Inches (in) to Feet (ft) Converter
Enter a length in inches and read it in feet. Divide by 12: a foot is exactly 12 inches.
Last reviewed
To
6 ft, and 1 in = 0.083333333 ft
Common conversions
The conversion
12 inches = 1 foot.
- Inches to feet: divide by 12.
- Feet to inches: multiply by 12.
Dividing by 12 gives feet as a decimal. When the inches do not divide evenly, the decimal does not end: 100 inches is 8.3333… feet. Most people would rather read it as feet and inches, which is the other way to write the same length.
| Inches (in) | Feet (ft) |
|---|---|
| 1 | 0.0833 |
| 3 | 0.25 |
| 6 | 0.5 |
| 9 | 0.75 |
| 12 | 1 |
| 18 | 1.5 |
| 24 | 2 |
| 30 | 2.5 |
| 36 | 3 |
| 48 | 4 |
| 60 | 5 |
| 72 | 6 |
| 84 | 7 |
| 96 | 8 |
| 100 | 8.3333 |
| 120 | 10 |
As feet and inches
To turn a number of inches into feet and inches, divide by 12. The whole part is the feet and the remainder is the inches left over.
- 100 inches: 100 ÷ 12 = 8 remainder 4, so 8 feet 4 inches (8.3333 feet).
- 66 inches: 66 ÷ 12 = 5 remainder 6, so 5 feet 6 inches (5.5 feet).
- 30 inches: 2 remainder 6, so 2 feet 6 inches (2.5 feet).
- 5 inches: less than 12, so 0 feet 5 inches (0.4167 feet).
Decimal feet and feet-and-inches are two spellings of one length. 8.3333 feet and 8 feet 4 inches are the same, and the converter shows the decimal. The remainder method gives the other.
Worked examples
- 72 in ÷ 12 (× 0.083333…) = 6 ft
- 30 in ÷ 12 (× 0.083333…) = 2.5 ft
- 100 in ÷ 12 (× 0.083333…) ≈ 8.3333 ft
- 5 in ÷ 12 (× 0.083333…) ≈ 0.4167 ft
- 66 in ÷ 12 (× 0.083333…) = 5.5 ft
The decimal feet for 100 inches repeats forever (8.33333…), which is why the converter rounds the figure it displays. The stored value is exact to 40 digits.
Why it is divide by 12
A foot is 12 inches, so a length measured in inches is 12 times as large a number as the same length measured in feet. Going to the bigger unit shrinks the number. A useful check: your answer in feet should be a good deal smaller than the number of inches you started with. If 72 inches came out as 864, the sum has been done upside down.
The relation is exact. A foot is 0.3048 metres and an inch 0.0254 metres, both exact since the metric definition of the inch took effect on 1 July 1959 (NIST), and 0.3048 ÷ 0.0254 = 12.
Reading a tape measure
A tape is marked in sixteenths of an inch. To use a reading in feet, turn the fraction into a decimal first: 3/16 is 0.1875, 1/4 is 0.25, 1/2 is 0.5 and 3/4 is 0.75. A reading of 41 and 3/4 inches is 41.75 inches, which is 41.75 ÷ 12 = 501 feet, or 3 feet 5 and 3/4 inches. The remainder method is easier on site, because it keeps whole inches and fractions together.
Common mistakes
- Multiplying instead of dividing. A foot is the larger unit, so there are fewer feet than inches.
- Reading 8.33 feet as 8 feet 33 inches. The decimal is a fraction of a foot. Multiply it by 12 for the inches: 0.33 × 12 is about 4.
- Using 12 for areas. 144 square inches make a square foot, because 12 × 12 = 144.
- Stopping at a rounded decimal. For a cut or an order, use feet and inches or the exact inches, not 8.33 feet.
Related conversions
- Feet to inches, the same factor in the other direction.
- Millimetres to inches, for metric sizes.
- Any other length: the length converter.
- A person’s height in centimetres or feet and inches: the height converter.
How it is calculated
Each length unit is stored as an exact number of metres: an inch as 0.0254 and a foot as 0.3048. The converter multiplies by the starting unit’s factor and divides by the target unit’s, in 40-digit decimal arithmetic, so inches to feet is the input divided by exactly 12. Only the displayed number is rounded.
Frequently asked questions
How do I convert inches to feet?
Divide the inches by 12. 72 inches ÷ 12 = 6 feet, and 100 inches ÷ 12 = 8.3333 feet.
How many feet is 100 inches?
8.3333 feet, which is 8 feet 4 inches. The decimal repeats, so 100 ÷ 12 = 8.3333… feet.
How do I write inches as feet and inches?
Divide by 12. The whole number is the feet and the remainder is the inches. 66 inches is 5 remainder 6, so 5 feet 6 inches.
What is 8.33 feet in feet and inches?
The 0.33 is a fraction of a foot. 0.33 × 12 is about 4 inches, so 8.33 feet is about 8 feet 4 inches. Do not read it as 8 feet 33 inches.
How many feet are in an inch?
One inch is 1 ÷ 12 = 0.083333 feet, or 0.083333… feet.
Is the conversion exact?
Yes. A foot is exactly 12 inches. The decimal can repeat, as 8.3333… does, but the relation itself is exact.
Related calculators
- Feet to Inches ConverterEnter a length in feet and read it in inches.
- Millimeters to Inches ConverterEnter a length in millimetres and read it in inches.
- Length ConverterConvert any length or distance.
- Height ConverterEnter a height in centimetres, metres, or feet and inches.
- Unit ConverterPick what you are converting, enter a value, choose the two units, and read the answer.
- Square Footage CalculatorAdd each part of the room or plot as a shape, say whether it is added or taken away, and measure in feet, inches, yards, metres or centimetres.