Newton Metres (N·m) to Foot-Pounds (lbf·ft) Converter
Enter a torque in newton metres and read it in foot-pounds (pound-force feet). A foot-pound is 1.3558179 newton metres.
Last reviewed
To
73.756215 lbf·ft, and 1 N·m = 0.73756215 lbf·ft
Common conversions
The conversion
1 pound-force foot (lbf·ft) = 1.3558179483 newton metres.
- Newton metres to foot-pounds: divide by 1.3558179483, or multiply by about 0.737562.
- Foot-pounds to newton metres: multiply by 1.3558179483.
Both units measure torque, a turning force: a force acting at a distance. A newton metre is one newton at one metre, and a foot-pound is one pound of force at one foot. NIST’s conversion table lists the pound-force foot as 1.355 818 N·m.
| Newton metres (N·m) | Foot-pounds (lbf·ft) |
|---|---|
| 1 | 0.738 |
| 5 | 3.688 |
| 10 | 7.376 |
| 20 | 14.751 |
| 25 | 18.439 |
| 40 | 29.502 |
| 50 | 36.878 |
| 60 | 44.254 |
| 80 | 59.005 |
| 100 | 73.756 |
| 150 | 110.634 |
| 200 | 147.512 |
| 300 | 221.269 |
| 500 | 368.781 |
Worked examples
- 100 nm ÷ 1.3558179483 ≈ 73.756 lbfft
- 50 nm ÷ 1.3558179483 ≈ 36.878 lbfft
- 25 nm ÷ 1.3558179483 ≈ 18.439 lbfft
- 200 nm ÷ 1.3558179483 ≈ 147.512 lbfft
- 10 nm ÷ 1.3558179483 ≈ 7.376 lbfft
Going from foot-pounds to newton metres:
| Foot-pounds (lbf·ft) | Newton metres (N·m) |
|---|---|
| 1 | 1.356 |
| 10 | 13.558 |
| 15 | 20.337 |
| 25 | 33.895 |
| 30 | 40.675 |
| 50 | 67.791 |
| 80 | 108.465 |
| 100 | 135.582 |
| 150 | 203.373 |
| 250 | 338.954 |
Where the number comes from
The factor is built from the definitions of the units. A pound-force is the weight of a one-pound mass under standard gravity: 0.45359237 kg × 9.80665 m/s² = 4.4482216152605 newtons. A foot is 0.3048 metres. Multiplying, one foot-pound of torque is 4.4482216152605 × 0.3048 = 1.3558179483314 N·m. NIST’s table gives the same figure rounded to seven digits.
Torque and energy share a unit name
A foot-pound can also mean a unit of energy or work, the foot-pound-force, which NIST lists as 1.355 818 joules. The number is the same because a newton metre and a joule are the same dimension, but they describe different things. Torque is a force times the length of the lever. Energy is a force acting over a distance. This page is for torque, such as the setting on a torque wrench, and the unit is properly written lbf·ft or lb-ft to avoid the confusion.
The torque unit is not the same as the inch-pound. There are 12 inches in a foot, so 1 lbf·ft is 12 lbf·in. For that conversion use inch-pounds to foot-pounds.
Doing it in your head
For a quick answer from newton metres, multiply by 3 and divide by 4: 100 N·m is about 75 lbf·ft, and the exact figure is 73.756. Better, multiply by 0.74. From foot-pounds, multiply by 1.36 or add a third: 50 lbf·ft is 50 plus 17 is about 67, and the exact figure is 67.791.
Common mistakes
- Confusing the foot-pound with the inch-pound. They differ by a factor of 12. A torque wrench set in inch-pounds should not be read as foot-pounds.
- Using kilograms for force. A kilogram-force metre is a different unit again, 9.80665 N·m. This page converts newton metres.
- Reading the unit as energy. A joule and a newton metre have the same dimension, but a torque is not a quantity of energy.
- Multiplying when you should divide. A foot-pound is a bigger torque than a newton metre, so a figure in foot-pounds is smaller than the same figure in newton metres.
Related conversions
- Inch-pounds to foot-pounds, divide by 12.
- Horsepower from torque and rpm: the engine horsepower calculator.
- Every other unit of torque, speed, length and mass: the unit converter.
How it is calculated
Each torque unit is stored as an exact number of newton metres: a pound-force foot as 1.3558179483314004. The converter multiplies by the starting unit’s factor and divides by the target unit’s, in 40-digit decimal arithmetic. Only the number on screen is rounded.
Frequently asked questions
How do I convert newton metres to foot-pounds?
Divide the newton metres by 1.3558179483, or multiply by 0.737562. 100 N·m is 73.756 lbf·ft.
How many newton metres is one foot-pound?
One pound-force foot is 1.3558179483 newton metres, usually rounded to 1.3558 or 1.356.
How do I convert foot-pounds to newton metres?
Multiply the foot-pounds by 1.3558179483. 50 lbf·ft is 67.791 N·m, and 100 lbf·ft is 135.582 N·m.
Is a foot-pound of torque the same as a foot-pound of energy?
The number is the same in SI terms, 1.3558 N·m or 1.3558 J, but they measure different things. Torque is force at a distance from a pivot. Energy is force over a distance moved.
How many foot-pounds in an inch-pound?
One inch-pound is one twelfth of a foot-pound, 0.0833 lbf·ft. 120 lbf·in is 10 lbf·ft.
Where does 1.3558 come from?
A pound-force is 0.45359237 kg × 9.80665 m/s² = 4.4482216 newtons, and a foot is 0.3048 m, so a foot-pound is 4.4482216 × 0.3048 = 1.3558179 newton metres.
Related calculators
- Engine Horsepower CalculatorEnter the torque and the engine speed to get the power, or the power and speed to get the torque.
- Inch-Pounds to Foot-Pounds ConverterEnter a torque and convert it.
- Feet to Meters ConverterEnter a length in feet and read it in metres.
- Weight ConverterConvert any weight.
- Unit ConverterPick what you are converting, enter a value, choose the two units, and read the answer.
- Acceleration ConverterConvert any acceleration.