the rule: CBSE multiplies by 9.5, VTU uses (CGPA − 0.75) × 10, or enter your own multiplier. You get the percentage with the formula and the working, and can convert back too.
Last reviewed
Percentage
87.40%
CBSE: percentage = 9.5 × CGPA
- Formula
- percentage = 9.5 × CGPA
- Working
- 9.2 × 9.5 = 87.4
An indicative conversion. The institution you are applying to sets the rule it uses, so check its requirement before you rely on a percentage.
What this calculator does
Many schools and universities, especially in India, report results as a CGPA, a cumulative grade point average out of 10. Forms for jobs and admissions often ask for a percentage instead. This calculator turns one into the other, using the rules that CBSE and VTU publish, or a rule of your own, and shows the formula and the working so you can check it.
There is no single conversion that every institution uses. The calculator offers three rules and says plainly where each comes from.
The three rules
CBSE: 9.5 × CGPA
CBSE’s Circular No. 24 of 28 May 2010, on admission to Class XI after grading was introduced in Classes IX and X, says that an indicative equivalence of grade point and percentage of marks can be computed as follows:
- Subject-wise indicative percentage of marks = 9.5 × the grade point of the subject
- Overall indicative percentage of marks = 9.5 × CGPA
The CGPA in that scheme is worked out excluding the additional sixth subject. The circular calls the figure indicative, which means a guide. It does not say every institution must use it.
Worked examples:
- CGPA 9.2 → 9.2 × 9.5 = 87.4%
- CGPA 10 → 10 × 9.5 = 95%
- CGPA 8.5 → 8.5 × 9.5 = 80.75%
- CGPA 7.1 → 7.1 × 9.5 = 67.45%
VTU: (CGPA − 0.75) × 10
Visvesvaraya Technological University’s page on the CGPA standard formula says: standard formula to calculate percentage from CGPA for 2015, 2017 and 2018 scheme only, and gives percentage = (CGPA − 0.75) × 10.
Worked examples:
- CGPA 8.2 → (8.2 − 0.75) × 10 = 74.5%
- CGPA 10 → (10 − 0.75) × 10 = 92.5%
- CGPA 7 → (7 − 0.75) × 10 = 62.5%
Notice the scheme restriction in VTU’s own words. If you are on a different scheme, or the percentage is for a different purpose, check what applies.
Your own multiplier
Some universities state a plain multiple, such as percentage = CGPA × 10. If yours does, choose “My university” and enter the multiplier. This calculator does not claim that any named university uses a particular multiplier, because the rule is the university’s to state. Check its regulations or its website first.
Comparing the rules
The same CGPA gives different percentages under different rules.
| CGPA | CBSE (× 9.5) | VTU ((CGPA − 0.75) × 10) | A plain × 10 |
|---|---|---|---|
| 6.0 | 57.00% | 52.50% | 60.00% |
| 6.5 | 61.75% | 57.50% | 65.00% |
| 7.0 | 66.50% | 62.50% | 70.00% |
| 7.5 | 71.25% | 67.50% | 75.00% |
| 8.0 | 76.00% | 72.50% | 80.00% |
| 8.5 | 80.75% | 77.50% | 85.00% |
| 9.0 | 85.50% | 82.50% | 90.00% |
| 9.5 | 90.25% | 87.50% | 95.00% |
| 10.0 | 95.00% | 92.50% | 100.00% |
At a CGPA of 8.0 the answers run from 72.5% to 80%, a gap of 7.5 percentage points. That is why the rule matters, and why an application should say which one you used.
Percentage back to CGPA
Choose “Percentage to CGPA” to go the other way. The rule is simply reversed:
- CBSE: CGPA = percentage ÷ 9.5. So 87.4% is 9.2, and 95% is 10.
- VTU: CGPA = percentage ÷ 10 + 0.75. So 74.5% is 8.2.
- Your multiplier: CGPA = percentage ÷ the multiplier.
The calculator refuses a percentage that would give a CGPA above 10 under the chosen rule. A percentage of 100 under the CBSE rule would need a CGPA of 10.53, which does not exist.
Which rule should you use?
The one the receiving institution asks for. An admissions office or an employer may have its own conversion, and it may differ from the ones here. If it asks for a percentage and gives a method, use that. If it asks for a percentage and does not say, state which rule you used, for example “87.4% (9.5 × CGPA, per CBSE Circular 24/2010)”. That lets the reader check your figure.
Keep the original CGPA on your documents as well. A converted percentage is a convenience and not a new result.
Rounding
The calculator shows the percentage to two decimal places, rounded half up on exact decimals. 7.1 × 9.5 is exactly 67.45 and not 67.44999 as binary arithmetic can show. The rules above do not say how to round, so the unrounded working is shown beside the result.
If your CGPA is not out of 10
This calculator is for a CGPA out of 10. A grade point average out of 4, as used in the United States, is a different scale, and the GPA calculator works with it. The grade calculator works out a weighted percentage for a course directly from scores, and the percentage calculator handles general percentage sums. For averages of several results, with weights if the credits differ, use the average calculator.
How it is calculated
The CGPA, percentage and multiplier are read as exact decimals. Under the CBSE rule the percentage is the CGPA times 9.5, under the VTU rule it is the CGPA less 0.75 times 10, and under your own it is the CGPA times your multiplier. Going back divides, or for VTU divides by 10 and adds 0.75. The result is shown to two decimals, rounded half up. A CGPA must be from 0 to 10, a percentage from 0 to 100, and a result outside the range of the formula, such as a negative percentage or a CGPA above 10, is refused with an explanation.
Frequently asked questions
How do I convert CGPA to percentage?
It depends on the rule that applies. CBSE multiplies the CGPA by 9.5, so a CGPA of 9.2 is 9.2 × 9.5 = 87.4%. VTU subtracts 0.75 and multiplies by 10, so 8.2 is (8.2 − 0.75) × 10 = 74.5%.
What does CBSE say about the 9.5 multiplier?
CBSE Circular No. 24 of 28 May 2010 says an indicative equivalence of grade point and percentage of marks can be computed as 9.5 × the grade point for a subject, and 9.5 × CGPA overall. It calls it indicative, and it excludes the additional sixth subject.
Which VTU schemes use (CGPA − 0.75) × 10?
VTU's CGPA standard formula page says the formula is for the 2015, 2017 and 2018 schemes only. Check which scheme you are on and whether your purpose uses the same rule.
Can I use my own multiplier?
Yes, if your university states a rule such as percentage = CGPA × 10 or another multiple, choose "My university" and enter it. The calculator does not claim any particular university uses a given multiplier.
Which rule should I use for an admission or a job?
The rule of the institution or employer you are applying to. A conversion is an indicative equivalence, and the receiving body decides which one it accepts, so check its requirement.
Can I convert a percentage back to CGPA?
Yes. Choose "Percentage to CGPA". For CBSE that is the percentage divided by 9.5, so 87.4% is 9.2, and for the VTU formula it is the percentage divided by 10 plus 0.75, so 74.5% is 8.2.
Related calculators
- GPA CalculatorEnter each course's grade and credit hours.
- Grade CalculatorEnter each graded item with its score, the points it was out of and its weight in the course.
- College Cost CalculatorEducation costs rise every year, including through the course itself.
- Percentage CalculatorPick the question you are actually asking.
- Average CalculatorPaste a list of numbers to get the average, with the sum, count, smallest and largest.
- Percentage Change CalculatorEnter a starting and a new value to get the percentage change, or apply a percentage to a value, or find the value before a change.