Skip to content
thecalculatorstudio

Resistor Color Code Calculator (4, 5 and 6 Bands)

Choose the colours of the bands to read the resistance, its tolerance and the lowest and highest value it can have. Or enter a resistance to see which colours to look for.

Last reviewed

Resistance

4.7 kΩ ±5%

4700 Ω

Lowest it can be
4.465 kΩ
Highest it can be
4.935 kΩ

Hold the resistor with the tolerance band, which is often set a little apart from the others, on the right and read the bands from left to right.

How the colour code works

Small resistors are too tiny to print numbers on, so their value is marked with coloured bands. The code is standardised in IEC 60062. Each colour stands for a digit, a multiplier, a tolerance or a temperature coefficient, depending on which band it is.

Colour Digit Multiplier Tolerance Temperature coefficient
Black 0 × 1
Brown 1 × 10 ±1% 100 ppm/K
Red 2 × 100 ±2% 50 ppm/K
Orange 3 × 1,000 15 ppm/K
Yellow 4 × 10,000 25 ppm/K
Green 5 × 100,000 ±0.5%
Blue 6 × 1,000,000 ±0.25% 10 ppm/K
Violet 7 × 10,000,000 ±0.1% 5 ppm/K
Grey 8 × 100,000,000
White 9 × 1,000,000,000
Gold × 0.1 ±5%
Silver × 0.01 ±10%
(no band) ±20%

Grey, orange and yellow are also used for very tight tolerances, but published tables do not agree on their values, so the calculator does not offer them as tolerance colours.

Reading the bands

  • 4 bands: digit, digit, multiplier, tolerance.
  • 5 bands: digit, digit, digit, multiplier, tolerance. The third digit gives a more precise value.
  • 6 bands: the same as 5 bands, with a sixth band for the temperature coefficient.

The resistance is the digits read as a number, times the multiplier.

Worked examples

Bands Reading
Yellow, violet, red, gold 47 × 100 = 4.7 kΩ ±5%
Brown, black, red, gold 10 × 100 = 1 kΩ ±5%
Orange, orange, brown, gold 33 × 10 = 330 Ω ±5%
Yellow, violet, silver, gold 47 × 0.01 = 0.47 Ω ±5%
Green, blue, black, orange, brown 560 × 1,000 = 560 kΩ ±1%
Brown, black, black, red, brown 100 × 100 = 10 kΩ ±1%

The first row is the example given with the code on Wikipedia: yellow is 4, violet is 7 and red is × 100, giving 4,700 Ω with a gold, ±5% tolerance. For a 4.7 kΩ resistor with ±5% tolerance, the real value may be anywhere from 4,465 Ω to 4,935 Ω, since 5% of 4,700 is 235.

Finding the bands for a value

Enter the resistance and the tolerance, and the calculator gives the bands. A 4 band resistor holds two significant digits, so 4.7 kΩ is 47 × 100 (yellow, violet, red). A 5 band resistor holds three digits, so 4.7 kΩ is 470 × 10 (yellow, violet, black, brown). A value with more significant digits than the bands can hold, such as 4,730 Ω on a 4 band resistor, cannot be marked exactly, and the calculator says so.

Common mistakes

  • Reading from the wrong end. Put the tolerance band on the right.
  • Confusing brown, red and orange in poor light. Measure with a meter.
  • Forgetting the multiplier is a power of ten. Orange is × 1,000, not × 3.
  • Mixing up gold and silver as multipliers and as tolerances. Gold is × 0.1 as a multiplier, ±5% as a tolerance.
  • Trusting the marked value without its tolerance. A ±5% resistor can be 5% off.

To use the value in a circuit, try the Ohm’s law calculator. The voltage drop calculator covers cables, and the watts to amps calculator turns power into current.

The range of a real part

A 560 kΩ resistor with a ±1% tolerance can measure anywhere from 554,400 Ω to 565,600 Ω. A 330 Ω resistor at ±5% can be from 313.5 Ω to 346.5 Ω. If a circuit needs a closer value, choose a tighter band or measure each part.

A six-band example

Brown, black, black, red, brown and red is 100 × 100 = 10 kΩ ±1%, with a temperature coefficient of 50 ppm/K. Over a swing of 40 K, the value can drift by 50 × 40 = 2,000 parts per million, which is 0.2%, or 20 Ω.

Choosing a resistor for an LED

An LED that drops 2 V and is run at 20 mA from a 5 V supply needs (5 − 2) ÷ 0.02 = 150 Ω. The bands are brown, green, brown, gold: 15 × 10 = 150 Ω ±5%. The resistor dissipates 0.02² × 150 = 0.06 W, well inside the rating of a small part. The LED’s own voltage drop is on its datasheet, so check it before you rely on the 2 V used here.

How it is calculated

The value is the digits times the multiplier in exact decimal arithmetic, and the lowest and highest values are the value times one minus and one plus the tolerance. Resistances are shown with SI prefixes: kΩ, MΩ and GΩ.

Frequently asked questions

How do you read a 4 band resistor?

The first two bands are digits, the third is the multiplier and the fourth is the tolerance. Yellow, violet, red, gold is 4, 7, × 100 and ±5%, which is 4,700 Ω or 4.7 kΩ with a tolerance of ±5%.

What do 5 and 6 bands add?

A 5 band resistor has three digit bands before the multiplier and tolerance, for more precise values. A 6 band resistor adds a sixth band for the temperature coefficient, in parts per million per kelvin.

What are the colour values?

Black 0, brown 1, red 2, orange 3, yellow 4, green 5, blue 6, violet 7, grey 8 and white 9. As a multiplier these are powers of ten, and gold is × 0.1 and silver × 0.01.

What do the tolerance colours mean?

Brown ±1%, red ±2%, green ±0.5%, blue ±0.25%, violet ±0.1%, gold ±5%, silver ±10%, and no band ±20%. The tolerance tells you how far the real resistance may lie from the marked value.

Which tolerance colours are missing?

Grey, orange and yellow are used for very tight tolerances, but sources disagree about their values (older EIA practice differs from IEC 60062:2016). The calculator leaves them out. Check the maker's data sheet if you have such a resistor.

Why would I measure a resistor as well?

Colours fade, and some look alike, such as brown, red and orange in poor light. A multimeter reading confirms the value, and it should lie between the lowest and highest values the calculator shows.

Related calculators

Sources