Lumens to Watts Converter (by Bulb Efficacy)
Enter the light output in lumens and the efficacy of the bulb in lumens per watt. Watts equal lumens divided by efficacy, so the answer depends on the kind of bulb.
Last reviewed
Power for that light
8 W
800 lumens at 100 lumens per watt
- Incandescent (800 lm for 60 W): 13.33 lm/W
- 60 W
- LED at the table’s low end (800 lm for 10.5 W): 76.19 lm/W
- 10.5 W
- LED at the table’s high end (800 lm for 5.9 W): 135.59 lm/W
- 5.9 W
- SI value for monochromatic light (683 lm/W): 683 lm/W
- 1.17 W
Watts measure the power a bulb uses and lumens the light it gives, so there is no fixed conversion. The efficacy decides it. The presets use the Department of Energy’s 800 lumen row.
There is no single conversion
Lumens measure the light a bulb gives. Watts measure the power it uses. The US Department of Energy puts it this way: lumens are “a measure of the total amount of visible light emitted by a source”, while watts are a measure of power input. How many lumens you get from each watt depends on the bulb, and that ratio is called its luminous efficacy, in lumens per watt (lm/W).
Watts = lumens ÷ efficacy.
So the same 800 lumens needs about 60 watts from an old incandescent bulb and well under 11 watts from an LED. This page does the division for the efficacy you enter, and shows what the Department of Energy’s figures imply for different kinds of bulb.
What the Department of Energy lists
The DOE’s table of light output against power input for incandescent and LED bulbs reads:
| Light output (lumens) | Incandescent (W) | LED (W) |
|---|---|---|
| 450 | 40 | 4.5 to 7 |
| 800 | 60 | 5.9 to 10.5 |
| 1,100 | 75 | 9.5 to 14 |
| 1,600 | 100 | 10.5 to 18 |
Dividing each row gives the efficacy it implies. The incandescent bulbs work out at 450 ÷ 40 = 11.25, 800 ÷ 60 = 13.33, 1,100 ÷ 75 = 14.67 and 1,600 ÷ 100 = 16 lumens per watt. The LED ranges are much wider, from 450 ÷ 7 = 64.3 lm/W at the lowest to 800 ÷ 5.9 = 135.6 lm/W at the highest.
| Light output (lumens) | Incandescent (lm/W) | LED, lowest (lm/W) | LED, highest (lm/W) |
|---|---|---|---|
| 450 | 11.25 | 64.29 | 100 |
| 800 | 13.33 | 76.19 | 135.59 |
| 1,100 | 14.67 | 78.57 | 115.79 |
| 1,600 | 16 | 88.89 | 152.38 |
Worked examples
- 800 lumens at 100 lm/W: 800 ÷ 100 = 8 W.
- 800 lumens as an incandescent bulb: the table’s 60 W bulb gives 800 ÷ 60 = 13.33 lm/W, and 800 ÷ 13.33 = 60 W.
- 1,000 lumens at 80 lm/W: 1,000 ÷ 80 = 12.5 W.
- An LED pack that says 800 lumens and 9 W: its efficacy is 800 ÷ 9 = 88.89 lm/W.
Watts for a given brightness
| Light output (lumens) | At 80 lm/W | At 100 lm/W | At 120 lm/W |
|---|---|---|---|
| 450 | 5.63 | 4.5 | 3.75 |
| 800 | 10 | 8 | 6.67 |
| 1,100 | 13.75 | 11 | 9.17 |
| 1,600 | 20 | 16 | 13.33 |
A theoretical ceiling
The SI definition of the candela fixes the luminous efficacy of monochromatic radiation of frequency 540 × 10¹² hertz at exactly 683 lumens per watt, as NIST explains. A real lamp makes a mixture of colours and loses energy as heat, so its efficacy is far below that. The calculator accepts efficacies up to 683 and rejects anything above, since the figure cannot be real.
Choosing a bulb
Look at the lumens first and then pick the bulb with the lowest watts, which is the same as the highest efficacy. The Department of Energy says it is important to consider lumens when comparing bulbs, because lumens measure the light given and watts only the power used. The label on a pack gives both. For the running cost of a bulb, see the LED savings calculator.
Common mistakes
- Comparing watts across bulb types. A 10 W LED and a 10 W incandescent bulb give very different light.
- Treating “equivalent” watts as real watts. A pack may say “60 W equivalent”. The real power is the smaller wattage printed next to it.
- Using an efficacy for the wrong kind of bulb. The incandescent figures here are 11 to 16 lm/W and an LED is several times that.
- Expecting a fixed conversion. The same lumens need different watts for different bulbs.
For electrical current, use the watts to amps calculator and the amps to watts calculator. For other power units, the power converter.
How it is calculated
Watts = lumens ÷ efficacy, in 40-digit decimal arithmetic, rounded to two places for display. The presets are the efficacies implied by the 800-lumen row of the DOE table: 800 ÷ 60, 800 ÷ 10.5 and 800 ÷ 5.9, plus the SI value of 683.
Frequently asked questions
How many watts is 800 lumens?
It depends on the bulb. The Department of Energy pairs 800 lumens with a 60 W incandescent bulb and with an LED of 5.9 to 10.5 W. At 100 lumens per watt, 800 lumens is 8 watts.
How do I convert lumens to watts?
Divide the lumens by the bulb’s efficacy in lumens per watt. For 1,000 lumens at 80 lm/W that is 12.5 watts. There is no fixed factor, because different bulbs give different light for the same power.
What is luminous efficacy?
It is the light output divided by the power input, in lumens per watt. The DOE table implies about 11 to 16 lm/W for incandescent bulbs and 64 to 152 lm/W for LEDs. A higher figure means a more efficient bulb.
What is the highest possible lumens per watt?
The SI sets the luminous efficacy of monochromatic radiation at 540 THz at exactly 683 lumens per watt. A real lamp makes mixed colours and heat, so it is well below that, and the calculator caps efficacy at 683.
Is "60 W equivalent" the power the bulb uses?
No. It means the bulb gives about the light of a 60 W incandescent bulb, around 800 lumens. The real power is the smaller wattage on the pack, often between 6 and 11 W for an LED according to the DOE table.
Should I compare bulbs by watts or lumens?
Use lumens to compare brightness. The Department of Energy says it is important to consider lumens, the total visible light emitted, while watts measure the power input. Then choose the lower watts for the lumens you need.
Related calculators
- LED Savings CalculatorEnter the watts of your old bulbs and the LED, the hours they are on and your electricity price.
- Watts to Amps CalculatorEnter the power and the voltage.
- Amps to Watts CalculatorEnter the current and the voltage.
- Power ConverterEnter a power and choose the two units.
- Energy ConverterEnter an energy and choose the two units.
- Unit ConverterPick what you are converting, enter a value, choose the two units, and read the answer.