Feet (ft) to Metres (m) Converter
Enter a length in feet and read it in metres. A foot is exactly 0.3048 metres.
Last reviewed
To
3.048 m, and 1 ft = 0.3048 m
Common conversions
The conversion
1 foot = 0.3048 metres.
- Feet to metres: multiply by 0.3048.
- Metres to feet: divide by 0.3048, or multiply by about 3.28084.
The 0.3048 is exact. It is the definition of the international foot, not a rounded value.
| Feet (ft) | Metres (m) |
|---|---|
| 1 | 0.3048 |
| 2 | 0.6096 |
| 3 | 0.9144 |
| 5 | 1.524 |
| 6 | 1.8288 |
| 8 | 2.4384 |
| 10 | 3.048 |
| 12 | 3.6576 |
| 20 | 6.096 |
| 25 | 7.62 |
| 50 | 15.24 |
| 100 | 30.48 |
| 328.084 | 100 |
Worked examples
- 10 ft × 0.3048 = 3.048 m
- 6 ft × 0.3048 = 1.8288 m
- 5.5 ft × 0.3048 = 1.6764 m
- 100 ft × 0.3048 = 30.48 m
- 0.5 ft × 0.3048 = 0.1524 m
Going the other way, divide by 0.3048. 100 metres is 328.084 feet, so the “328.084” row of the table is almost exactly 100 metres.
| Metres (m) | Feet (ft) |
|---|---|
| 1 | 3.2808 |
| 2 | 6.5617 |
| 5 | 16.4042 |
| 10 | 32.8084 |
| 20 | 65.6168 |
| 50 | 164.042 |
| 100 | 328.084 |
Where the number comes from
The metre is the SI unit of length. The international foot is defined from it, as exactly 0.3048 m. NIST traces that to an agreement reached in 1958 between the English-speaking nations, put into effect on 1 July 1959, which fixed the yard at exactly 0.9144 m and the inch at exactly 25.4 mm. A foot is a third of a yard, and 0.9144 ÷ 3 = 0.3048.
NIST’s conversion table gives the same figure for the foot, 3.048 × 10⁻¹ m.
The US survey foot
There is a second, slightly longer foot: the US survey foot, which NIST lists at about 0.3048006 m. It differs from the international foot by about two parts per million, which is around 3 millimetres over a mile. For a room, a height or a delivery it makes no difference at all. It matters only for large survey coordinates, where the surveyor’s documents say which foot they use. This converter uses the international foot of exactly 0.3048 m.
Doing it in your head
For a rough answer, take about a third of the number of feet and then take off a little, because 0.3048 is just under 0.3333. 30 feet: a third is 10, and the exact figure is 9.144 m. Multiplying by 0.3 and adding 1.6% is closer: 30 × 0.3 = 9, plus 0.144 is 9.144. To go the other way, multiply metres by 3 and add about 10%: 10 m is 30 plus 3.3 = about 33 feet, and the exact figure is 32.81 feet.
Common mistakes
- Using 0.3 for a precise job. It is 1.6% too small. For anything you will cut, order or pay for, use 0.3048.
- Multiplying when you should divide. A metre is longer than a foot, so a length has fewer metres than feet.
- Mixing up feet and square feet. For area the factor is 0.3048² = 0.09290304 square metres per square foot. Use the area converter.
- Reading 5.5 feet as 5 feet 5 inches. 5.5 feet is 5 feet 6 inches.
Related conversions
- Metres to feet and inches, for a height in the form 5 ft 9 in.
- Feet to inches, multiply by 12.
- Any other length: the length converter.
- A person’s height: the height converter.
How it is calculated
Each length unit is stored as an exact number of metres, a foot as 0.3048. The converter multiplies by the starting unit’s factor and divides by the target unit’s, in 40-digit decimal arithmetic, so feet to metres is the input times exactly 0.3048. Only the number on screen is rounded.
Frequently asked questions
How many metres are in a foot?
Exactly 0.3048. One foot is 0.3048 metres, so 10 feet is 3.048 metres.
How do I convert feet to metres?
Multiply the feet by 0.3048. 6 feet × 0.3048 = 1.8288 metres, and 100 feet is 30.48 metres.
How do I convert metres to feet?
Divide by 0.3048, or multiply by about 3.28084. 10 metres is 32.8084 feet, and 1 metre is 3.2808 feet.
Is 0.3048 exact?
Yes. The international foot is defined as exactly 0.3048 metres, from the yard of exactly 0.9144 metres. The figure is not a rounded measurement.
What is the US survey foot?
A foot of about 0.3048006 metres, used in some land surveying. It is about two parts per million longer than the international foot, roughly 3 millimetres over a mile, so it does not affect everyday conversions.
Is 3.28 an accurate way to turn metres into feet?
It is close, but 3.28 is about 0.03% too small. The exact figure is 3.28084 feet per metre, so 100 metres is 328.084 feet and not 328.
Related calculators
- Meters to Feet and Inches ConverterEnter a length in metres and read it in feet and inches, or switch to enter feet and inches and read metres.
- Feet to Inches ConverterEnter a length in feet and read it in inches.
- Length ConverterConvert any length or distance.
- Height ConverterEnter a height in centimetres, metres, or feet and inches.
- Area ConverterConvert any area.
- Unit ConverterPick what you are converting, enter a value, choose the two units, and read the answer.