Millimetres (mm) to Inches (in) Converter
Enter a length in millimetres and read it in inches. An inch is exactly 25.4 millimetres.
Last reviewed
To
3.9370079 in, and 1 mm = 0.039370079 in
Common conversions
The conversion
1 inch = 25.4 millimetres.
- Millimetres to inches: divide by 25.4, or multiply by about 0.0393701.
- Inches to millimetres: multiply by 25.4.
The 25.4 is exact. It is the definition of the inch.
| Millimetres (mm) | Inches (in) |
|---|---|
| 1 | 0.0394 |
| 2 | 0.0787 |
| 5 | 0.1969 |
| 6 | 0.2362 |
| 8 | 0.315 |
| 10 | 0.3937 |
| 12.7 | 0.5 |
| 19 | 0.748 |
| 20 | 0.7874 |
| 25.4 | 1 |
| 50 | 1.9685 |
| 100 | 3.937 |
| 150 | 5.9055 |
| 200 | 7.874 |
| 300 | 11.811 |
| 500 | 19.685 |
| 1,000 | 39.3701 |
Worked examples
- 100 mm ÷ 25.4 ≈ 3.937 in
- 25.4 mm ÷ 25.4 = 1 in
- 6 mm ÷ 25.4 ≈ 0.2362 in
- 210 mm ÷ 25.4 ≈ 8.2677 in
- 1,000 mm ÷ 25.4 ≈ 39.3701 in
Because 1 ÷ 25.4 repeats, most answers have more digits than are useful. The converter shows four decimal places. For an everyday length two or three are enough.
Fractions of an inch
Tape measures and drill bits divide the inch into halves, quarters, eighths and sixteenths. Each fraction is an exact number of millimetres, because 25.4 divided by a power of two ends:
| Inches (in) | Millimetres (mm) |
|---|---|
| 0.0625 | 1.5875 |
| 0.125 | 3.175 |
| 0.25 | 6.35 |
| 0.5 | 12.7 |
| 0.75 | 19.05 |
| 1 | 25.4 |
| 2 | 50.8 |
| 6 | 152.4 |
| 12 | 304.8 |
So 1/16 inch is 1.5875 mm, 1/8 inch is 3.175 mm, 1/4 inch is 6.35 mm and 1/2 inch is 12.7 mm. The first column is inches and the second is millimetres.
Where the number comes from
NIST records that in 1958 a conference of English-speaking nations agreed to define their units of length in terms of the metre, and that the new factors were announced in 1959: the inch is exactly 25.4 millimetres, effective 1 July 1959. The relation comes from the yard, set at exactly 0.9144 m, which divides into 36 inches of 0.0254 m, or 25.4 mm. Before that, the inch and the millimetre had no exact relation, and the American and British inches differed in the sixth decimal place.
Doing it in your head
For a quick figure, divide millimetres by 25 and add a little. 100 mm is about 4 inches, and the exact figure is 3.937. An easier landmark: 25.4 mm is one inch, so 250 mm is almost 10 inches (9.843) and 1,000 mm is just under 40 (39.37). To go the other way, multiply inches by 25 and add 1.6%: 6 inches is 150 mm plus 2.4, which is 152.4.
Common mistakes
- Dividing by 2.54. That is centimetres. Millimetres divide by 25.4.
- Reading 0.5 inches as 5 mm. Half an inch is exactly 12.7 mm.
- Rounding 25.4 to 25. That is a 1.6% error, which adds up over a long length.
- Reading a decimal inch as a fraction by eye. 0.125 inch is exactly 1/8 inch, but 0.3 inch is not 3/8 inch (that is 0.375). Convert the decimal itself.
Related conversions
- Inches to feet, divide by 12.
- Feet to inches, multiply by 12.
- Centimetres, metres, yards and miles: the length converter.
- All kinds of unit in one place: the unit converter.
Small parts and film
Millimetres are the natural unit for small parts, and many tools and fixings in an inch country are still sold in fractions of an inch.
- 35 mm film is 35 ÷ 25.4 = 1.378 inches wide.
- A 6 mm bolt is 0.2362 inches across, close to the 1/4 inch (0.25) size but not the same, so the thread will not match.
- A 10 mm spanner is 0.3937 inches, a little over 3/8 inch (0.375).
- A 25 mm pipe is 0.9843 inches, just under an inch, and 100 mm is 3.937 inches.
Because the metric and inch sizes are close but not equal, never swap a part by size alone. Use the nominal size and thread given by the maker.
How it is calculated
Each length unit is stored as an exact number of metres: a millimetre as 0.001 and an inch as 0.0254. The converter multiplies by the starting unit’s factor and divides by the target unit’s, in 40-digit decimal arithmetic, so millimetres to inches is the input divided by exactly 25.4. Only the number shown is rounded.
Frequently asked questions
How many millimetres are in an inch?
Exactly 25.4. One inch is 25.4 millimetres, or 2.54 centimetres.
How do I convert mm to inches?
Divide the millimetres by 25.4. 100 mm ÷ 25.4 = 3.937 inches, and 25.4 mm is exactly 1 inch.
How do I convert inches to mm?
Multiply the inches by 25.4. 6 inches × 25.4 = 152.4 mm, and half an inch is 12.7 mm.
How many inches is 10 mm?
0.3937 inches, a little under 0.4 inch. 10 mm is 1 centimetre, and 2.54 centimetres make an inch.
How many mm is 1/16 of an inch?
1.5875 mm. A sixteenth of 25.4 mm is exactly 1.5875 mm, an eighth is 3.175 mm and a quarter is 6.35 mm.
Is 25.4 exact?
Yes. The inch has been exactly 25.4 millimetres since 1 July 1959, when the metric definition took effect. It is not a rounded figure.
Related calculators
- Inches to Feet ConverterEnter a length in inches and read it in feet.
- Feet to Inches ConverterEnter a length in feet and read it in inches.
- Length ConverterConvert any length or distance.
- Unit ConverterPick what you are converting, enter a value, choose the two units, and read the answer.
- Height ConverterEnter a height in centimetres, metres, or feet and inches.
- Micrograms to Grams ConverterEnter an amount in micrograms and read it in grams.