Skip to content
thecalculatorstudio

Inch-Pounds to Foot-Pounds Converter (Torque)

Enter a torque and convert it. There are exactly 12 inch-pounds in a foot-pound, and the metric conversions follow from the exact definition of the pound-force.

Last reviewed

To

50

50 lbf·ft, and 1 lbf·in = 0.083333333 lbf·ft

Common conversions

The one number to remember

There are 12 inch-pounds in a foot-pound. That is all the arithmetic there is between the two units, because there are 12 inches in a foot.

  • Inch-pounds to foot-pounds: divide by 12.
  • Foot-pounds to inch-pounds: multiply by 12.
Inch-pounds Foot-pounds
60 5
120 10
250 20.8333
600 50
1,200 100
1,800 150

What torque is

Torque is a twisting force: how hard something is being turned. It is a force acting at a distance from the axis, so it is measured in a force times a length. A pound-force at the end of a one-foot lever is one foot-pound of torque. The same pound-force at the end of a one-inch lever is one inch-pound.

That is why the two units differ by exactly 12, and why the metric equivalents follow so neatly from the pound-force and the metre.

Converting to newton metres

Here are the factors, which NIST lists in its conversion tables:

Unit Newton metres
1 pound-force foot (lbf·ft) 1.355818
1 pound-force inch (lbf·in) 0.1129848
1 ounce-force inch (ozf·in) 0.007061552
1 kilogram-force metre (kgf·m) 9.80665

They are exact once you know the pound-force, which is the pound-mass of 0.45359237 kg times standard gravity, 9.80665 m/s²: 4.4482216152605 newtons. Times 0.3048 m for a foot gives 1.3558179483314004 N·m. The converter uses those exact values, so a round trip returns the number you started with.

Examples

  • 600 in·lb = 50 ft·lb = 67.7909 N·m
  • 150 ft·lb = 1,800 in·lb = 203.3727 N·m
  • 100 ft·lb = 1,200 in·lb = 135.582 N·m
  • 100 N·m = 73.7562 ft·lb = 885.075 in·lb

Reading a torque wrench

Most torque wrenches are marked in one unit, sometimes with a second scale beside it. Fastener specifications may be in either, and may be in newton metres.

  1. Check the unit on the specification and the unit on the wrench.
  2. Convert the specification to the wrench’s unit, in this converter.
  3. Set the wrench, and check it is set to the right number and not a decimal place out.

A torque of 85 ft·lb, for instance, is 1,020 in·lb or 115.245 N·m. Setting 85 on an inch-pound wrench would give you a twelfth of the intended torque.

Foot-pounds of torque and of energy

The foot-pound has a second life as a unit of energy and work, usually written ft·lbf: the work done by a pound-force acting through a foot. Its size is the same, 1.355818 in SI units, where the SI unit is the joule. NIST lists both, with the torque unit as the pound-force foot and the energy unit as the foot pound-force.

They share a number but not a meaning. Torque is a twist, and energy is an amount of work. A torque wrench reading in foot-pounds is measuring the first. A muzzle energy or a lifting job in foot-pounds is the second. Do not mix them in a formula.

Other torque units

Unit Symbol In N·m
Newton metre N·m 1
Newton centimetre N·cm 0.01
Kilogram-force metre kgf·m 9.80665
Kilogram-force centimetre kgf·cm 0.0980665
Pound-force foot lbf·ft 1.3558179483314004
Pound-force inch lbf·in 0.1129848290276167
Ounce-force inch ozf·in 0.00706155181422604375

Common mistakes

  • Dividing by 12 the wrong way round. Inch-pounds are the smaller unit, so the number of foot-pounds is smaller.
  • Mixing up torque and energy. The units look the same.
  • Using a mass pound for a force. The pound-force is the one in torque. The converter uses it throughout.
  • Rounding too early. Convert once, from the exact figure, and round the answer.

For other conversions, see the weight converter, the length converter or the acceleration converter.

Where torque figures appear

Torque specifications turn up in car and bicycle maintenance, in machinery and assembly, and in construction. The number is a target for tightening: too little and a fastener can work loose, too much and it can stretch or strip. When a manual gives a value in one unit and your wrench is in another, convert first and set the wrench to the converted figure. If the specification gives a range, convert both ends.

How it is calculated

Each unit is stored as a multiple of one newton metre. A conversion multiplies by the factor of the starting unit and divides by the factor of the target unit, with a single division at the end, in 40-digit decimal arithmetic. The imperial factors are exact because the pound and inch are defined in kilograms and metres, and the metric force is defined from standard gravity.

Frequently asked questions

How do I convert inch-pounds to foot-pounds?

Divide by 12, because there are 12 inches in a foot. 600 inch-pounds is 50 foot-pounds, and 250 inch-pounds is 20.8333 foot-pounds.

How do I convert foot-pounds to inch-pounds?

Multiply by 12. 150 foot-pounds is 1,800 inch-pounds, and 50 foot-pounds is 600 inch-pounds.

How many newton metres is a foot-pound?

1.355818 N·m, according to NIST. One pound-force foot is exactly 1.3558179483314004 N·m. So 100 ft·lb is 135.582 N·m, and 100 N·m is 73.7562 ft·lb.

How many newton metres is an inch-pound?

0.1129848 N·m, a twelfth of a foot-pound. 600 in·lb is 67.7909 N·m. NIST lists the figure as 1.129 848 × 10⁻¹.

Is a foot-pound of torque the same as a foot-pound of energy?

They have the same size, 1.355818 in SI units, but they are different things. Torque is a twisting force, written lbf·ft, and energy is work done, written ft·lbf, with joules as its SI unit. A torque wrench measures torque.

Why do some wrenches read in inch-pounds?

Small fasteners need small torques, and a scale in inch-pounds has finer divisions than one in foot-pounds. Use the scale your wrench is graduated in, and divide by 12 if a specification is given in the other unit.

Related calculators

Sources