Skip to content
thecalculatorstudio

Acceleration Converter: g, m/s², ft/s² and more

Convert any acceleration. Standard gravity is defined as exactly 9.80665 m/s², so every conversion to and from g is exact.

Last reviewed

To

9.80665

9.80665 m/s², and 1 g = 9.80665 m/s²

Common conversions

The conversions people need

From To Multiply by Example
g m/s² 9.80665 4 g = 39.2266 m/s²
m/s² g 0.101972 20 m/s² = 2.0394 g
g ft/s² 32.174049 1 g = 32.174 ft/s²
ft/s² m/s² 0.3048 32 ft/s² = 9.7536 m/s²
mph/s m/s² 0.44704 10 mph/s = 4.4704 m/s²
g Gal 980.665 0.5 g = 490.33 Gal
g mph/s 21.936851 0.5 g = 10.97 mph/s

What acceleration is

Acceleration is how quickly speed changes. If a car goes from standing to 27 metres per second (about 60 mph) in 3 seconds, its speed is rising by about 9 metres per second every second, which is written 9 m/s². The unit is a speed divided by a time, which is why it carries the “per second squared”.

The SI unit is metres per second squared (m/s²). Other units appear in particular fields: feet per second squared in US engineering, miles per hour per second in car testing, Gal in geophysics, and g wherever people want to relate a force to everyday weight.

Standard gravity is exact

One g is the acceleration of gravity at the Earth’s surface, as a convention: 9.80665 m/s², exactly. It is a definition, not a measurement. NIST lists it as the standard acceleration of free fall in its conversion tables.

That has two consequences:

  • Conversions to and from g are exact, with no rounding in the factor.
  • The real pull of gravity varies a little with latitude and altitude. “1 g” means the standard value, not the local one.

In feet, 1 g is 32.174049 ft/s². The familiar 32.2 is that number rounded.

A worked example: 0 to 60 mph

A car takes 3.0 seconds to reach 60 mph.

  • 60 mph is 60 × 0.44704 = 26.8224 m/s.
  • Divided by 3 seconds: 8.9408 m/s².
  • In g: 8.9408 ÷ 9.80665 = 0.9117 g.

If it takes 6 seconds, the figure is 10 mph per second, which is 4.4704 m/s² and 0.4559 g. Doubling the time halves the acceleration.

This is an average over the whole run. A real car accelerates harder at low speed and less at high speed, so the figure at any moment differs.

Where you see g

  • Cars and motorbikes. Hard braking and cornering are described in g. Braking at 0.8 g is 7.845 m/s².
  • Aircraft and rides. A pilot or rider pulling 4 g feels four times their normal weight, which is 39.2266 m/s².
  • Earthquakes. Ground motion is often given as peak ground acceleration in g, or in Gal. A peak of 0.3 g is 2.941995 m/s², or 294.2 Gal.
  • Shipping and electronics. Shock ratings for equipment are stated in g.

Units of acceleration

Unit Symbol In m/s²
Metre per second squared m/s² 1
Centimetre per second squared cm/s² 0.01
Galileo Gal 0.01
Kilometre per hour per second km/h/s 0.27778 (1000 ÷ 3600)
Standard gravity g 9.80665
Foot per second squared ft/s² 0.3048
Inch per second squared in/s² 0.0254
Mile per hour per second mph/s 0.44704

The imperial figures are exact because the inch, foot and mile are defined in metres. The km/h/s figure is a fraction, 1000 ÷ 3600, so the converter keeps it as a fraction to avoid a repeating decimal.

Mistakes to avoid

  • Confusing speed and acceleration. 60 mph is a speed. Acceleration is how fast it changes.
  • Using weight for g. One g is an acceleration. A person’s weight is a force, and how many g they feel depends on the acceleration they are subject to.
  • Forgetting the square. m/s² is not m/s. Converting an acceleration with a speed factor gives the wrong answer.
  • Rounding g to 10. It is convenient for estimates, but it is 2% high.

For speed conversions, use the speed converter. For torque, the other unit that mixes forces and lengths, see the inch-pounds to foot-pounds converter. For lengths, the length converter.

How it is calculated

Every unit is stored as a multiple of one metre per second squared, written as an exact decimal or fraction. A conversion multiplies by the factor of the unit you start from and divides by the factor of the unit you end at, with one division at the very end, in 40-digit decimal arithmetic. Results are rounded for display only.

Frequently asked questions

How many m/s² is 1 g?

Exactly 9.80665. That is the value of standard gravity, fixed by definition, which NIST lists as the standard acceleration of free fall. So 4 g is 39.2266 m/s² and 0.3 g is 2.941995 m/s².

How many ft/s² is 1 g?

32.174049 ft/s². It comes from dividing 9.80665 by 0.3048, the exact number of metres in a foot. The round figure 32.2 is fine for rough work.

What is a Gal?

A galileo, written Gal, is one centimetre per second squared, or 0.01 m/s². It is used in geophysics to describe small changes in gravity. Standard gravity is 980.665 Gal.

Is g-force the same as acceleration?

It is acceleration expressed as a multiple of standard gravity. A car speeding up at 8.94 m/s² is accelerating at 0.91 g. The symbol g is also used for the gram, but the context makes it clear which is meant.

How do I turn 0 to 60 mph in 3 seconds into g?

60 mph is 26.8224 m/s, and dividing by 3 seconds gives 8.9408 m/s², which is 0.9117 g. Averaged over the run, that is a little under one g.

What is mph per second?

The rate at which speed in miles per hour changes each second. One mph/s is exactly 0.44704 m/s², and standard gravity is 21.936851 mph/s.

Related calculators

Sources