Skip to content
thecalculatorstudio

Tire Size Calculator: Compare Two Tire Sizes

Type your current tire size and the one you are thinking of. You will see each tire's overall diameter and sidewall height, how much the diameter changes, and what your speedometer would really be doing.

Last reviewed

Overall diameter change

−3.6 mm

−0.55%: 225/50R17 to 245/40R18

True speed when the speedometer shows 100 km/h
99.5 km/h
Speedometer error
reads 0.55% high
Wheel centre height
−1.8 mm
Section width
+20 mm
Measure225/50R17245/40R18
Sidewall height (mm)112.5098.00
Overall diameter (mm)656.8653.2
Overall diameter (in)25.8625.72
Circumference (mm)2,063.42,052.1
Turns per km484.6487.3
Turns per mile779.9784.2

Theoretical diameters from the size code. Real tires differ with the make, wear, pressure and load, and a wheel must also fit the car and be approved for it. Check the car's tire placard or handbook.

Reading a tire size

The size moulded into the sidewall, such as 225/45R17, is a code with four parts:

  • 225: the nominal section width in millimetres.
  • 45: the aspect ratio, the height of the sidewall as a percentage of the width.
  • R: radial construction.
  • 17: the diameter of the rim the tire fits, in inches.

A letter in front, such as P for passenger car, and the load index and speed rating after the size are not needed for the geometry. The calculator reads any of these forms: 225/45R17, P225/45R17, 225/45 R17 and 225/45ZR17.

The formulas

The sidewall is a share of the width, so it is sidewall height = width × aspect ÷ 100. A tire stands on a rim with a sidewall above and below it, and an inch is exactly 25.4 mm, so:

Overall diameter (mm) = rim × 25.4 + 2 × sidewall height

For 225/45R17: the sidewall is 225 × 45 ÷ 100 = 101.25 mm, the rim is 17 × 25.4 = 431.8 mm, and the diameter is 431.8 + 2 × 101.25 = 634.3 mm, or 24.97 inches. The circumference is π × the diameter, and the number of turns in a distance is the distance divided by the circumference.

Common sizes

Size Sidewall (mm) Diameter (mm) Diameter (in)
195/65R15 126.75 634.5 24.98
205/55R16 112.75 631.9 24.88
215/60R16 129 664.4 26.16
225/45R17 101.25 634.3 24.97
225/50R17 112.5 656.8 25.86
235/45R17 105.75 643.3 25.33
245/40R18 98 653.2 25.72
255/35R19 89.25 661.1 26.03
265/70R16 185.5 777.4 30.61

These are theoretical diameters. The real diameter of a given tire is in the maker’s data and changes with wear, pressure and load.

Why the speedometer changes

A speedometer works from the number of times the wheels turn. If the new tire is bigger around, each turn covers more road, so you go faster than the dial says. If it is smaller, you go slower than it says. The true speed is:

True speed = speed shown × new diameter ÷ old diameter

Worked examples

Plus sizing: 225/50R17 to 245/40R18. The old diameter is 656.8 mm and the new one is 653.2 mm: a change of −3.6 mm, or −0.55%. With the speedometer showing 100 km/h, the true speed is 100 × 653.2 ÷ 656.8 = 99.45 km/h. The speedometer reads 0.55% high. The wheel centre sits 1.8 mm lower. The wider tire is 20 mm wider.

Lower profile on the same rim: 225/50R17 to 225/45R17. The sidewall drops from 112.5 mm to 101.25 mm and the diameter from 656.8 to 634.3 mm, a change of −22.5 mm, or −3.43%. At a displayed 100 km/h you are doing 96.57 km/h, and the speedometer reads 3.55% high. The wheel centre sits 11.3 mm lower.

A wider tire: 225/45R17 to 235/45R17. The sidewall grows from 101.25 to 105.75 mm and the diameter from 634.3 to 643.3 mm: +9 mm, +1.42%. At a displayed 100 km/h you are doing 101.42 km/h, and the speedometer reads 1.40% low.

The error is stated as a percentage of the true speed, so a dial showing 100 when you travel at 96.57 is 3.55% high.

What the calculator does not tell you

It only works out geometry. Whether a tire is right for your car depends on the wheel width and offset it needs, clearance in the wheel arch and against suspension parts, the load index and speed rating the car requires, and what is legal where you drive. The car’s handbook or tire placard lists the sizes the maker approves, and a tire specialist can check fit. For speed and distance units, see the speed converter and the length converter. The distance calculator measures between points and places, and the gas mileage calculator gives your true fuel economy.

Frequently asked questions

What do the numbers in 225/45R17 mean?

225 is the nominal section width in millimetres, 45 is the aspect ratio, the sidewall height as a percentage of that width, R means radial construction, and 17 is the rim diameter in inches. So the sidewall is 225 × 45% = 101.25 mm.

How do you calculate the overall diameter of a tire?

Overall diameter = rim diameter × 25.4 + 2 × sidewall height, in millimetres. For 225/45R17: 17 × 25.4 = 431.8 mm, plus 2 × 101.25 = 202.5 mm, gives 634.3 mm, or 24.97 inches.

Will a different tire size change my speedometer?

Yes, if the overall diameter changes. The speedometer counts wheel turns, so a larger tire covers more ground per turn and you travel faster than it shows. Going from 225/50R17 to 225/45R17 shrinks the diameter 3.43%, so the speedometer reads about 3.5% high.

How much diameter change is acceptable?

The calculator does not set a limit, because the right one depends on the car, its clearances and its legal requirements. Check the vehicle handbook or placard, and ask a tire specialist before fitting a size the maker does not list.

What is plus sizing?

Fitting a larger rim and a lower-profile tire so the overall diameter stays about the same. For example, 225/50R17 (656.8 mm) to 245/40R18 (653.2 mm) changes the diameter by only 0.55%, so the speedometer error is small.

Are these the exact tire diameters?

No. They are theoretical, from the size code. The real diameter depends on the make and model, and changes with wear, pressure and load. The maker's data sheet lists the actual figure for a given tire.

Related calculators

Sources