Skip to content
thecalculatorstudio

Circle Calculator: Radius, Diameter, Circumference and Area

Choose what you know about the circle and enter it. You will see the radius, diameter, circumference and area, and the arc and sector for any central angle.

Last reviewed

degrees

Area

78.5398163397

radius 5 · circumference 31.4159265359

Radius
5
Diameter
10
Circumference
31.4159265359
Area
78.5398163397
Arc length at 90°
7.85398163397
Sector area at 90°
19.6349540849

d = 2r, C = 2πr, A = πr². Lengths are in the unit you entered and areas in its square. From a circumference r = C ÷ 2π; from an area r = √(A ÷ π).

The four measurements

A circle is described by one number. Give the radius (centre to edge), the diameter (across, through the centre), the circumference (the distance round) or the area (the space inside), and the other three follow. They are related by:

  • Diameter: d = 2r
  • Circumference: C = 2πr = πd
  • Area: A = πr²

where π (pi) is the constant 3.14159265358979…, the ratio of any circle’s circumference to its diameter. These formulas are in MathWorld’s entry on the circle.

Working backwards

The page lets you start from any of the four. Rearranging the formulas gives the radius each time:

You know Radius
Radius r r
Diameter d r = d ÷ 2
Circumference C r = C ÷ (2π)
Area A r = √(A ÷ π)

Once you have the radius, the rest follow from the three formulas.

Worked examples

From the radius. r = 5.

  • Diameter = 2 × 5 = 10
  • Circumference = 2 × π × 5 = 10π = 31.4159265359
  • Area = π × 5² = 25π = 78.5398163397

From the circumference. C = 10, for example a 10-unit length of string made into a circle. r = 10 ÷ (2π) = 1.59154943092, so d = 3.18309886184 and A = π × r² = 7.95774715459.

From the area. A = 100. r = √(100 ÷ π) = √31.8309886184 = 5.64189583548, d = 11.283791671, C = 35.4490770181.

From the diameter. d = 1 gives r = 0.5, C = π = 3.14159265359 and A = π ÷ 4 = 0.785398163397.

Arc length and sector area

A central angle cuts the circle into an arc (part of the circumference) and a sector (a slice, like a piece of pie). If the angle is θ degrees, the part of the circle is θ ÷ 360:

  • Arc length = C × θ ÷ 360
  • Sector area = A × θ ÷ 360

For r = 5 and θ = 90°, the arc is 31.4159 ÷ 4 = 7.85398 and the sector is 78.5398 ÷ 4 = 19.6350. At 360° the arc is the whole circumference and the sector the whole area. At 180° each is half.

Units

The calculator has no units of its own: lengths come out in whatever unit you entered and areas in its square. A radius in centimetres gives a circumference in centimetres and an area in square centimetres. Be careful with the area: if the radius is in metres, the area is in square metres, and converting between units must use the squared factor. For that use the area converter.

Doubling the radius

Because area depends on the square of the radius, a circle twice as wide has four times the area, and one three times as wide has nine times. A 12-inch pizza (radius 6) has 36π square inches of area against 16π for an 8-inch one (radius 4), which is 2.25 times as much for a width 1.5 times as great.

Radius Circumference Area
1 6.28318530718 3.14159265359
2 12.5663706144 12.5663706144
5 31.4159265359 78.5398163397
10 62.8318530718 314.159265359

At a radius of 2 the circumference and the area are the same number, 4π, though in different units.

Common mistakes

  • Using the diameter in the area formula. Area is π × radius², so halve the diameter first.
  • Mixing up circumference and area. Circumference is a length, area a surface. 2πr and πr² differ.
  • Rounding π to 3.14 and then rounding again. The page uses π to 50 digits and rounds only the answer.
  • Forgetting to square the unit. An area in square units cannot be added to a length.
  • Entering an angle in radians. The angle here is in degrees.

How it is calculated

The size you enter is read as an exact decimal and turned into a radius: a diameter is halved, a circumference divided by 2π, and an area divided by π and square-rooted. Circumference is 2πr and area πr², using π to 50 digits from the arccosine of −1. The arc and sector multiply those by the angle divided by 360. Every figure is shown to 12 significant digits.

Frequently asked questions

How do I find the area of a circle?

Area = π × radius². For a radius of 5, the area is π × 25 = 78.5398. If you know the diameter, halve it first: a diameter of 10 is a radius of 5.

How do I find the circumference of a circle?

Circumference = 2 × π × radius, or π × diameter. A circle with a radius of 5 has a circumference of 10π = 31.4159.

How do I find the radius from the circumference?

Divide the circumference by 2π. A circumference of 10 gives a radius of 10 ÷ 6.28319 = 1.59155.

How do I find the radius from the area?

Divide the area by π and take the square root. An area of 100 gives √(100 ÷ π) = √31.8310 = 5.64190.

What are an arc and a sector?

An arc is part of the circumference and a sector is the slice of area it bounds. For a central angle of 90°, each is a quarter of the whole. Arc = C × angle ÷ 360 and sector = A × angle ÷ 360.

How accurate is the value of π?

The page works with π to 50 digits, so the figures are limited by the 12 significant digits it shows, not by the value of π.

Related calculators

Sources