One Rep Max Calculator (1RM)
Enter the weight you lifted and how many times you lifted it. You get your estimated one-rep max by three formulas and their average, and a table of weights at 50% to 100% of it.
Last reviewed
Estimated one-rep max
113.9 kg
the average of three formulas, from 100 kg × 5
| Formula | 1RM |
|---|---|
| Epley | 116.7 kg |
| Brzycki | 112.5 kg |
| O'Connor | 112.5 kg |
| Percent | Weight |
|---|---|
| 100% | 113.9 kg |
| 95% | 108.2 kg |
| 90% | 102.5 kg |
| 85% | 96.8 kg |
| 80% | 91.1 kg |
| 75% | 85.4 kg |
| 70% | 79.7 kg |
| 65% | 74 kg |
| 60% | 68.3 kg |
| 55% | 62.6 kg |
| 50% | 56.9 kg |
These are estimates. Do not attempt a true one-rep max without a spotter or safety equipment, and build up to heavy loads gradually.
What a one-rep max is
Your one-rep max (1RM) is the heaviest weight you can lift once, with good form, in a given exercise. Strength training programmes often set loads as a percentage of it: “3 sets of 5 at 80%”. The trouble is that testing a true max is hard on the body and carries some risk, so people estimate it from a lighter set done to or near failure.
The formulas
If you lift a weight w for r repetitions, these formulas estimate the 1RM:
| Formula | Year | Estimate |
|---|---|---|
| Epley | 1985 | w × (1 + r ÷ 30) |
| Brzycki | 1993 | w × 36 ÷ (37 − r) |
| O’Connor | 1989 | w × (1 + 0.025 × r) |
Brzycki’s can also be written as w ÷ (1.0278 − 0.0278 × r), and Epley’s as w × (1 + 0.0333 × r). A set of one repetition is simply your max, so for r = 1 the calculator returns the weight lifted. Epley’s formula would add 3.3% to a single rep, which is a known quirk of the formula and not what anyone means by a 1RM.
Worked example: 100 kg for 5 reps
- Epley: 100 × (1 + 5 ÷ 30) = 116.7 kg.
- Brzycki: 100 × 36 ÷ (37 − 5) = 3,600 ÷ 32 = 112.5 kg.
- O’Connor: 100 × (1 + 0.025 × 5) = 112.5 kg.
- Average: 113.9 kg.
The calculator gives the average as the headline and shows each formula, because they differ more as the reps increase.
| Weight × reps | Epley | Brzycki | O’Connor | Average |
|---|---|---|---|---|
| 100 × 3 | 110.0 | 105.9 | 107.5 | 107.8 |
| 100 × 5 | 116.7 | 112.5 | 112.5 | 113.9 |
| 100 × 8 | 126.7 | 124.1 | 120.0 | 123.6 |
| 100 × 10 | 133.3 | 133.3 | 125.0 | 130.6 |
| 80 × 6 | 96.0 | 92.9 | 92.0 | 93.6 |
| 225 × 5 | 262.5 | 253.1 | 253.1 | 256.3 |
At 10 reps the spread is 8.3 kg on 100 kg, compared with 4.2 kg at 5 reps. That is why shorter sets give a firmer estimate.
How accurate are the estimates?
They are rough. A 2024 study in the journal Sports tested 40 older adults, aged 73 on average, with osteopenia or osteoporosis, on several machines, and compared real 1RMs with predictions from sets of 5 to 8, 9 to 12 and 13 to 16 repetitions. The equations from the literature were off by about 4% to 13% on average, depending on the exercise and the equation. The authors built new, exercise-specific equations for that group. That was a particular group, not everyone, but it shows why any estimate is a guide and not a measurement. The exercise matters too, since the size of the error changed from one machine to another in that study.
What percentage of your 1RM is a set of n reps?
