Skip to content
thecalculatorstudio

Surface Area Calculator: Cube, Box, Sphere, Cylinder and Cone

Pick a shape and enter its size. You will see the total surface area, the volume, and the pieces that make up the surface, such as the curved side and the two ends of a cylinder.

Last reviewed

Surface area of the cylinder

87.9645943005

volume 62.8318530718

Total surface area
87.9645943005
Volume
62.8318530718
Curved side, 2πrh
62.8318530718
Two ends, 2πr²
25.1327412287

Lengths are in the unit you enter, surface area in its square and volume in its cube. The surface area of a cylinder or cone includes its flat ends.

Surface area and volume

The surface area of a solid is the total area of its outside, measured in square units. It answers questions like how much paint covers a box or how much material a can needs. The volume is the space inside, measured in cubic units, and it answers how much the shape holds. The page gives both for five common solids, and shows the pieces the surface is made of.

The formulas

Shape Surface area Volume
Cube, side a 6a² a³
Rectangular prism (box) l × w × h 2(lw + lh + wh) lwh
Sphere, radius r 4πr² (4/3)πr³
Cylinder, radius r, height h 2πr(r + h) = 2πrh + 2πr² πr²h
Cone, radius r, height h πr(r + s) = πrs + πr² πr²h ÷ 3

For the cone, s is the slant height, the distance from the tip down the side to the edge of the base: s = √(r² + h²). These formulas are the standard ones, set out in MathWorld’s entries for each solid.

Worked examples

A cube of side 3. Each face is 3 × 3 = 9. Six faces: 54. Volume 3³ = 27.

A box 2 × 3 × 4. Top and bottom: 2 × (2 × 3) = 12. Front and back: 2 × (2 × 4) = 16. Left and right: 2 × (3 × 4) = 24. Total 52. Volume 2 × 3 × 4 = 24.

A sphere of radius 3. Surface area 4π × 9 = 113.097335529. Volume (4/3)π × 27 = 113.097335529. These are the same number only at radius 3, because 4πr² = (4/3)πr³ when r = 3. The two measure different things, so the match is a coincidence of the numbers.

A cylinder of radius 2 and height 5. Curved side: 2π × 2 × 5 = 62.8318530718. Two ends: 2 × π × 4 = 25.1327412287. Total 87.9645943005. Volume π × 4 × 5 = 62.8318530718.

A cone of radius 3 and height 4. Slant height √(9 + 16) = 5. Curved side π × 3 × 5 = 47.1238898038. Base π × 9 = 28.2743338823. Total 75.3982236862. Volume π × 9 × 4 ÷ 3 = 37.6991118431.

Open shapes

The surface area here is the whole outside, including both ends of a cylinder and the base of a cone. Many real objects are open. A pipe has only the curved side, 2πrh. A can without a lid has the curved side plus one end, 2πrh + πr². A paper cone for a party hat has only the curved side, πrs. The results show these pieces separately, so you can add up the ones you need.

The units

Surface area is in square units and volume in cubic units: for a radius in centimetres, the area is in square centimetres and the volume in cubic centimetres. The two cannot be compared or added. To convert, use the area converter for the square and the volume converter for the cube. A factor that works for length must be squared for area and cubed for volume, so 1 metre being 100 cm means 1 square metre is 10,000 square centimetres.

How surface area and volume scale

If every length is doubled, the surface area is multiplied by 4 and the volume by 8. That is why small animals lose heat faster for their size, and why a cut-up block of ice melts faster than a whole one: a large number of small pieces has much more surface per unit of volume. For a cube of side 3, surface to volume is 54 ÷ 27 = 2. At a side of 6 it is 216 ÷ 216 = 1, half as much.

Common mistakes

  • Using the diameter for the radius. Every formula here uses the radius. Halve a diameter first.
  • Using the vertical height of a cone in the curved-side formula. The curved side uses the slant height s, not h.
  • Forgetting the ends of a cylinder. The total includes 2πr² for the two flat ends.
  • Mixing units. A length in feet and one in inches give a meaningless area. Convert first.
  • Confusing surface area with volume. One is in square units, the other in cubic units.

How it is calculated

The sizes are read as exact decimals. The formulas above are worked in 50-digit arithmetic, with π from the arccosine of −1 and the slant height from a square root. The pieces of the surface (faces, curved side, ends or base) are worked separately and added for the total. Every figure is shown to 12 significant digits.

Frequently asked questions

What is surface area?

The total area of the outside of a solid, in square units. For a box it is the area of all six faces added up. It is different from volume, which is the space inside, in cubic units.

What is the surface area of a cube?

Six times the area of one face: 6a². A cube of side 3 has faces of 9, so the surface area is 54, and its volume is 3³ = 27.

What is the surface area of a sphere?

4πr², which is four times the area of a circle with the same radius. For r = 3 it is 4π × 9 = 113.097. The volume is (4/3)πr³.

What is the surface area of a cylinder?

2πr(r + h): the curved side 2πrh plus the two circular ends 2πr². For r = 2 and h = 5 it is 62.83 + 25.13 = 87.96.

What is the surface area of a cone?

πr(r + s), where s is the slant height √(r² + h²). The curved side is πrs and the circular base is πr². For r = 3 and h = 4, s = 5 and the total is 75.40.

Is the surface area of a cylinder with open ends different?

Yes. This page includes both ends. For a pipe or an open can, use only the curved side 2πrh, shown separately in the results, and add one end, πr², for a can with a bottom.

Related calculators

Sources