Final Grade Calculator: What Do I Need on the Final?
Enter your grade now, how much the final counts and the grade you want. You will see the score you need on the final, whether it is within reach, and what other targets would take.
Last reviewed
You need on the final
92%
rounded up to a tenth, so scoring this reaches the target
- Course grade with 80% on the final
- 81.4%
- Lowest it can end
- 57.4%
- Highest it can end
- 87.4%
| Target | Needed on the final | Verdict |
|---|---|---|
| 50% | Any score | Already reached |
| 60% | 8.7% | Possible |
| 70% | 42.0% | Possible |
| 80% | 75.4% | Possible |
| 85% | 92.0% | Possible |
| 90% | 108.7% | Out of reach |
Assumes your current grade is a percentage of the course so far and that the final is weighted as you say. Check your syllabus for how your teacher rounds.
The formula
A course grade is a weighted average. If the final exam counts for a share w of the course (30% is w = 0.30), then:
Course grade = current grade × (1 − w) + final score × w
The first part is the grade you have already banked: your current grade, counted for the share of the course that is done. The second is what the final adds. To find the score you need, solve for the final:
Needed on the final = (target − current × (1 − w)) ÷ w
The calculator works this out in exact decimal arithmetic and rounds the score up to a tenth of a percent, so that scoring the figure shown always reaches the target.
Worked example
You have 82% going into the final, the final is worth 30% of the course, and you want 85%.
- The banked part is 82 × 0.70 = 57.4 points of the grade.
- You still need 85 − 57.4 = 27.6 points.
- The final gives w = 0.30 of each percent scored, so you need 27.6 ÷ 0.30 = 92%.
Check: 57.4 + 92 × 0.30 = 57.4 + 27.6 = 85. ✓
The same course for other targets:
| Target | Needed on the final | Verdict |
|---|---|---|
| 50% | Any score | Already reached |
| 60% | 8.7% | Possible |
| 70% | 42% | Possible |
| 80% | 75.4% | Possible |
| 85% | 92% | Possible |
| 90% | 108.7% | Out of reach |
Two of those are worth a word. Already reached means that 57.4% banked is above 50%, so even a 0 on the final leaves you at 57.4%. Out of reach means the score needed is above 100%. Unless your course offers extra credit, an 82% with a 30% final cannot finish at 90%: the best you can do is 57.4 + 100 × 0.30 = 87.4%.
If you score 80% on the final, your course grade is 57.4 + 80 × 0.30 = 81.4%.
Other examples
- 91.5% now, final worth 40%, target 90%. Banked: 91.5 × 0.60 = 54.9. Needed: (90 − 54.9) ÷ 0.40 = 35.1 ÷ 0.40 = 87.75, shown as 87.8%.
- 65% now, final worth 50%, target 70%. Banked: 32.5. Needed: (70 − 32.5) ÷ 0.50 = 75%.
The heavier the final, the more it can move your grade. A final worth 50% can lift a 65% to as much as 82.5% with a perfect score, while a final worth 10% can lift it to at most 68.5%.
Things to check
- Your current grade must be a percentage of the course so far. If your gradebook shows points, convert them: divide the points you have by the points available so far. The grade calculator does that for a list of assignments.
- The weight is the final’s share of the whole course grade, from your syllabus. If the final replaces your lowest test, or has a minimum pass mark of its own, those rules are not in this formula.
- Rounding rules vary. Some teachers round 89.5 up to 90, and some do not. Treat a result within half a point of a boundary with care.
- Extra credit. If you can score more than 100% on the final, raise the “Highest final score” box so that the calculator does not call a target out of reach.
To turn grades into a GPA use the GPA calculator, and for university classifications the university grade calculator. The test score calculator and the exam marks percentage calculator convert marks into percentages, and the percentage calculator handles the arithmetic in general.
Frequently asked questions
How do I calculate the grade I need on my final?
Use needed = (target − current × (1 − w)) ÷ w, where w is the weight of the final as a fraction. With 82% now, a final worth 30% and a target of 85%: (85 − 82 × 0.7) ÷ 0.3 = 27.6 ÷ 0.3 = 92%.
What if the score I need is over 100%?
Then the target is out of reach unless your course gives extra credit. The calculator compares the score you need with the highest score you enter, 100% by default. With 82% now and a final worth 30%, a 90% target needs 108.7%.
What does "already reached" mean?
It means you would meet the target even with 0% on the final, because the part of the grade you have already banked is enough. With 82% now and a final worth 30%, you have 57.4% banked, so a 50% target is already reached.
How do I enter the weight of the final?
As a percentage of the whole course grade, as on your syllabus. A final worth 30% of the grade means the earlier work makes up the other 70%. Midterms and coursework before the final all go into your grade now.
Why does the calculator round the score up?
So that the score shown always reaches the target. Needing 75.33% rounds to 75.4%. If it rounded down to 75.3%, you would finish a hair under the target. Check how your teacher rounds final grades.
Can I see my grade for a particular final score?
Yes. Enter a score in the "Try a final score" box. The course grade is your current grade × (1 − w) plus the final score × w, so 80% on the final in the example above gives 57.4 + 24 = 81.4%.
Related calculators
- Grade CalculatorEnter each graded item with its score, the points it was out of and its weight in the course.
- GPA CalculatorEnter each course's grade and credit hours.
- University Grade CalculatorEnter an average and a weight for each year.
- Test Score CalculatorEnter the number of questions and how many you got right.
- Percentage CalculatorPick the question you are actually asking.
- Exam Marks Percentage CalculatorEnter the marks obtained and the total marks for each subject.