Skip to content
thecalculatorstudio

Metres (m) to Feet and Inches Converter

Enter a length in metres and read it in feet and inches, or switch to enter feet and inches and read metres. An inch is exactly 0.0254 metres.

Last reviewed

m

Length in feet and inches

5 ft 8.9 in

nearest sixteenth: 5 ft 8 7/8 in

Metres
1.7500 m
Centimetres
175.00 cm
Total inches
68.90 in
Decimal feet
5.7415 ft
Feet and inches
5 ft 8.9 in
Nearest sixteenth
5 ft 8 7/8 in

One inch is exactly 0.0254 metres, and there are 12 inches in a foot. Nothing is rounded until the answer is shown.

The conversion

An inch is exactly 0.0254 metres and a foot is 12 inches, so a foot is exactly 0.3048 metres. To turn metres into feet and inches:

  1. Divide the metres by 0.0254 to get total inches.
  2. Divide the total inches by 12. The whole number is the feet, and the remainder is the inches.

For 1.75 m: 1.75 ÷ 0.0254 = 68.8976 inches. 68.8976 ÷ 12 = 5 with 8.8976 left over, so 5 feet 8.9 inches. Read to the nearest sixteenth of an inch, that is 5 feet 8 7/8 inches.

Metres Feet and inches Nearest sixteenth Decimal feet
0.5 1 ft 7.7 in 1 ft 7 11/16 in 1.6404
1 3 ft 3.4 in 3 ft 3 3/8 in 3.2808
1.5 4 ft 11.1 in 4 ft 11 1/16 in 4.9213
1.6 5 ft 3 in 5 ft 3 in 5.2493
1.7 5 ft 6.9 in 5 ft 6 15/16 in 5.5774
1.75 5 ft 8.9 in 5 ft 8 7/8 in 5.7415
1.8 5 ft 10.9 in 5 ft 10 7/8 in 5.9055
1.9 6 ft 2.8 in 6 ft 2 13/16 in 6.2336
2 6 ft 6.7 in 6 ft 6 3/4 in 6.5617
2.5 8 ft 2.4 in 8 ft 2 7/16 in 8.2021
3 9 ft 10.1 in 9 ft 10 1/8 in 9.8425
5 16 ft 4.9 in 16 ft 4 7/8 in 16.4042
10 32 ft 9.7 in 32 ft 9 11/16 in 32.8084

Why not just use decimal feet?

Multiplying metres by 3.28084 gives feet as a decimal, and that is the “Decimal feet” column. 1.75 m is 5.7415 feet. The mistake is to read this as “5 feet 7.4 inches” or “5 feet 74 inches”. The part after the point is a fraction of a foot, so multiply it by 12: 0.7415 × 12 = 8.898, which is 8.9 inches. That is why 1.75 m is 5 feet 8.9 inches, not 5 feet 7.4 inches.

The converter does the multiplication for you and shows both forms.

Carrying into the next foot

When the inches round up to 12, the answer carries into the next foot. 1.8287 m is 71.9961 inches, which is 5 feet 11.9961 inches. Rounded to one decimal that would be “5 feet 12.0 inches”, which is not how a length is written, so the converter shows 6 feet 0 inches. The nearest-sixteenth reading is carried the same way.

Feet and inches to metres

Going the other way, turn the feet and inches into inches and multiply by 0.0254: (12 × feet + inches) × 0.0254.

For 5 feet 9 inches: 5 × 12 + 9 = 69 inches, and 69 × 0.0254 = 1.7526 m. This direction is exact, with no rounding until the answer is displayed.

Feet and inches Metres
5 ft 0 in 1.524
5 ft 3 in 1.6002
5 ft 6 in 1.6764
5 ft 9 in 1.7526
5 ft 10 in 1.778
5 ft 11 in 1.8034
6 ft 0 in 1.8288
6 ft 2 in 1.8796
6 ft 4 in 1.9304

Rounding to the inch

Heights are usually quoted to the whole inch. 1.8 m is 70.8661 inches, which is 5 feet 10.9 inches. To the nearest inch that is 5 feet 11 inches. The converter shows one decimal place, and the nearest sixteenth, so you can round whichever way the form or the tape asks for. Rounding too early is the main way a conversion goes wrong: 1.8 m is 5 feet 10.9 inches, and an answer of “5 feet 10 inches” is nearly an inch short.

Doing it in your head

One metre is 39.37 inches, which is 3 feet 3 3/8 inches. So 2 m is 6 feet 6 3/4 inches and 3 m is 9 feet 10 1/8 inches. The rough rule “about 3 feet 3 inches to the metre” is only three eighths of an inch short per metre.

Common mistakes

  • Reading decimal feet as feet and inches. 5.74 feet is not 5 feet 74 inches, and not 5 feet 7.4 inches. Multiply the decimal part by 12.
  • Rounding the inches before carrying. 71.99 inches is 6 feet 0 inches. It is never 5 feet 12 inches.
  • Dividing by 0.3048 and stopping. That gives decimal feet. You still have to split it into feet and inches.
  • Using 2.54 for metres. 2.54 converts inches to centimetres. For metres the inch is 0.0254.

How it is calculated

An inch is stored as exactly 0.0254 metres. Metres are divided by 0.0254 to give total inches in 40-digit decimal arithmetic. The total is split into whole feet and the remainder, which is rounded to one decimal place (and separately to the nearest sixteenth) and carried into the next foot if it reaches 12. Going the other way, (12 × feet + inches) × 0.0254 gives metres exactly. Only the numbers shown are rounded.

Frequently asked questions

How do I convert metres to feet and inches?

Divide the metres by 0.0254 to get inches, then divide by 12. The whole number is the feet and the remainder is the inches. 1.75 m is 68.8976 inches, which is 5 feet 8.9 inches.

How many feet and inches is 1 metre?

3 feet 3.4 inches, which is 39.3701 inches. To the nearest sixteenth of an inch that is 3 feet 3 3/8 inches.

How tall is 1.8 m in feet and inches?

5 feet 10.9 inches, or about 5 feet 11 inches. 1.8 m is 70.8661 inches.

How do I convert feet and inches to metres?

Turn the feet and inches into inches, then multiply by 0.0254. 5 feet 9 inches is 69 inches, and 69 × 0.0254 = 1.7526 metres.

Is 5.74 feet the same as 5 feet 7.4 inches?

No. The digits after the decimal point are a fraction of a foot. 0.74 foot × 12 is about 8.9 inches, so 5.74 feet is about 5 feet 8.9 inches.

Why does the answer never show 12 inches?

When the inches round up to 12 the converter carries one foot instead, so 71.996 inches is shown as 6 feet 0 inches and not 5 feet 12 inches.

Related calculators

Sources