Skip to content
thecalculatorstudio

Acres to Square Feet (ft²) Converter

Enter an area in acres and read it in square feet. An acre is exactly 43,560 square feet.

Last reviewed

To

43,560

43,560 ft², and 1 acre = 43,560 ft²

Common conversions

The conversion

1 acre = 43,560 square feet.

  • Acres to square feet: multiply by 43,560.
  • Square feet to acres: divide by 43,560.

The figure is exact. NIST’s Handbook 44 gives it as “43 560 square feet (exactly)”.

Acres Square feet
0.01 435.6
0.05 2,178
0.1 4,356
0.25 10,890
0.5 21,780
1 43,560
2 87,120
2.5 108,900
5 217,800
10 435,600
40 1,742,400
100 4,356,000
640 27,878,400

Worked examples

  • 1 acre × 43,560 = 43,560 ft2
  • 0.25 acre × 43,560 = 10,890 ft2
  • 2.5 acre × 43,560 = 108,900 ft2
  • 10 acre × 43,560 = 435,600 ft2
  • 0.1 acre × 43,560 = 4,356 ft2

Going the other way, divide by 43,560:

Square feet Acres
1,000 0.023
5,000 0.1148
10,000 0.2296
21,780 0.5
43,560 1
87,120 2
100,000 2.2957
1,000,000 22.9568

Where 43,560 comes from

An acre was a strip of ploughed land one furlong long and one chain wide. A furlong is 660 feet and a chain is 66 feet, and 660 × 66 = 43,560 square feet. That is the same as 4,840 square yards (a square yard is 9 square feet, and 43,560 ÷ 9 = 4,840) and one tenth of a square furlong. Ten square chains make an acre, which is how Handbook 44 lays it out.

In metric terms the international acre is 4,046.8564224 square metres, or 0.40468564224 hectares, both exact. 43,560 square feet of 0.09290304 m² each gives exactly that.

What an acre looks like

An acre is not a particular shape. A square acre is about 208.71 feet on each side, because the square root of 43,560 is 208.71. An acre could equally be a strip 66 feet wide and 660 feet long, or a rectangle 100 feet by 435.6 feet. Handbook 44 makes the same point: an acre is a measure of area, not a shape. A quarter of an acre is 10,890 square feet, and 640 acres make a square mile.

Doing it in your head

Multiplying by 43,560 is awkward, so break it up. For 2.5 acres: 2 × 43,560 = 87,120, plus half of 43,560 = 21,780, giving 108,900. For a quick estimate use 44,000 and take off 1%: 10 acres is about 440,000 less 4,400, which is 435,600. A half acre is 21,780 square feet and a tenth of an acre is 4,356.

Going back from square feet, divide by about 43,560: 10,890 is a quarter, 21,780 is a half and 43,560 is one acre.

Common mistakes

  • Using the US survey acre figure. There is a slightly different acre based on the US survey foot, which NIST lists at about 4,046.873 square metres. The difference is about four parts per million, so it does not affect ordinary use. This page uses the international acre of 43,560 square feet.
  • Mixing up acres and hectares. A hectare is 10,000 square metres, about 2.47 acres. The two are not the same unit.
  • Reading a lot size in square feet as an acre figure. An 87,120 square foot plot is 2 acres, not 87,120.
  • Dividing when you should multiply. An acre is much bigger than a square foot, so an area in acres is a smaller number than the same area in square feet.

How it is calculated

Each area unit is stored as an exact number of square metres: an acre as 4,046.8564224 and a square foot as 0.09290304. The converter multiplies by the starting unit’s factor and divides by the target unit’s, in 40-digit decimal arithmetic, so acres to square feet is the input times exactly 43,560. Only the number on screen is rounded.

Frequently asked questions

How many square feet are in an acre?

Exactly 43,560. An acre is 43,560 square feet, which is 4,840 square yards or 4,046.8564224 square metres.

How do I convert acres to square feet?

Multiply the acres by 43,560. 2.5 acres is 108,900 square feet, and a quarter of an acre is 10,890.

How do I convert square feet to acres?

Divide the square feet by 43,560. 21,780 square feet is half an acre, and 100,000 square feet is 2.2957 acres.

How big is an acre in feet?

It depends on the shape. A square acre is about 208.71 feet on a side. A strip 66 feet wide by 660 feet long is also exactly an acre.

How many acres is a square mile?

640. A square mile is 27,878,400 square feet, which is 640 × 43,560.

Is the conversion exact?

Yes. Handbook 44 gives the acre as exactly 43,560 square feet, and the square foot is exactly 0.09290304 square metres.

Related calculators

Sources