Skip to content
thecalculatorstudio

Hertz to Seconds Converter (Frequency to Period)

Enter a frequency and read the time one cycle takes, or enter a time and read the frequency. They are reciprocals: 50 Hz repeats every 0.02 seconds.

Last reviewed

Time for one cycle

20 ms

50 Hz repeats once every 20 ms

Common frequencies and their periods
FrequencyPeriod
50 Hz20 ms
60 Hz16.6667 ms
440 Hz2.27273 ms
1 kHz1 ms
1 MHz1 µs
1 GHz1 ns
3 GHz333.333 ps
3,000 rpm20 ms

Frequency and period are reciprocals: period = 1 ÷ frequency. A frequency of zero never repeats, so it has no period.

The conversion

Period in seconds = 1 ÷ frequency in hertz.

Frequency says how often something repeats each second. The period says how long one repeat takes. They are two ways of describing the same thing, and each is the reciprocal of the other:

  • Hertz to seconds: 1 ÷ frequency.
  • Seconds to hertz: 1 ÷ time.

A hertz is one cycle per second. NIST notes that the hertz is equal to the reciprocal second, s⁻¹, so the unit already contains the sum.

Common frequencies and their periods

Frequency Time for one cycle
1 Hz 1 s
50 Hz 20 ms
60 Hz 16.6667 ms
440 Hz 2.2727 ms
1 kHz 1 ms
1 MHz 1 µs
1 GHz 1 ns
3 GHz 333.33 ps
3,000 rpm 20 ms

The pattern is that every thousand-fold step up in frequency gives a thousand-fold shorter period.

Worked examples

50 Hz. 1 ÷ 50 = 0.02 seconds, which is 20 milliseconds.

60 Hz. 1 ÷ 60 = 0.016667 seconds, which is 16.6667 milliseconds. This is why 60 Hz and 50 Hz mains differ by a little under 4 milliseconds a cycle.

440 Hz, the pitch many instruments tune to: 1 ÷ 440 = 2.2727 milliseconds per cycle.

2.4 GHz. 2.4 × 10⁹ cycles a second means a period of 1 ÷ 2,400,000,000 = 0.41667 nanoseconds, which is 416.67 picoseconds.

The other way. A signal that repeats every 10 milliseconds is 1 ÷ 0.01 = 100 Hz. One that repeats every microsecond is 1 MHz.

Revolutions per minute

Rotating machinery is usually rated in revolutions per minute, not hertz. There are 60 seconds in a minute, so:

  • rpm ÷ 60 = hertz
  • 60 ÷ rpm = seconds per revolution
Speed Hertz Time per revolution
60 rpm 1 Hz 1 s
3,000 rpm 50 Hz 20 ms
7,200 rpm 120 Hz 8.3333 ms

A shaft turning at 3,000 rpm completes 50 revolutions each second, one every 20 milliseconds.

The prefixes

NIST lists the prefixes in the metric system, and they apply to hertz as to any other unit.

Prefix Symbol Power of ten Example
kilo k 10³ kHz, a thousand cycles a second
mega M 10⁶ MHz, a million
giga G 10⁹ GHz, a billion
tera T 10¹² THz, a trillion

And the short times that go with them: milli (10⁻³), micro (10⁻⁶), nano (10⁻⁹) and pico (10⁻¹²) seconds.

What frequency and period are used for

  • Electricity. Mains supplies are described by their frequency, and the period tells you how long each cycle lasts.
  • Sound. The pitch of a note is its frequency. A higher pitch has a shorter period.
  • Electronics and computing. A clock speed in gigahertz means a cycle of well under a nanosecond.
  • Machinery. The speed of a motor, a fan or a drive in rpm, and the interval between revolutions.
  • Vibration and waves. The time between peaks.

Checking your answer

Two quick tests:

  • A high frequency has a short period. If you converted a gigahertz figure and got a long time, the division is upside down.
  • Multiplying the two gives 1. Frequency in hertz times period in seconds is always 1. For 50 Hz, 50 × 0.02 = 1.

Common mistakes

  • Multiplying instead of dividing. The relationship is a reciprocal, not a proportion.
  • Mixing prefixes. 1 MHz is a microsecond, not a millisecond. Each prefix is a thousand times from the next.
  • Using rpm as hertz. Divide rpm by 60 first.
  • A frequency of zero. It never repeats, so it has no period, and the converter says so.

For the speed of something moving rather than turning, use the speed converter. For changes in speed, the acceleration converter. For data rates, see the data storage converter.

How it is calculated

The frequency is converted to hertz using exact factors, with rpm as one sixtieth of a hertz. The period in seconds is 1 divided by that, and it is expressed in the time unit you chose. Going the other way, the time is converted to seconds and divided into 1. The arithmetic is in 40-digit decimals, and the answer is rounded only for display.

Frequently asked questions

How do I convert hertz to seconds?

Divide 1 by the frequency in hertz. The result is the time in seconds for one cycle, the period. 50 Hz is 1 ÷ 50 = 0.02 seconds, or 20 milliseconds.

How do I convert seconds to hertz?

Divide 1 by the time in seconds. A cycle that takes 0.01 seconds is 1 ÷ 0.01 = 100 Hz, and one that takes 2 seconds is 0.5 Hz.

What is a hertz?

One cycle per second. NIST notes that the hertz is equal to the reciprocal second, s⁻¹. A frequency of 1 Hz repeats once a second and 1 kHz repeats a thousand times a second.

How long is one cycle of 60 Hz?

16.6667 milliseconds. 1 ÷ 60 = 0.016667 seconds. A 50 Hz supply has a cycle of 20 milliseconds.

How do I convert rpm to hertz and seconds?

Divide rpm by 60 to get hertz. 3,000 rpm is 50 Hz, a period of 20 milliseconds; 60 rpm is 1 Hz, a period of 1 second.

What are the periods of MHz and GHz?

1 MHz repeats every microsecond, and 1 GHz every nanosecond. A 3 GHz clock has a cycle of 333.33 picoseconds. Each step up in prefix shortens the period a thousand times.

Related calculators

Sources