Significant Figures Calculator: Count and Round Sig Figs
Type a number as it is written and choose to count its significant figures or round it to a set number. You will see the digits that count, the rounded value and its scientific notation.
Last reviewed
Rounded to 3 significant figures
1230
1.23 × 10³ · the original has 8
- Figures in the original
- 8
- The significant digits
- 12345678
- Scientific notation
- 1.23 × 10³
- Rounding changed it by
- -4.5678
- A tie (exactly a half)?
- no
Trailing zeros of a whole number without a decimal point are not counted: 1200 has 2. Write 1200. or 1.200E3 to show 4. Leading zeros never count, and trailing zeros after a decimal point do.
What significant figures are
The significant figures (or significant digits) of a number are the digits that say something real about how precisely it is known. A length written as 12.30 m claims to be measured to the nearest hundredth of a metre, so all four digits are significant. A length written as 12.3 m claims only the nearest tenth. Writing the extra 0 changes what the number says.
Counting them is a matter of a few rules, applied to the number as it is written.
The rules for counting
- Every non-zero digit is significant. 4,732 has 4.
- Zeros between significant digits are significant. 1,005 has 4, and 20.08 has 4.
- Leading zeros are not significant. They only place the decimal point. 0.0045 has 2.
- Trailing zeros after a decimal point are significant. 4.500 has 4, and 0.00450 has 3.
- Trailing zeros in a whole number with no decimal point are not counted. 1,200 has 2, because the zeros may only be placeholders. Writing 1,200. (with the point) or 1.200 × 10³ shows all four.
- A zero has one significant figure.
| Number | Significant figures | Digits that count |
|---|---|---|
| 12,345 | 5 | 12345 |
| 1,005 | 4 | 1005 |
| 1,200 | 2 | 12 |
| 1,200. | 4 | 1200 |
| 0.0045 | 2 | 45 |
| 0.00450 | 3 | 450 |
| 100.5 | 4 | 1005 |
| 3.000 | 4 | 3000 |
| 1.20E5 | 3 | 120 |
| 1.200E3 | 4 | 1200 |
Scientific notation removes the doubt about trailing zeros: all the digits of the mantissa count. So 4.56 × 10⁴ has 3 and 4.5600 × 10⁴ has 5, though both equal about 45,600. The scientific notation calculator converts between the forms.
Rounding to n significant figures
Keep the first n significant digits, then round on the digit that follows. The leading zeros of a small number do not count, so the page counts from the first non-zero digit.
- 1,234.5 to 3 figures: keep 1, 2, 3 and look at 4: round down. 1,230 (1.23 × 10³). That last zero is a placeholder and is not significant.
- 0.00456789 to 3 figures: keep 4, 5, 6 and look at 7: round up. 0.00457 (4.57 × 10⁻³).
- 99.96 to 3 figures: keep 9, 9, 9 and look at 6: round up, which carries through: 100 (1.00 × 10²).
- 2.5 to 3 figures: nothing to drop; the result shows the figures asked for: 2.50.
- 123,456 to 2 figures: 120,000.
Ties
When the digits dropped are exactly a 5, the number is exactly halfway between two candidates. Rounding half up sends it up. The NIST rule (in Appendix B of its guide to the SI) sends it to the even digit, so that ties do not always go the same way. NIST’s examples: 6.9749515 rounded to 7 digits is 6.974952 (the 1 is odd, so it goes up), and 6.9749505 to 7 digits is 6.974950 (the 0 is even, so it stays). The page shows which one applies and lets you choose. For more on the rules see the rounding calculator.
A 5 followed by any non-zero digit is not a tie: 6.97495051 to 7 figures is 6.974951.
Why precision matters
A measurement can only be as good as the instrument. A ruler marked in millimetres can give 12.3 cm, but not 12.34 cm. Calculations then have to avoid claiming more precision than the inputs have. The common conventions are:
- Multiplying and dividing: give the answer with as many significant figures as the input with the fewest. 2.5 × 3.42 = 8.55, written as 8.6 (2 figures).
- Adding and subtracting: give the answer to the decimal place of the least precise input. 12.3 + 0.456 = 12.756, written as 12.8 (one decimal place).
Conventions differ between courses and laboratories, so use the one you were set. And keep full precision through a calculation, rounding only at the end. The percent error calculator shows how an error relates to a measurement.
Common mistakes
- Counting leading zeros. 0.0045 has 2 figures, not 5.
- Dropping trailing zeros after a point. 4.500 has 4 figures, not 1, and the zeros mean something.
- Counting trailing zeros in a plain whole number. 1,200 has 2 unless a decimal point or scientific notation says otherwise.
- Rounding too early. Round once, at the end of a calculation.
- Rounding to decimal places when significant figures are asked for. 0.00456 to 2 decimal places is 0.00, but to 2 significant figures it is 0.0046.
Related calculators
- Rounding calculator, for decimal places and every rounding rule.
- Scientific notation calculator.
- Percent error calculator, average calculator and statistics calculator.
How it is calculated
The number is read exactly as written. To count, the digits of the mantissa (before any E) are examined: leading zeros are dropped, and trailing zeros are dropped unless a decimal point is written. To round, the exact decimal is rounded to n significant digits by half up or half even in 400-digit arithmetic, then written with enough decimal places to show n figures. A tie is found by checking whether the scaled number ends in exactly one half, and the page reports the exact change the rounding made.
Frequently asked questions
What are significant figures?
The digits of a number that carry meaning about its precision: all non-zero digits, zeros between them, and trailing zeros after a decimal point. 0.00450 has 3 (4, 5 and the final 0), and 1,005 has 4.
Do leading zeros count?
No. They only show where the decimal point is. 0.0045 has 2 significant figures, the same as 4.5, and 0.0045 = 4.5 × 10⁻³.
Do trailing zeros count?
After a decimal point, yes: 4.500 has 4 and 0.00450 has 3. In a whole number with no point they are not counted, because they may only be placeholders: 1,200 has 2, while 1,200. or 1.200 × 10³ has 4.
How do I round to significant figures?
Keep the first n significant digits and round the rest. 1,234.5 to 3 figures is 1,230, and 0.00456789 to 3 figures is 0.00457. The leading zeros of a small number are not counted.
What if the dropped digits are exactly a 5?
It is a tie. Rounding half up sends it up. The NIST rule sends it to the even digit, so 6.9749505 to 7 figures is 6.974950 but 6.9749515 is 6.974952. The page lets you choose.
How many significant figures should an answer have?
For multiplication and division, the answer is usually given with as many figures as the least precise input. For addition and subtraction, it follows the least precise decimal place. Your course or lab sets the exact convention.
Related calculators
- Rounding CalculatorEnter a number, the decimal places and a rounding rule.
- Scientific Notation CalculatorType a number such as 12345.
- Percent Error CalculatorEnter the value you measured and the accepted value.
- Average CalculatorPaste a list of numbers to get the average, with the sum, count, smallest and largest.
- Statistics CalculatorEnter your numbers, separated by commas, spaces or new lines.
- Scientific CalculatorType an expression or use the keys.
- Binary CalculatorEnter two binary numbers and pick an operation.