Skip to content
thecalculatorstudio

Percentage Change Calculator: Increase, Decrease and the Way Back

Enter a starting and a new value to get the percentage change, or apply a percentage to a value, or find the value before a change. The calculator also shows the percentage needed to change it back.

Last reviewed

Percentage change

+50%

An increase of 50

Multiplier
× 1.5
Difference
50
To change it back
-33.33333333%

A percentage change always depends on the starting value. A rise of 50% is not undone by a fall of 50%: the way back is shown above.

What percentage change tells you

A percentage change says how big a move is compared with where it started. A price going from 100 to 150 has risen by 50 because 50 is half of 100. This calculator works that out, and also does the two questions that come up with it: what a value becomes after a percentage increase or decrease, and what a value was before one.

The formula

percentage change = (new value − old value) ÷ old value × 100

A positive answer is an increase and a negative answer is a decrease.

  • 100 to 150: (150 − 100) ÷ 100 × 100 = +50%.
  • 80 to 60: (60 − 80) ÷ 80 × 100 = −25%.
  • 0.2 to 0.3: (0.3 − 0.2) ÷ 0.2 × 100 = +50%. Done exactly, with none of the stray decimals that appear when a computer works in binary fractions.
  • 40 to 0: a fall of −100%. Everything has gone.

The multiplier

A percentage change is the same as multiplying by a number. An increase of 50% multiplies by 1.5, and a decrease of 25% multiplies by 0.75. The calculator shows the multiplier, because it is the quickest way to apply the same change to several values.

Applying a percentage

To raise or lower a value by a percentage, multiply by 1 + the percentage ÷ 100.

  • 200 up 15%: 200 × 1.15 = 230.
  • 200 down 15%: 200 × 0.85 = 170.
  • 80 up 25%: 80 × 1.25 = 100.

Why the way back is different

The same percentage up and then down does not return you to where you started, because the second percentage is taken of a different number.

  • 200 up 15%, then down 15%: 200 × 1.15 = 230, and 230 × 0.85 = 195.5, not 200.
  • 100 up 50% is 150. To return to 100 you need a fall of (100 − 150) ÷ 150 = −1/3, which is −33.33%.

The calculator shows this as “To change it back”. The table gives the figure for some common changes.

Change Multiplier To change it back
+5% × 1.05 −4.76%
+10% × 1.1 −9.09%
+25% × 1.25 −20%
+50% × 1.5 −33.33%
+100% × 2 −50%
−10% × 0.9 +11.11%
−25% × 0.75 +33.33%
−50% × 0.5 +100%

Two rises in a row add up to more than their sum. Two rises of 10% make 1.1 × 1.1 = 1.21, a rise of 21%, not 20%.

Finding the original value

If you know the final value and the percentage change it went through, divide by the multiplier.

  • A price of 60 after a 20% rise started at 60 ÷ 1.2 = 50.
  • A final 230 after a 15% rise started at 230 ÷ 1.15 = 200.
  • A final 60 after a 25% fall started at 60 ÷ 0.75 = 80.

The common mistake is to take the percentage off the final value. 20% of 60 is 12, which gives 48, not 50. The percentage was taken of the original, not of the result.

Percent or percentage points

When something that is already a percentage changes, there are two ways to describe the move, and they are not the same.

  • A rate rising from 4% to 5% is 1 percentage point, because 5 − 4 = 1.
  • It is also a rise of 25%, because 1 ÷ 4 = 0.25.

Use percentage points for the difference between two percentages and percent for how much bigger one is than the other. Mixing them up changes the size of a headline by a factor of four, as in this example.

Negative values and zero

  • Zero as a starting value: any rise from zero is infinite in relative terms, so no percentage exists. The calculator says so.
  • Negative starting values: the change is divided by the size of the starting value, so the sign follows the direction of the move. From −50 to −25 the value rose by 25, which is half of 50, so it is +50%. Some conventions differ here, so say which you used if you share the figure.

For one-off percentage questions such as “what is 15% of 200?”, use the percentage calculator. To take a percentage off a price, there is the percent off calculator and the discount calculator. For the average of a list, the average calculator, and for fractions, the fraction calculator.

How it is calculated

All arithmetic is exact decimal arithmetic to 40 digits, so 0.2 to 0.3 is exactly 50% and 0.1 raised by 200% is exactly 0.3. A change is worked as the difference divided by the absolute value of the starting value, times 100. Applying a percentage multiplies by 1 + p ÷ 100, and finding the original divides by it. The way back from a change is the old value minus the new, divided by the size of the new value, times 100. Results are shown to ten significant figures with trailing zeros removed.

Frequently asked questions

How do you calculate percentage change?

Subtract the old value from the new one, divide by the old value, and multiply by 100. From 100 to 150 that is (150 − 100) ÷ 100 × 100 = 50%. A negative answer is a decrease: 80 to 60 is (60 − 80) ÷ 80 × 100 = −25%.

Why does a 50% rise not cancel a 50% fall?

Because each percentage is taken of a different starting value. 100 up 50% is 150, and 150 down 50% is 75, not 100. To get back from 150 to 100 you need a fall of one third, 33.33%.

What is the difference between percent and percentage points?

A move from 4% to 5% is one percentage point, but it is a 25% increase, because 1 ÷ 4 = 0.25. Use percentage points for the gap between two percentages, and percent for the relative change.

How do I find the original value after a percentage increase?

Divide the final value by 1 plus the percentage as a decimal. A price of 60 after a 20% rise started at 60 ÷ 1.2 = 50. Do not take 20% off 60: that gives 48, which is wrong.

What if the starting value is zero?

A change from zero cannot be given as a percentage, because dividing by zero is undefined. The calculator says so rather than showing a misleading number.

How are negative starting values handled?

The change is divided by the size of the starting value, so the sign follows the direction of the move. From −50 to −25 the value rose by 25, which is 50% of 50, so it is an increase of 50%.

Related calculators

Sources