Skip to content
thecalculatorstudio

Cubic Yards to Tons Converter (Concrete, Gravel, Asphalt)

A cubic yard is a volume, so its weight depends on the material. Pick the material, enter the cubic yards, and read the weight in short tons, metric tonnes and pounds.

Last reviewed

yd³

Weight in short tons

2.0227 short tons

1.8349 metric tonnes · 4,045.3 lb

Long tons (2,240 lb)
1.806 long tons
Density used
149.83 lb/ft³

Weight depends on the material, its moisture and how it is packed. This is an estimate for planning, and a supplier’s weight ticket governs the sale.

A cubic yard has no single weight

A cubic yard is a volume, and a ton is a weight. To convert one to the other you need the density of the material: weight = volume × density. A cubic yard of water, concrete and gravel weigh very different amounts, so no one factor works for all of them.

The calculator holds the yard exactly: 0.9144 m per yard, so a cubic yard is 0.764554857984 m³, or 27 cubic feet. It gives the answer in short tons (2,000 lb), metric tonnes (1,000 kg) and long tons (2,240 lb), and it works backwards from a weight to a volume for ordering.

Weight of a cubic yard of common materials

Material Density Pounds Short tons Metric tonnes
Water 1,000 kg/m³ 1,685.6 0.8428 0.7646
Concrete 2,400 kg/m³ 4,045.3 2.0227 1.8349
Granite 2,700 kg/m³ 4,551.0 2.2755 2.0643
Asphalt, compacted (low) 144 lb/ft³ 3,888.0 1.944 1.7636
Asphalt, compacted (high) 160 lb/ft³ 4,320.0 2.16 1.9595
Gravel or crushed stone, dry (low) 1,100 kg/m³ 1,854.1 0.9271 0.841
Gravel or crushed stone, dry (high) 1,750 kg/m³ 2,949.7 1.4749 1.338

Where the density comes from:

  • Concrete and granite are the values in OpenStax’s University Physics, Table 14.1.
  • Asphalt: the Pennsylvania Asphalt Pavement Association says a typical compacted mix is 144 to 160 lb/ft³ and uses 147 lb/ft³ in its tables, which is 1.9845 short tons per cubic yard. It also says to use the job mix formula for a real project.
  • Gravel and crushed stone: Penn State’s civil engineering notes give 1,100 to 1,750 kg/m³ for normal-weight dry-rodded aggregate. That is a wide range because stone, size and packing differ, so the calculator shows both ends. A supplier will know the weight of the particular stone you are buying.
  • Soil, sand and mulch are not listed because the sources checked give no reliable figure. Choose “Another material” and enter the density from your supplier.

Worked examples

  • 5 cubic yards of concrete: 5 × 4,045.34 = 20,226.7 lb, which is 10.113 short tons.
  • 10 cubic yards of gravel: 10 × 1,854.1 to 10 × 2,949.7 lb, which is 9.271 to 14.749 short tons. At the top of the range a truck carries the weight of a lot more stone than at the bottom, so ask the supplier.
  • 2 cubic yards of granite in metric tonnes: 2 × 764.554857984 × 2.7 = 4.1286 tonnes.
  • A custom material at 100 lb/ft³, 5 cubic yards: 5 × 27 × 100 = 13,500 lb, which is 6.75 short tons.
  • 10 short tons of concrete in cubic yards: 10 × 907.18474 kg ÷ (2,400 × 0.764554857984) = 4.944 cubic yards.

Short, long and metric tons

In the United States “ton” usually means the short ton of 2,000 pounds. The long ton of 2,240 pounds is used in the UK, and the metric tonne is 1,000 kg. The three differ by up to 12%, so check which is meant. For a cubic yard of concrete: 2.0227 short tons, 1.806 long tons, 1.8349 metric tonnes.

Common mistakes

  • Using one factor for every material. The weight per cubic yard changes with the material.
  • Mixing up tons. A short ton, a long ton and a tonne are different.
  • Forgetting moisture and packing. Wet or compacted material weighs more per yard than loose, dry material.
  • Treating the result as a delivery weight. A weight ticket governs the sale.
  • Ordering by volume without checking the load. A truck has a weight limit as well as a volume.

For the volumes of gravel, mulch or concrete that you need, use the gravel calculator, the mulch calculator and the cubic yards calculator. For weights of liquids see gallons to pounds. Other conversions: the volume converter and the weight converter.

How it is calculated

Volume in cubic metres is cubic yards × 0.764554857984. Mass in kilograms is that times the density in kg/m³, with densities given in lb/ft³ converted using 1 lb = 0.45359237 kg and 1 ft = 0.3048 m. Tons are the mass divided by 907.18474 kg (short), 1,000 kg (metric) or 1,016.0469088 kg (long). It all runs in 40-digit decimal arithmetic, and only the displayed figure is rounded.

Frequently asked questions

How many tons are in a cubic yard?

It depends on the material. A cubic yard of concrete is about 2.02 short tons, granite 2.28, water 0.84, and dry gravel or crushed stone 0.93 to 1.47. There is no single figure for every material.

How many tons is a cubic yard of gravel?

Between 0.93 and 1.47 short tons for dry material, using 1,100 to 1,750 kg/m³ for normal-weight dry-rodded aggregate. The range is wide because stone type, size and packing differ, so ask your supplier for the weight of the stone you are buying.

How do I convert cubic yards to tons?

Multiply the cubic yards by the weight of a cubic yard of the material. For concrete, 5 yd³ × 4,045.3 lb = 20,226.7 lb, which is 10.11 short tons. Divide pounds by 2,000 for short tons.

How many cubic yards are in a ton?

Divide the weight by the weight per cubic yard of the material. 10 short tons of concrete is about 4.94 cubic yards. The calculator has a tons to cubic yards setting that does this for you.

What is the difference between short tons, long tons and metric tonnes?

A short ton is 2,000 pounds, a long ton is 2,240 pounds and a metric tonne is 1,000 kg, about 2,204.6 pounds. In the United States "ton" normally means the short ton.

Why are soil, sand and mulch not listed?

The sources checked for this page do not give a reliable weight for them, and their weight changes a great deal with moisture. Choose "Another material" and enter the density from your supplier.

Related calculators

Sources