Litres (L) to Gallons (gal) Converter
Enter a volume in litres and read it in US gallons. An Imperial (UK) gallon is larger, so the page shows both.
Last reviewed
To
2.6417205 gal, and 1 L = 0.26417205 gal
Common conversions
The conversion
1 US gallon = 3.785411784 litres.
- Litres to US gallons: divide by 3.785411784, or multiply by about 0.264172.
- US gallons to litres: multiply by 3.785411784.
The US gallon is defined as exactly 231 cubic inches, and the cubic inch is exact, so the figure of 3.785411784 is exact too. A gallon is a little under 4 litres, so a number of litres is a little over a quarter as many gallons.
| Litres (L) | US gallons (gal) |
|---|---|
| 1 | 0.2642 |
| 2 | 0.5283 |
| 3.785 | 0.9999 |
| 5 | 1.3209 |
| 10 | 2.6417 |
| 20 | 5.2834 |
| 25 | 6.6043 |
| 40 | 10.5669 |
| 50 | 13.2086 |
| 60 | 15.8503 |
| 100 | 26.4172 |
| 1,000 | 264.1721 |
Which gallon?
There are two gallons in common use, and they are not the same size.
- The US gallon is 3.785411784 L. It is divided into 128 US fluid ounces.
- The Imperial gallon, used in the UK, is 4.54609 L. NIST’s Handbook 44 notes it is about 20% larger than the US gallon. It is divided into 160 Imperial fluid ounces.
Fuel economy is the usual place the two get mixed up: a car that does 40 miles per US gallon does about 48 miles per Imperial gallon. If the source is British or Canadian and old, assume Imperial. If it is American, assume US. The converter above is set to US gallons. For Imperial gallons use the second table, or choose the UK gallon in the volume converter.
| Litres (L) | Imperial gallons |
|---|---|
| 1 | 0.22 |
| 4.546 | 1 |
| 5 | 1.0998 |
| 10 | 2.1997 |
| 20 | 4.3994 |
| 25 | 5.4992 |
| 40 | 8.7988 |
| 50 | 10.9985 |
| 100 | 21.9969 |
Worked examples
- 10 l ÷ 3.785411784 ≈ 2.6417 gal-us
- 50 l ÷ 3.785411784 ≈ 13.2086 gal-us
- 3.785 l ÷ 3.785411784 ≈ 0.9999 gal-us
- 100 l ÷ 3.785411784 ≈ 26.4172 gal-us
- 0.5 l ÷ 3.785411784 ≈ 0.1321 gal-us
Going the other way, multiply by 3.785411784:
| US gallons (gal) | Litres (L) |
|---|---|
| 0.25 | 0.9464 |
| 0.5 | 1.8927 |
| 1 | 3.7854 |
| 2 | 7.5708 |
| 5 | 18.9271 |
| 10 | 37.8541 |
| 15 | 56.7812 |
| 20 | 75.7082 |
Where the number comes from
The US gallon is defined by Handbook 44 as exactly 231 cubic inches, which is also 128 US fluid ounces exactly. An inch is exactly 2.54 cm, so a cubic inch is 16.387064 mL, and 231 × 16.387064 mL = 3,785.411784 mL, which is 3.785411784 L. NIST’s conversion table lists the US gallon as 3.785 412 litres, which is the same figure to seven digits.
The Imperial gallon was fixed in terms of the volume of 10 avoirdupois pounds of water under specified conditions, and NIST lists it as 4.546 09 litres.
Doing it in your head
For a rough US figure, divide litres by 4 and add a little: 40 L is about 10 gallons, and the exact figure is 10.567. A closer rule is to divide by 4 and add 5%. For Imperial gallons, divide litres by 4.5: 45 L is about 10 Imperial gallons (exact 9.899). Going the other way, multiply gallons by 4 and subtract about 5%.
Common mistakes
- Using the wrong gallon. The two differ by about 20%. Check which country the figure comes from.
- Using 4 litres as a gallon for a precise job. That is 5.7% too big. For fuel or paint use 3.785.
- Mixing gallons with fluid ounces. There are 128 US fluid ounces in a US gallon but 160 Imperial fluid ounces in an Imperial gallon.
- Dividing when you should multiply. A gallon is larger than a litre, so there are fewer gallons than litres.
Related conversions
- Gallons to ounces, for fluid ounces in a gallon.
- Litres to ounces.
- Cubic feet to gallons, for tank and pool volumes.
- Every other volume unit: the volume converter.
How it is calculated
Each volume unit is stored as an exact number of litres: a US gallon as 3.785411784 and an Imperial gallon as 4.54609. The converter multiplies by the starting unit’s factor and divides by the target unit’s, in 40-digit decimal arithmetic, so litres to gallons is the input divided by exactly 3.785411784. Only the number on screen is rounded.
Frequently asked questions
How many litres are in a gallon?
A US gallon is exactly 3.785411784 litres. An Imperial (UK) gallon is 4.54609 litres.
How do I convert litres to gallons?
Divide the litres by 3.785411784 for US gallons. 10 L is 2.6417 US gallons, and 100 L is 26.417. For Imperial gallons divide by 4.54609: 10 L is 2.1997.
How many US gallons is 1 litre?
0.264172 US gallons, or about 0.2642. A litre is a little over a quarter of a gallon.
Is a US gallon the same as a UK gallon?
No. The Imperial gallon is 4.54609 litres, about 20% larger than the US gallon of 3.785 litres. The two also divide into different numbers of fluid ounces: 128 and 160.
How do I convert gallons to litres?
Multiply the gallons by 3.785411784 for US gallons. 5 US gallons is 18.927 litres, and 15 is 56.781 litres.
Is the conversion exact?
Yes. A US gallon is exactly 231 cubic inches, and the cubic inch is exact, which makes it exactly 3.785411784 litres. The decimal for litres to gallons repeats, so the answer on screen is rounded.
Related calculators
- Gallons to Ounces ConverterEnter a number of US gallons and read it in US fluid ounces.
- Liters to Ounces ConverterEnter a volume in litres and read it in US fluid ounces.
- Cubic Feet to Gallons ConverterEnter a volume in cubic feet and read it in gallons.
- Volume ConverterConvert any volume.
- Unit ConverterPick what you are converting, enter a value, choose the two units, and read the answer.
- Litres to Tons ConverterThere is no single number of litres in a ton, because it depends on the liquid.