Skip to content
thecalculatorstudio

Half-Life Calculator (Radioactive Decay)

Choose what you want to find: the amount remaining, the time taken, the half-life or the starting amount. Enter the rest in any units, or start from a known isotope such as carbon-14 or iodine-131.

Last reviewed

Amount remaining

13.91

13.91% left after 2.846 half-lives

0123456half-lives
Half-lives passed
2.846
Percent decayed
86.09%
Decay constant (per year)
0.1315
Mean lifetime (years)
7.603
Amount left after each half-life
Half-livesFractionAmount
01100
10.550
20.2525
30.12512.5
40.06256.25
50.031253.125
60.0156251.563
70.00781250.7813
80.003906250.3906
90.0019531250.1953
100.00097656250.09766

Published half-lives differ slightly between data sources, so use the value your course or data sheet gives. Decay is random for single atoms, so these figures describe large samples.

What a half-life is

The half-life of a radioactive substance is the time it takes for half of the atoms in a sample to decay. It is a fixed property of each isotope. It does not depend on how much you start with, nor on temperature or pressure. After one half-life 50% is left, after two half-lives 25%, after three 12.5%, and so on, halving each time.

Half-lives passed Percent left Fraction left
0 100% 1/1
1 50% 1/2
2 25% 1/4
3 12.5% 1/8
4 6.25% 1/16
5 3.125% 1/32
6 1.5625% 1/64
7 0.78125% 1/128
8 0.390625% 1/256
9 0.1953125% 1/512
10 0.09765625% 1/1024

The formulas

N = N₀ × (1/2)^(t ÷ T)

where N₀ is the starting amount, N the amount left, t the time and T the half-life. Time and half-life must be in the same unit. The amounts can be in any unit (grams, atoms, becquerels) so long as both use the same one.

The same law is usually written with the decay constant λ (lambda):

N = N₀ × e^(−λt), with λ = ln 2 ÷ T (about 0.693 ÷ T)

and the mean lifetime is 1 ÷ λ = T ÷ ln 2, about 1.44 half-lives. The calculator shows both. Turned round, the time to decay from N₀ to N is t = T × log₂(N₀ ÷ N), and the half-life from a measurement is T = t × ln 2 ÷ ln(N₀ ÷ N).

Worked examples

Cobalt-60. Its half-life is 5.27 years, so λ = ln 2 ÷ 5.27 = 0.1315 per year. How much of a 100 g source is left after 15 years? That is 15 ÷ 5.27 = 2.846 half-lives, so 100 × (1/2)^2.846 = 13.91 g. The OpenStax Chemistry textbook, which rounds λ to 0.132 along the way, gets 13.8%. How long until only 2% is left? t = 5.27 × log₂(50) = 29.74 years (the book’s rounded λ gives 29.6).

Radon-222. Its half-life is 3.823 days. A 0.750 g sample decays to 0.100 g in 3.823 × log₂(7.5) = 11.11 days, the figure given in the textbook’s practice problem.

Carbon-14. Its half-life is 5,730 years. Half is left after 5,730 years and a quarter after 11,460. It takes 5,730 × log₂(10) = about 19,030 years to fall to a tenth. Radiocarbon dating measures how much carbon-14 a once-living thing has left and works back to when it stopped taking up new carbon.

Finding the half-life. A sample falls from 100 to 25 in 10 days. That is two halvings, so the half-life is 5 days. From 80 to 10 in 12 hours it is three halvings, so 4 hours.

Half-lives of some isotopes

These are the values from the OpenStax Chemistry textbook, which you can pick from the list in the calculator:

Isotope Half-life Used for
Carbon-14 5730 years radiocarbon dating
Cobalt-60 5.27 years cancer treatment
Iodine-131 8.02 days thyroid scans and treatment
Fluorine-18 110 minutes PET scans
Technetium-99m 8.01 hours brain, lung, heart and bone scans
Thallium-201 73 hours heart and artery scans
Radon-222 3.823 days a radioactive gas from the ground

Other sources round these differently (iodine-131 is quoted as 8.02, 8.04 and 8.07 days), so use the figure your course or data sheet gives.

Common mistakes

  • Mixing units. If the half-life is in years, the time must be in years too.
  • Thinking all is gone after two half-lives. Two half-lives leave a quarter, not nothing.
  • Mixing the amount units. The starting amount and the amount remaining must be in the same unit. If you enter 100 for the start, 25 means 25% of it.
  • Rounding λ too early. A rounded λ changes the answer in the third figure. This page keeps full precision.
  • Treating a single atom as predictable. The half-life describes a large sample. When any one atom will decay is random.

How it is calculated

The amount left is N₀ × 2^(−t ÷ T), worked in 40-digit decimal arithmetic. The time and half-life use natural logarithms: t = T × ln(N₀ ÷ N) ÷ ln 2. Results are shown to four significant figures, and very small or very large values are written in powers of ten. The calculator stops at 100,000 half-lives.

Frequently asked questions

What is a half-life?

The time it takes for half of a sample of a radioactive substance to decay. After one half-life 50% is left, after two 25%, after three 12.5%, and so on. Cobalt-60 has a half-life of 5.27 years, so a source loses half its activity every 5.27 years.

What is the half-life formula?

N = N0 × (1/2)^(t ÷ T), where N0 is the starting amount, T the half-life and t the time elapsed. The same thing can be written N = N0 × e^(−λt), with the decay constant λ = ln 2 ÷ T, about 0.693 ÷ T.

How do I find how long something takes to decay?

Use t = T × log₂(N0 ÷ N). Radon-222, with a half-life of 3.823 days, takes 3.823 × log₂(0.750 ÷ 0.100) = 11.11 days to go from 0.750 g to 0.100 g.

How many half-lives until it is effectively gone?

It never reaches exactly zero, but each half-life halves the amount. After 10 half-lives about 0.1% is left (1/1,024), and after 20 less than a millionth. The calculator shows the amount after 0 to 10 half-lives.

What is the difference between half-life and mean lifetime?

The mean lifetime is the average time a nucleus survives, 1 ÷ λ = T ÷ ln 2, which is about 1.44 half-lives. It is longer than the half-life, because the nuclei that last a long time pull the average up.

Can I use it for things other than radioactivity?

Yes. Anything that falls by the same fraction in each equal period follows the same formula, such as a drug being cleared from the body or a quantity that loses a fixed share every year. Enter the half-life in whatever time unit you like.

Related calculators

Sources