Skip to content
thecalculatorstudio

Horsepower Calculator: From Force and Speed or Motor Volts and Amps

Enter a force and a speed to find the power in horsepower, or a motor's voltage, current and efficiency to find its shaft horsepower. Results come in hp, PS and kW.

Last reviewed

Horsepower

2.6667 hp

1.9885 kW, or 1,988.53 watts

Mechanical horsepower (550 ft·lbf/s)
2.6667
Metric horsepower (PS)
2.7037
Electrical horsepower (746 W)
2.6656
Kilowatts
1.9885

Power is force times speed, so it is the rate at which the force does work. Use the force along the direction of travel.

What horsepower measures

Horsepower measures power, the rate at which work is done. A force that moves something at a speed does work at a rate of force times speed, which is the formula in the University Physics textbook from OpenStax:

Power = force × speed

In SI units the force is in newtons, the speed in metres per second and the result in watts. One mechanical horsepower is defined as 550 foot-pounds-force per second, which NIST gives as 745.6999 watts. Two other horsepowers are in use: the metric horsepower (PS), 75 kilogram-force metres per second, is 735.4988 W, and the electrical horsepower on motor plates is 746 W.

From force and speed

Convert the force to newtons and the speed to metres per second, multiply, and divide by 745.69987 to get horsepower.

Worked example. A winch pulls a load with a force of 200 lbf at 5 mph.

  • 200 lbf = 200 × 4.4482216 = 889.64 N, and 5 mph = 2.2352 m/s.
  • Power = 889.64 × 2.2352 = 1,988.5 W.
  • Horsepower = 1,988.5 ÷ 745.69987 = 2.6667 hp.

Check in the old units: 5 mph is 7.3333 ft/s, so 200 × 7.3333 = 1,466.7 ft·lbf/s, and 1,466.7 ÷ 550 = 2.6667 hp.

From an electric motor

A motor’s electrical input is the voltage times the current, with the power factor for AC and a factor of √3 for three phase. The shaft power is that input times the efficiency:

  • DC: P = V × I × efficiency.
  • Single phase AC: P = V × I × power factor × efficiency.
  • Three phase AC: P = √3 × V × I × power factor × efficiency.

The power factor is the cosine of the angle between voltage and current, as in the OpenStax treatment of AC power.

Worked examples.

  • Single phase, 230 V, 10 A, power factor 0.85, efficiency 80%. Input = 230 × 10 × 0.85 = 1,955 W. Shaft power = 1,955 × 0.80 = 1,564 W, which is 2.0974 hp.
  • Three phase, 400 V, 10 A, power factor 0.85, efficiency 90%. Shaft power = 1.7321 × 400 × 10 × 0.85 × 0.90 = 5,300 W, which is 7.1075 hp.
  • DC, 24 V, 20 A, efficiency 90%. Shaft power = 24 × 20 × 0.90 = 432 W, which is 0.5793 hp.

Conversions

Horsepower Watts Kilowatts
1 hp (mechanical) 745.6999 0.7457
1 PS (metric) 735.4988 0.7355
1 hp (electrical) 746 0.746
1 kW 1,000 1

One kilowatt is 1.3410 mechanical horsepower, and one mechanical horsepower is 1.0139 PS.

What to keep in mind

  • Use the force along the motion. A force at an angle counts only for the part along the direction of travel.
  • Plate ratings are outputs. A motor’s rated horsepower is what it delivers on the shaft, not what it draws.
  • Current changes with load. A motor draws less current at light load, so the horsepower you work out is the horsepower in use.
  • Torque and rpm are another route. For an engine, use the engine horsepower calculator.

Common mistakes

  • Treating electrical input as output. Multiply by the efficiency.
  • Forgetting the power factor on an AC motor.
  • Forgetting √3 on a three phase motor.
  • Mixing mass and force. A kilogram is a mass. Use kilograms-force or newtons for a force.
  • Mixing hp and PS. They differ by about 1.4%.

For other power units, see the power converter. To go from watts to current, use the watts to amps calculator, and for the running cost of a motor the electricity cost calculator.

How it is calculated

The calculation is exact decimal arithmetic. A mechanical horsepower is 550 × 0.3048 m × 4.4482216152605 N = 745.69987158227 W, and the results are shown to six significant figures.

Frequently asked questions

How do you calculate horsepower from force and speed?

Multiply the force by the speed to get power: P = F × v. In foot-pounds-force per second, divide by 550 to get horsepower. A force of 200 lbf moving at 7.33 ft/s, which is 5 mph, is 1,466.7 ÷ 550 = 2.67 hp.

How many watts is a horsepower?

A mechanical horsepower is 550 foot-pounds-force per second, which is 745.6999 watts. A metric horsepower (PS) is 735.4988 watts, and the electrical horsepower on motor plates is 746 watts.

How do you calculate the horsepower of an electric motor?

Multiply the voltage by the current, by the power factor for AC, and by √3 for three phase. That is the electrical input in watts. Multiply by the efficiency to get the shaft power, then divide by 745.7 to get horsepower.

Why does efficiency matter?

A motor does not turn all its electrical input into shaft power. The rest becomes heat. At 80% efficiency, a motor taking 1,955 watts delivers 1,564 watts to the shaft, so using the input as output overstates the horsepower by 25%.

What is the difference between hp and PS?

A mechanical horsepower is 745.6999 W and a metric horsepower is 735.4988 W, so 1 hp is about 1.0139 PS. Cars in Europe and Japan are often rated in PS, while the US uses hp.

How is this different from the engine horsepower calculator?

That calculator works from the torque and the rpm of an engine. This one works from a force and a speed, such as pulling a load, or from the electrical input of a motor.

Related calculators

Sources