Turned round, the same formulas tell you what you can lift for a number of reps if you know your max:
| Reps | Brzycki | Epley | O’Connor |
|---|---|---|---|
| 2 | 97.2% | 93.8% | 95.2% |
| 3 | 94.4% | 90.9% | 93.0% |
| 4 | 91.7% | 88.2% | 90.9% |
| 5 | 88.9% | 85.7% | 88.9% |
| 6 | 86.1% | 83.3% | 87.0% |
| 8 | 80.6% | 78.9% | 83.3% |
| 10 | 75.0% | 75.0% | 80.0% |
| 12 | 69.4% | 71.4% | 76.9% |
Use the chart in the calculator to turn those percentages into plate weights for your own max. If your 1RM is 113.9 kg, 80% is 91.1 kg.
Safety
Do not try to find a true one-rep max alone. Use a spotter or safety bars, warm up well and add weight in steps. Many lifters never test it and use the estimate from a set of a few reps. If you are new to lifting or have a health condition, speak to a qualified coach or your doctor first. This page is information, not training or medical advice.
Common mistakes
- Using sets that are not close to failure. The formulas assume you could not do many more reps.
- Using a long set. Estimates from long sets are less reliable, so use a heavier weight and fewer reps where you can.
- Comparing exercises. A 1RM for one lift says nothing about another.
- Treating the number as exact. Allow for several percent either way.
- Forgetting form. A rep with bad form does not count towards the estimate.
Related calculators
- Lean body mass calculator and BMI calculator.
- TDEE calculator and calorie calculator.
- Weight calculator and percentage calculator.
How it is calculated
Each estimate is computed in exact decimal arithmetic from the weight and the repetitions, and rounded to one decimal place. The average is the mean of the three unrounded estimates. The percentage table multiplies the average by the percentage and rounds to one decimal place.
Frequently asked questions
What is a one-rep max?
The heaviest weight you can lift for one repetition of an exercise with good form. It is used to set training loads as a percentage, such as sets at 75% of your max. Testing it directly is tiring and risky, so it is usually estimated from a lighter set.
How do you estimate a 1RM from a set?
Lift a weight to or near failure and count the reps, then use a formula. Epley: weight × (1 + reps ÷ 30). Brzycki: weight × 36 ÷ (37 − reps). O'Connor: weight × (1 + 0.025 × reps). For 100 kg for 5 reps they give 116.7, 112.5 and 112.5 kg.
Which formula is the most accurate?
None is best for everyone. A 2024 study of 40 older adults found that, depending on the exercise, equations from the literature missed the real 1RM by about 4% to 13% on average, so treat any estimate as a guide. The calculator shows three and their average so you can see the spread.
How many reps should I use?
The studies behind these equations used sets of about 5 to 8 repetitions. Estimates from longer sets are less reliable, because fatigue rather than strength ends a long set, so use a heavier weight and fewer reps if you can. A set of one is your actual max, so the calculator shows the weight as it is.
What percentage of my 1RM is a set of 10?
By the Brzycki formula, 75%: you can lift about 75% of your max for 10 reps. By Epley it is also 75.0% and by O'Connor 80%. The chart on the page shows the percentage for other rep counts.
Is it safe to test a true one-rep max?
Only with a spotter or safety bars, a good warm-up and gradually heavier attempts. Many lifters never test it and use the estimate from a set of 3 to 5 reps. If you have a health condition or are new to lifting, ask a qualified coach or your doctor first.
Related calculators
- BMI CalculatorEnter your height and weight.
- TDEE CalculatorEnter your sex, age, height and weight and choose how active you are.
- Calorie CalculatorEnter your sex, age, height, weight and activity level to see the calories you are estimated to use, then choose a daily difference to see a target.
- Lean Body Mass CalculatorEnter your sex, height and weight.
- Weight CalculatorEnter a mass and choose where it is.
- Percentage CalculatorPick the question you are actually asking.
- Calories Burned CalculatorChoose an activity, how long you did it and your weight.
- Cycling Power to Weight CalculatorEnter your power, as FTP or a 20-minute average, and your weight.
Sources
- Developing Accurate Repetition Prediction Equations for Trained Older Adults with Osteopenia. Sports (Basel) 2024 (PubMed 39330710)
- Fitness profile and training of Special Operation Forces: a comparison with sports athletes. Front Sports Act Living 2025 (PubMed 40469387)
This tool is for information only and is not medical advice. Speak to a doctor or a qualified professional about your own health.